TRENDnet TEG-30284WS 28-Port Web Smart Switch with 24 x Gigabit ports and 4 x 10G SFP+ slots

Posted on April 11, 2017 by

TRENDnet’s 28-Port Web Smart Switch with 24 x Gigabit ports and 4 x 10G SFP+ slots, model TEG-30284, is a cost-effective switch for high-speed network uplinks or downlink server connections. A convenient web-based management interface offers features for traffic control, troubleshooting, access control, and monitoring, allowing for network integration flexibility into an SMB network.

24 x Gigabit ports and 4 x 10G SFP+ slots for high speed connections
Easy to use web-based management interface
128 Gbps switching capacity
802.1Q, Dynamic GVRP, Private, and Voice VLAN
IGMP v1, v2, v3 snooping
STP, RSTP, and MSTP spanning tree protocols
SNMP (v1, v2c, v3), SNMP Trap, RMON, port mirror, syslog, and SMTP alert
ACLs, MAC filtering, DoS, and 802.1X / TACACS+ network access control
802.1p / DSCP / Queue Scheduling QoS support
Smart fans reduce energy consumption and auto adjust for efficiency
Limited Lifetime Warranty*

Features :

	Hardware Provides 24 x Gigabit ports, 4 x 10G SFP+ slots for high-speed network uplinks or downlink server connections, and 1U rack mountable.
	Smart Fans Smart fans saves energy by auto-adjusting the fan speed and use based on cooling needs.
	IPv6 Ready This switch supports IPv6 configuration and IPv6 neighbor discovery.
	Traffic Management A broad range of network configurations are supported by: 802.3ad link aggregation, asymmetric VLAN, 802.1Q VLAN, Voice VLAN, Private VLAN, bandwidth controls, GVRP, IGMP, 802.1p class of service (CoS), spanning tree (STP, RSTP, and MSTP), and QoS queue scheduling.
	Troubleshooting Real time traffic comparison charts, error group charts, and a convenient cable diagnostic test aid in rapid troubleshooting.
	Access Controls Features such as ACL, SSL, MAC / port filtering, Denial of Service controls, 802.1X, TACACS+, and RADIUS are compatible with layered network access controls.
	Monitoring RMON, SNMP, SNMP Trap, and Port Mirroring support administrator monitoring solutions

Diagram :

Specification :

Standards

IEEE 802.1d
IEEE 802.1p
IEEE 802.1Q
IEEE 802.1s
IEEE 802.1w
IEEE 802.1X
IEEE 802.1ab
IEEE 802.3
IEEE 802.3u
IEEE 802.3x
IEEE 802.3z
IEEE 802.3ae
IEEE 802.3ab
IEEE 802.3ad
IEEE 802.3az

Device Interface

24 x Gigabit ports
4 x 10G SFP+ slots
LED indicators

Data Transfer Rate

Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex)
Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)
Gigabit Ethernet: 2000 Mbps (full duplex)
10 Gigabit Ethernet: 20 Gbps (full duplex)

Performance

Switch fabric: 128 Gbps
RAM buffer: 1.5 MB
MAC Address Table: 16K entries
Jumbo Frames: 10 KB
HOL Blocking Prevention
Forwarding rate: 95.2 Mpps (64-byte packet size)

Management

HTTP / HTTPS (SSL v2 / 3 TLS) Web based GUI
SNMP v1, v2c, v3
RMON v1
Static Unicast MAC Address
Enable / disable 802.3az Power Saving
LLDP
Virtual Cable Test
IPv6: IPv6 Neighbor Discovery, IPv6 Static IP, DHCPv6, Auto configuration

MIB

MIB II RFC 1213
Bridge MIB RFC 1493
Bridge MIB Extension RFC 2674
SNMPv2 MIB RFC 1907
Ethernet Interface MIB RFC 1643
Ethernet –like MIB RFC 2863
Interface Group MIB RFC 2233
MIB Traps Convention RFC 1215
RMON MIB RFC 1757, RFC 2819
802.1p MIB RFC 2674
RADIUS Client Authentication MIB RFC 2618
LLDP-MIB IEEE 802.1ab
Ping MIB RFC 2925, RFC 4560

Spanning Tree

IEEE 802.1D STP (Spanning Tree protocol)
IEEE 802.1w RSTP (Rapid Spanning Tree protocol)
IEEE 802.1s MSTP (Multiple Spanning Tree protocol)

