ATEN CE610 USB 2.0 DVI KVM Extender

Posted on January 28, 2014 by

The CE610 USB 2.0 DVI KVM Extender is a DVI and USB Extender that supports USB 2.0, HDBaseT technology, USB touch panels, and file transfer functionality.

With HDBaseT support, the CE610 USB 2.0 DVI KVM Extender uses only one Cat 5e cable to extend DVI and USB signals up to 100 m. The CE610 is equipped with USB connectors which allow you to extend any USB device between the units. The USB functionality provides not only peripheral sharing but also provides support for touch panel control and fi le transfer. The CE610 is ideal for situations where touch panel is required, such as transportation centers, medical facilities, shopping malls,and when synchronizing for fi les/ folders between portable and desktop computers are required.

Feature :

Uses single Cat 5e cable to connect the local and remote units
Allow access to a computer or KVM installation from a remote console
Superior Video Quality – up to 1920 x 1200 @ 60 Hz at 100 m
Supports HDBaseT connectivity technology
Transparent USB Support – supports all USB 2.0 High Speed device*
Extends local PC Video/Keyboard/Mouse to Remote side
Built-in 8KV/15KV ESD protection (Contact voltage 8KV; Air voltage 15KV)
USB 2.0 Support*: supports devices such as keyboard, mouse, fl ash drive, printer, microphone, speakers, USB web cameraand other USB 1.1 devices which require moderate amounts of bandwidth* Note: The CE610 supports USB transfer rates of up to 30 Mbps.

Diagram :

Specification :

Function		CE610L	CE610R
Connectors	DVI In	1 x DVI-D Female (White)	N/A
	DVI Out	N/A	1 x DVI-D Female (White)
	USB	1 x USB Type B Female (White)	3 x USB Type A Female (White)
	Power	1 x DC Jack
	F/W Upgrade	1 x RJ-11 Female (Black)
	Unit to Unit	1 x RJ-45 Female (Black)
LEDs	Power	1 (Green)
	Link	1 (Green)
	USB	1 (Green)
	Video	1 (Green)
Emulation	Keyboard / Mouse	USB
Video		1920 x 1200 @ 60Hz (100 m)
Power Consumption		DC 5V, 15 W
Environment	Operating Temp.	0–50°C
	Storage Temp.	-20–60°C
	Humidity	0–80% RH, Non-condensing
Physical Properties	Housing	Metal
	Weight	605g	615g
	Dimensions (L x W x H)	18.20 x 11.79 x 2.28 cm

The specification and pictures are subject to change without notice.
All trademarks and logos are the properties of their respective holders.

ATEN CE604 DVI Dual View KVM Extender

Posted on January 28, 2014 by

The CE604 is a DVI Dual View USB based KVM Extender that features Dual View functionality, which enables the video output to seamlessly display on two monitors. With RS-232 serial functionality, it allows access to a computer system from a remote console up to 60 m away. The CE604 is built for control and security purposes, and is targeted towards financial and industrial markets.

The CE604 is equipped with an RS-232 serial channel that connects to a serial terminal or to serial devices, such as touch screens and barcode scanners. In addition, it supports an advanced PC Wake Up feature, which allows you to simply press a pushbutton from the remote dual view console to wake a PC at the local site. The CE604 eliminates the need for traveling back and forth between the local computer and remote console, making it an effi cient and flexible solution.
The CE604 is ideal for applications that require the console to be in a conveniently accessible location, while the system equipment needs to reside in a safe place – away from dust, dirt and harsh environmental influences. It also provides a cost-effective way of keeping sensitive data, such as financial and personal information, safe in a heavily
secured data center, while still allowing remote access to users.

