IES-1080/1062 series are unmanaged Ethernet switches with 6×10/100Base-T(X) and 2x100Base-FX, 10/100/1000Base-T(X), 1000Base-SX or 1000Base- LX ports. IES-1080/1062 series support redundant power input, relay output alarm, and surge protection. The wide operating temperature range from -40°C to 70°C can satisfy most of operating environments.

Feature :

• IES-1080 provide 8×10/100Base-T(X) ports
• IES-1062GT provide 6×10/100Base-T(X) and 2×10/100/1000Base-T(X) ports
• IES-1062FX series provide 6×10/100Base-T(X) and 2x100Base-FX fiber ports
• IES-1062GF series provide 6×10/100Base-T(X) and 2x1000Base-X fiber ports
• Triple redundant DC power inputs of terminal block and power jack
• Support auto-negotiation and auto-MDI/MDI-X
• Support store and forw ard transmission
• Support flow control
• Warning system by relay output
• Rigid IP-30 housing design
• DIN-Rail and wall mounting enabled

Specification :

IGCS-E140 is an PCI-Express unmanaged Gigabit Ethernet switch card. The Ethernet switch card is a high performance LAN controller. IGCS-E140 provided 4×10/100/1000Base-T(X) auto MDI/MDIX Ethernet ports. IGCS-E140 could be installed on any IPC motherboard with PCIe socket to make the IPC/embedded system able to communication with other Ethernet devices. The IGCS-E140’s full bandwidth capability boasts a robust 1000Mbps capability through the PCI-Express bus architecture. IGCS-E140 no need to purchase a new switch or broadband router because the auto-negotiation feature works with your existing switch, broadband router, or hub to provide the highest network speed available. The automatic full duplex capability further increases bandwidth and eliminates packet collisions by allowing data to flow in both directions at the same time. Therefore, IGCS-E140 is the best solution to IPC/embedded system to feature Ethernet network.

Feature :

• Provide 4×10/100/1000Base-T(X) Ethernet ports
• Supports PCIe x1 bus and compatible x4, x8 and x16 PCIe slots
• Compliant with PCIe Rev.1.1 Interface
• Supports 10K Bytes Jumbo Frame
• Support auto-negotiation and auto-MDI/MDI-X
• Support store and forward transmission
• Support flow control

Specification :

IGPCS-E131GP is a PCI-Express unmanaged Gigabit PoE Ethernet switch card with P.S.E. function, IGPCS-E131GP supports 3×10/100/1000Base-T(X) IEEE 802.3at P.S.E. (Power Sourcing Equipment) and 1×100/1000Base-X SFP ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE port. IGPCS-E131GP could be installed on any IPC motherboard with PCIe socket to make the IPC/embedded system able to communication with other Ethernet devices. Therefore, IGPCS-E131GP is the best solution to IPC/embedded system to feature Ethernet network.

Feature :

• Provide 3×10/100/1000Base-T(X) PoE (P.S.E.) ports
• Supports IEEE 802.3at compliant PoE and total power budget is 65Watts with maximum 30Watts per port
• PoE power sourced from 12VDC of ATX power
• Each LAN port supports both PoE and Non-PoE connections (Auto Detect & Classification)
• Supports PCIe x1 bus and compatible x4, x8 and x16 PCIe slots
• Compliant with PCIe Rev.1.1 Interface
• Supports 100Base-FX or 1000Base-X SFP port by DIP-switch
• Supports 10K Bytes Jumbo Frame
• Support auto-negotiation and auto-MDI/MDI-X
• Support store and forward transmission
• Support flow control

Specification :

IGS-9042GP is managed redundant ring Ethernet switches with 4×10/100/1000Base-T(X) ports and 2×100/1000Base-X SFP ports.  The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology.  And support wide operating temperature from -40 ^oC to 75 ^oC.  IGS-9042GP can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration.  Therefore, these switches is one of the most reliable choice for highly-managed and Fiber Ethernet application.

Feature :

• Support O-Ring(recovery time < 30ms over 250 units of connection) andMSTP(RSTP/STP compatible) for Ethernet Redundancy
• Ø Open-Ringsupport the other vendor’s ring technology in open architectur
• O-Chain allow multiple redundant network rings
• *noteSupport standard IEC 62439-2 MRP(Media Redundancy Protocol) function
• Supports IEEE 1588v2 clock synchronization
• Supports IPV6 new internet protocol version
• Supports Modbus TCP protocol
• Supports IEEE 802.3az Energy-Efficient Ethernet technology
• Provided HTTPS/SSH protocol to enhance network security
• Supports SMTP client and NTP client
• Supports IP-based bandwidth management
• Supports application-based QoS management
• Supports Device Binding security function
• Supports DOS/DDOS auto prevention
• IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
• Supports SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
• Supports ACL, TACACS+ and 802.1x User Authentication for security
• Supports 9.6K Bytes Jumbo Frame
• Multiple notification for warning of unexpected event
• Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration
• Support DBU-01data backup unit device for quickly backup/restore configuration
• Supports LLDP Protocol
• Rigid IP-30 housing design
• DIN-Rail and wall mounting enabled

*NOTE: This function is available by request only

Specification :

IES-1050 is unmanaged Ethernet switch with 5×10/100Base-T(X) ports. With very compact size of housing, you can install IES-1050 easily. In addition, IES-1050 is with rigid IP-30 housing design and can operate under harsh environment. and can satisfy most requirement of operation.

Feature :

• Supports 5 ports 10/100Base-T(X)
• Rigid IP-30 housing design
• DIN-Rail and panel mounting enabled

Specification :