Link Aggregation

Static Link Aggregation
802.3ad Dynamic LACP

Quality of Service (QoS)

802.1p Class of Service (CoS)
DSCP (Differentiated Services Code Point)
Bandwidth Control per port
Queue Scheduling: Strict Priority, Weighted Round Robin (WRR)

VLAN

Multiple management VLAN assignment
Asymmetric VLAN
802.1Q Tagged VLAN
Dynamic GVRP
Up to 256 VLAN groups, ID Range 1-4094
Private VLAN (Protected Ports)
Voice VLAN (10 user defined OUIs)

Multicast

IGMP Snooping v1, v2, v3 (per VLAN)
Static Multicast Address
Up to 256 multicast entries

Port Mirror

RX, TX, or Both
One to one
Many to one

Access Control

802.1X Port-Based Network Access Control, RADIUS, TACACS+
Local Dial In User Authentication
DHCP Snooping (per VLAN)
Loopback Detection
Duplicated Address Detection
Trusted Host
Denial of Service (DoS)

ACL IPv4 L2-L4 & IPv6

MAC Address
VLAN ID
Ether Type (IPv4 only)
IP Protocol 0-255
TCP / UDP Port 1-65535
802.1p
DSCP (IPv4 only)
IPv6 Address (IPv6 only)

Compatibility

Optional Software Utility: Windows^® 10, 8.1, 8, 7, Vista, XP, Windows^® 2003 / 2008 Server

Special Features

High speed 10G SFP+ fiber
IPv6
Rack mountable

Power

Input: 100 – 240 V AC, 50/60 Hz, internal power supply
Consumption: 25 Watts (max.)

Fan / Acoustics

Quantity: 1
Noise Level: 50 dB(A) (max.)

MTBF

450,021 hours

Operating Temperature

0 – 50 °C (32 – 122 °F)

Operating Humidity

Max. 90% non-condensing

Dimensions

440 x 210 x 44.45 mm (17.3 x 8.27 x 1.75 in.)
Rack mountable 1U height

Weight

2.64 kg (5.81 lbs.)

Certifications

Warranty

Limited Lifetime Warranty*

TRENDnet TPE-S160 16-Port 10/100Mbps PoE Switch

Posted on February 26, 2015 by

The 16-Port 10/100Mbps PoE Switch, model TPE-S160, reduces equipment and installation costs by delivering data and power over existing Ethernet cables to Power over Ethernet (PoE) enabled devices such as Access Points and IP Cameras. Boost office efficiency and reduce network congestion with a total switching capacity of 3.2Gbps. LED indicators display device status for easy power management and troubleshooting. An internal power supply reduces clutter and delivers 15.4 Watts to each PoE port. A convenient on/off button is located on the back of the switch. Non-PoE devices can connect to the switch—auto-sensing PoE technology cuts power to non-PoE connected devices. Use TRENDnet’s PoE Splitter to install non-PoE devices in remote locations.

Reduces equipment cost by delivering data and power over existing network cables
16 x 10/100Mbps Full Duplex PoE ports
Up to 15.4 W per port with 250 W total power budget
3.2Gbps switching capacity
Use with TRENDnet’s PoE Splitter to network and power non-PoE devices

Feature :

16 x 10/100Mbps Auto-MDIX RJ-45 PoE portsOn/off power switch
IEEE 802.3af Power over Ethernet (PoE) compliant
Supports PoE Powered Device (PD) classification
Provides 15.4 watts per PoE port
3.2Gbps switching fabric
Full wire-speed non-blocking reception and transmission
Store-and-forward switching method
Back pressure Flow Control for half-duplex mode
IEEE 802.3x Flow Control for full-duplex mode
1.5Mbits RAM Data Buffer
4K MAC address entries
Diagnostic LEDs (Power, Link/Activity, PoE Act/Status)
Plug and Play
Sturdy 19” wide metal enclosure
Rack mounting hardware included
3-year limited warranty

Diagram :

Specification :

