TRENDnet’s TI-PG541 is a reliable IP30 unmanaged PoE+ DIN-rail switch with hardened components rated for extreme industrial environments. It offers four Gigabit PoE+ ports (Ports 1-4, 802.3at), one Gigabit port, one SFP slot, and a full PoE power budget of 120 Watts. Dual redundant power inputs (power adapter sold separately) with overload current protection support zero downtime requirements. An alarm output can be triggered by a primary and/or redundant power failure.
- 4 x Gigabit PoE+ (802.3at) ports, 1 x Gigabit port, and 1 x Gigabit SFP slot
- 120 W full PoE+ power budget
- 12 Gbps switching capacity
- Hardened IP30 rated metal switch with integrated DIN-Rail mount
- -20 to 60 ºC (-4 to 140 ºF) operating temperature range
- Dual redundant power inputs with overload current protection
- Alarm output triggered by power failure
- Power adapter sold separately
Feature :
 |
Full PoE+ Power Budget Supplies up to 30 Watts of PoE/PoE+ power per port (ports 1-4 802.3at/802.3af) with a 120 Watt PoE power budget |
 |
Network Ports 5 x Gigabit Ethernet ports (port 1-4 PoE/PoE+) and 1 x SFP slot |
 |
Integrated DIN-Rail Mount IP30 rated metal enclosure with integrated DIN-rail mounting hardware |
 |
Switching Capacity 12 Gbps switching capacity |
 |
Redundant Power Dual redundant power inputs with overload current protection (power adapter sold separately: model 48VDC3000) |
 |
Alarm Output Alarm output triggered by power failure of primary and/or redundant power (defined by DIP switch) |
 |
Jumbo Frame Sends larger packets, or Jumbo Frames (up to 10 KB), for increased performance |
 |
Extreme Temperatures Hardened switch is rated for an operating temperature range of -20 to 60 ºC (-4 to 140 ºF) |
 |
Electro Magnetic Compliance Complies with IEC61000-6-2 EMC generic standard immunity for industrial environments |
 |
Shock and Vibration Resistant Rated for shock (IEC 60068-2-27), freefall (IEC 60068-2-32), and vibration (IEC 60068-2-6) |
 |
LED Indicators LED indicators convey power, redundant power, alarm, SFP, and network port status |
 |
Grounding Point Grounding point protects equipment from external electrical surges |
Diagram :
Specification :
- Standards
- IEEE 802.3
- IEEE 802.3u
- IEEE 802.3ab
- IEEE 802.3z
- IEEE 802.3at
- IEEE 802.3af
- IEEE 802.3x
- Device Interface
- 4 x Gigabit PoE+ ports
- 1 x Gigabit port
- 1 x Gigabit SFP slot
- 6-pin terminal block (removable)
- DIP switch
- DC power connector
- LED indicators
- Integrated DIN-Rail mount
- Data Transfer Rate
- Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex)
- Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)
- Gigabit: 2000 Mbps (full duplex)
- SX/LX: 2000 Mbps (full duplex)
- Performance
- Data RAM Buffer: 512 KB
- Switching Fabric: 12 Gbps
- MAC Address Table: 8 K entries
- Jumbo Frame: 10 KB
- Forwarding rate: 8.9 Mpps (64-byte packet size)
- Special Features
- Full PoE+ power to each PoE+ port
- Hardened components rated for extreme temperatures
- Dual redundant power inputs
- Alarm output triggered by power failure
- Auto-Negotiation
- Auto store and forward architecture
- Automatic address learning and address aging
- ESD 8 KV and Surge 6 KV protection
- Power Adapter (48VDC3000, Sold Separately)
- Input: 100 – 240 V AC, 50/60 Hz, 2 A
- Output: 48 V DC, 3.34 A 160 watts max.
- Terminal Block
- Input: PWR (Primary): 48 – 57 V DC
- RPS (Redundant): 48 – 57 V DC
- Power Consumption
- Min.: 10 Watts (standby)
- Max.: 130 Watts
- PoE budget: 120 Watts (Max.)
- PoE
- Up to 15.4 watts/port for PoE
- Up to 30 watts/port for PoE+
- PoE: pin 1, 2 for power + and pin 3, 6 for power – (mode A)
- Housing
- IP30 metal case
- Integrated DIN-rail mount
- Grounding point
- 8 KV ESD protection
- 6 KV Surge protection
- Operating Temperature
- - 20 – 60 °C (- 4 – 140 °F)
- Operating Humidity
- Max. 95 % non-condensing
- Dimensions
- 135 x 100 x 30 mm (5.3 x 3.9 x 1.2 in.)
- Weight
- 500 g (1.2 lbs.)
- Certifications
- CE
- FCC
- Shock (IEC 60068-2-27)
- Freefall (IEC 60068-2-32)
- Vibration (IEC 60068-2-6)
- Warranty
- 3 year limited