Hardware

Standard
- IEEE 802.3 10Base-T
- IEEE802.3u 100Base-TX
- IEEE 802.3af Power over Ethernet
- IEEE 802.3x Flow Control
Ports
- 16 x 10/100Mbps Auto-MDIX PoE ports
Power Switch
- On/off power switch
Data Transfer Rate
- Ethernet: 10/20Mbps (half/full duplex)
- Fast Ethernet: 100/200Mbps (half/full duplex)
Data RAM Buffer
- 1.5Mbits
Address Table
- 4K MAC entries
Switch Fabric
- 3.2Gbps
Power
- 100~240VAC 50/60Hz, internal universal switching power
Diagnostic LEDs
- Power, Link/Activity, PoE Act/Status
Power Consumption
- 6 Watts max. (no Powered Device (PD) connected)
- 260 Watts max. (16 PoE devices connected)
Temperature
- Operating: 0° ~ 45°C (32° ~ 113°F)
- Storage: -10° ~ 70°C (14° ~ 158°F)
Humidity
- Max. 95% (non-condensing)
Dimensions
- 440 x 220 x 44 mm (17.3 x 8.7 x 1.7 in.)
Weight
- 3.1 kg (6.9 lbs.)
Certifications
- CE, FCC

PoE

Power over Ethernet
- Up to 15.4 watts per port; PD classification
- Polymer switch for short protection
- PoE: pin 3,6 for power+ and pin 1,2 for power-

TRENDnet TEW-432BRP 54Mbps 802.11g Wireless Firewall Router

Posted on February 23, 2015 by

The 54Mbps Wireless G Router offers a complete wireless solution that allows you to share files, an Internet connection, or network resource while protecting your network using enhanced security features. Simply plug your workstations and your broadband modem into the Wireless G router, and configure your broadband connection using its built-in Web Interface. Use the Virtual Server feature to configure any workstations a Web Server or FTP server easily, allowing users to view files from the Internet. You can also protect your Wireless LAN using 64/128-bit WEP encryption or industry standard WPA-PSK with TKIP or AES algorithms. Increase security by enabling MAC, IP, or Protocol Filtering as well as setting Firewall Rules to limit Internet Access or block malicious intruders from accessing your network.

Proven wireless g performance and reliability
Stream videos, download files and play games
Create a network in minutes with Easy-Go installation
Advanced firewall and wireless encryption ensures data security

Feature :

Wi-Fi Compliant with IEEE 802.11g and 802.11b Devices
Built-in 4 x 10/100Mbps Auto-MDIX LAN Ports
Built-in 1 x 10/100Mbps Auto-MDIX WAN Port (Internet)
Supports Cable/DSL Modems with Dynamic IP, Static IP, PPPoE, PPTP or L2TP Connection Types
DHCP Server Feature Allocates up to 253 Client IP Addresses
Supports 64/128-bit Wired Equivalent Privacy (WEP)
Supports 802.1x WPA/WPA2, WPA-PSK/WPA2-PSK, TKIP/AES for Advance Security
Supports MAC Address, Protocol, IP Filters and UPnP (Universal Plug & Play)
Supports Domain and URL blockings
Traffic Control with Virtual Server, Virtual PC mapping and DMZ
Provides Additional Security with SPI / NAT firewall and Attack Alert via emails
Provides Additional Security of Enable/Disable SSID, Password Protection
Supports Static and Dynamic Routing
Supports IPSec and PPTP VPN Pass-Through Sessions
Flash Memory for Firmware Upgrade, Save/Restore Settings, and Traffic Log
Compliant with Windows 95/98/NT/2000/XP, Linux and Mac OS
Easy Management via Web Browser (HTTP) and Remote Management
Range for Indoor of 30 ~ 50 meters (depends on the environment)
Range for Outdoor of 50 ~ 200 meters (depends on the environment)
3-year limited warranty

Diagram :

Specification :

Hardware

Standards
- Wired: IEEE 802.3 (10Base-T), IEEE 802.3u (100Base-TX),ANSI/IEEE 802.3 Auto Negotiation Wireless: IEEE 802.11b (11Mbps), IEEE 802.11g (54Mbps)
WAN
- 1 x 10/100Mbps Auto-MDIX Port (Internet)
LAN
- 4 x 10/100Mbps Auto-MDIX Port
Connection Type
- Dynamic IP, Static (Fixed) IP, PPPoE, PPTP
Supported Network Protocols
- TCP/IP, NAT, PPPoE/PPTP, HTTP, DHCP Server/Client
LED Indicators
- System, WAN, WLAN, LAN
Dimension (L x W x H)
- 155 x 110 x 30 mm (6 x 4.3 x 1.2 inches)
Weight
- 226g (8 oz.)
Temperature
- Operation: 0°~ 40°C (32°F~ 104°F)Storage:-10°~ 70°C (14°F~ 158°F)
Humidity
- Max. 95% (Non-Condensing)
Power Adapter
- 7.5V DC, 1A External Power Adapter
Certification
- FCC &CE

Wireless

Frequency
- 2.412 ~ 2.484GHz (Industrial Scientific Medical Band)
Module Technique
- 802.11b: CCK (11 and 5.5Mbps), DQPSK (2Mbps),DBPSK (1Mbps)802.11g: OFDM
Antenna
- 1 x 2dBi External Detachable Dipole Antenna (Female Reverse SMA Connector)
Media Access Protocol
- CSMA/CA with ACK
Security
- 64/128-bit WEP (HEX/ASCII), 802.1x WPA/WPA2,WPA-PSK/WPA2-PSK, MAC Address Filter, Protocol Filter
Transmit Power
- 13 dBm (typically)
Data Rate
- 802.11b: 11Mbps, 5.5Mbps, 2Mbps, and 1Mbps802.11g: 54Mbps, 48Mbps, 36Mbps, 24Mbps, 18Mbps, 12Mbps, 9Mbpsand 6Mbps
Receiving Sensitivity
- 11Mbps 8% PER @ -85 dBm (typical)54Mbps 10% PER @ -70 dBm (typical)
Channels
- 11 Channels (US), 13 Channels (EU)

TRENDnet TWG-BRF114 4-Port Gigabit Firewall Router

Posted on February 20, 2015 by

The 4-Port Gigabit Firewall Router (TWG-BRF114) allows multiple users to share Internet access at gigabit speeds while providing a secure configurable firewall environment to protect from unwanted intruders. Setup the TWG-BRF114 in minutes with an intuitive installation wizard and manage your network from any Internet connection with a user friendly Web browser. This user friendly router allows anyone the ability to administer the user access to restrict Internet access based on client IP addresses, URL keywords, and service types. The TWG-BRF114 incorporates advanced NAT and SPI firewall technology to protect against popular denial of service attacks. Remotely access your firewall and enjoy Gigabit speeds knowing your network resources are protected.

Enjoy Gigabit networking speeds
Advanced firewall protection with NAT and SPI
Secure remote management
Intuitive Web browser management interface

Feature :

4-port Gigabit Auto-Sensing switch automatically determines Ethernet speed
Set up the router in minutes with Universal Plug and Play (UPnP) support
Hosts up to 253 clients
Intuitive Web browser management
Supports high speed cable modem, xDSL modem (Dynamic/Static IP, PPPoE, PPTP) and fiber to the home (FTTH )
Works with Windows, Unix and Mac operating systems
Stateful Packet Inspection (SPI) firewall protects against Denial of Service attacks
Manage your network with Network Address Translation (NAT), Network Address Port Translation (NAPT) and NAT Traversal Support
Schedule email alerts and manage event logs
Manage Access Control from defined addresses, URLs and content filtering lists
Supports 100 sessions of Virtual Private Network (VPN) pass-through for PPTP, IPSec and L2TP
Protocol support for PPPoE, PPTP client for DSL connection, BigPond cable, SingTel RAS and Network Time Protocol (NTP)
Additional security authentication with Password Authentication Protocol (PAP and Challenge Handshake Authentication Protocol (CHAP) for PPPoE
Flash memory enables firmware upgrades and a save/restore router configuration
Supports DMZ, Multi-DMZ and 40 virtual servers (port forwarding)
Quality of Service (QoS) technology prioritizes bandwidth for select applications such as Voice of IP and streaming video.
Supports Static Routing, RIP 1 RIP 2 and Dynamic DNS service
3-year limited warranty

Diagram :

Specification :

Hardware

Standards
- IEEE 802.3, 802.3u and 802.3ab
Protocols
- NAT, PPPoE, HTTP, DHCP, TCP/IP, UDP, PAP, CHAP, RIP1 and DDNS
Firewall
- NAT, Stateful Packet Inspection, Attack Alert Email and Log and Denial of Service
Security
- Access Control
Local port
- 4 x RJ45 10/100/1000Mbps Gigabit Ethernet Auto-MDI/MIDX
Internet port
- 1 x Shielded RJ45 10/100/1000Mbps Gigabit Ethernet Auto-MDI/MIDX
Reset Button
- Resets to Factory Default Settings
LEDs
- Power, Status, Link/Act, 10 ,100 ,1000 LAN and WAN
Power
- DC 12v 800mA External Power Adapter
Dimensions (LxWxH):
- 141 x 100 x 27 mm (5.5x 3.9 x 1.06 inches)
Weight
- 363g (12.8 oz.)
Temperature
- Operating: 0° to 40° C(32° to 104° F)
- Storage: -10° to 70° C (14° to 158° F)
Humidity
- Operating: 0 % ~ 80 % (non-condensing)
- Storage: 0% ~ 95% (non-condensing)
Certifications
CE

TRENDnet TPE-T160 16-Port 30 Watt 10/100Mbps PoE+ Switch

Posted on February 18, 2015 by

TRENDnet’s 16-Port 30 Watt 10/100Mbps PoE+ Switch, model TPE-T160, reduces equipment and installation costs by delivering data and power over existing Ethernet cables. The IEEE 802.3at PoE+ standard supplies up to 30 watts of power per port for devices such as high power wireless access points, PTZ (Pan Tilt Zoom) Network Cameras, and VoIP telephony systems. Auto sensing technology delivers up to 30 watts to 802.3at PoE+, 15 watts to 802.3af PoE, and only data to non-PoE devices. GREENnet technology reduces energy costs by up to 75% when the switch is not in use.

Boost office efficiency and reduce network congestion with a total switching capacity of 3.2Gbps. LED indicators display device status for easy power management and troubleshooting. An internal power supply reduces clutter and a convenient on/off button is located on the back of the switch. Use this switch with TRENDnet PoE Splitters to install non-PoE devices in remote locations.Feature :

IEEE 802.3at and IEEE 802.3af Power over Ethernet (PoE) compliant
Support PoE class 2 (7 watts) , 3 (15.4 watts), and 4 (30 watts)
16 x 10/100Mbps Auto-MDIX PoE+ ports
Provides 30 watts per PoE port
3.2 Gbps switching fabric
On/off power switch
Full wire-speed non-blocking switching
Store-and-forward switching method
Back pressure Flow Control for half-duplex mode
IEEE 802.3x Flow Control for full-duplex mode
1.25Mbits RAM Data Buffer
4K MAC address entries
500 watt Internal Power supply: AC input (90~260V/AC, 50~60Hz)
Plug and Play
Sturdy 1U 19” rack mountable metal enclosure
3-year limited warranty

Diagram :Specification :

Hardware

Standard
- IEEE 802.3 10Base-T
- IEEE 802.3u 100Base-TX
- IEEE 802.3at Power over Ethernet (PoE+)
- IEEE 802.3af Power over Ethernet (PoE)
- IEEE 802.3x Flow Control
Ports
- 16 x 10/100Mbps Auto-MDIX PoE+ ports
Data Transfer Rate
- Ethernet: 10/20Mbps (half/full duplex)
- Fast Ethernet: 100/200Mbps (half/full duplex)
Data RAM Buffer
- 1.25Mbits
Address Table
- 4K MAC entries
Switch Fabric
- 3.2 Gbps
Power
- 90~260V AC 50/60Hz, internal universal switching power
Diagnostic LEDs
- Power, PoE, Link/Activity
Power Consumption
- Min: 10 Watts (standby)
- Max: 500 Watts
- PoE Max: 480 Watts (16 x 30 watts PoE devices connected)
Temperature
- Operating: 0° ~ 40°C (32° ~ 104°F)
- Storage: -20° ~ 90°C (-4° ~ 194°F)
Humidity
- Max. 90% (non-condensing)
Dimensions
- 440 x 220 x 45 mm (17.3 x 8.7 x 1.8 in.)
Weight
- 2.5 kg (5.5 lbs.)
Certifications
- CE, FCC

PoE

Power over Ethernet
- Up to 30 watts per port; PD classification Polymer switch for short protectionPoE: pin 3,6 for power+ and pin 1,2 for power- (mode A)