Feature :

Local and Remote Units connect at distances up to 60 m using two Cat 5e cables
Transmit speaker, keyboard, mouse, DDC and one DVI via one Cat5 cable; RS-232, microphone and another DVI by adding a second Cat 5e cable
Supports Dual View video source transmission (one PC with two video output ports)
Audio Enabled – supports stereo speakers and microphone
Supports Real DDC bypass and ATEN default EDID technology – set up various confi gurations via hotkeys
Supports PC wakeup function via one pushbutton or hotkey
RS-232 serial channel – connect to a serial terminal, or serial devices such as touchscreens and barcode scanners (Baud Rate up to 9600 bps)
Compatible with other ATEN Dual View KVM devices, such as CS1642A/ CS1644A and CS1762A/CS1764A
Superior video quality – up to 1920 x 1200 @ 60 Hz at 30 m; 1024 x 768 @ 60 Hz at 60 m
Manual compensation control to adjust video signal quality in order to compensate for distance
Built-in 8KV/15KV ESD protection (Contact voltage 8KV; Air voltage 15KV) and 2KV surge protection

Diagram :

Specification :

Function			CE604L	CE604R
Connectors	KVM Ports	USB	1 x USB Type B Female (White)	N/A
		Speakers	1 x Mini Stereo Jack Female (Green)	N/A
		Mic.	1 x Mini Stereo Jack Female (Pink)	N/A
		Video input	2 x DVI-D Female (White)	N/A
	Console Ports	Video	N/A	2 x DVI-D Female (White)
		Speakers	N/A	1 x Mini Stereo Jack Female (Green)
		Mic.	N/A	1 x Mini Stereo Jack Female (Pink)
		Keyboard	N/A	1 x USB Type A Female (White)
		Mouse	N/A	1 x USB Type A Female (White)
	RS-232		1 x DB-9 Female (Black)	1 x DB-9 Male (Black)
	Power		1 x DC Jack (Black)
	Sub / Main		2 x RJ-45 Female (Black)
LEDs	Link		1 (Green)	1 (Green)
	Power		1 (Green)	1 (Green)
Switches	Compensation switch		N/A	2 x 8-position switch
	F/W Upgrade		1 x Slide Switch	N/A
Buttons	Wakeup button		N/A	1 x pushbutton
Video			1920×1200 @ 60Hz (30 m); 1024×768 @ 60Hz (60 m)
Power Consumption			DC5.3V, 3.4W	D5.3V, 4.3W
Environment	Operating Temp.		0–50°C
	Storage Temp.		-20–60°C
	Humidity		0–80% RH, Non-condensing
Physical Properties	Housing		Metal
	Weight		0.48 kg
	Dimensions (L x W x H)		20.20 x 8.54 x 2.50 cm	20.20 x 8.70 x 2.50 cm

The specification and pictures are subject to change without notice.
All trademarks and logos are the properties of their respective holders.

ATEN CE602 DVI Dual Link KVM Extender

Posted on January 22, 2014 by

The CE602 is a DVI Dual Link and USB based KVM Extender with RS-232 serial functionality. It allows access to a computer system from a remote console (USB keyboard, monitor, and mouse). Because it allows access to a computer system from a remote console, the CE602 is perfect for use in any type of installation where you need to place the console where it is conveniently accessible, but you want the system equipment to reside in a safe location – away from the dust and dirt of the factory floor, or the harsh environmental influence of a construction site, for example. This allows users to deploy system equipment over large distances.

The CE602 can support up to 2560 x 1600 (DVI Dual Link) resolution. It uses two Cat 5e cables for HDCP, RS-232, microphone and dual link signals. You can also use just one Cat 5e cable if using single link connections.

Feature :

Local and Remote Units connect at distances up to 60 m using Cat 5e cable
Allows access to a computer or KVM installation from a remote console (up to 60 m)
Supports DVI-D interface and allows transmission of DVI duallink signals
Features ATEN technology that allows A/V transmission over one cat 5e cable
The 2nd Cat 5e cable is used for HDCP, RS-232, microphone and dual link signals
Manual compensation control to adjust signal strength in order to compensate for distance
RS-232 serial ports – connect to a serial terminal, or serial devices such as touchscreens and barcode scanners (Baud Rate 115200 bps)
Audio Enabled – supports stereo speakers and microphone
Built-in 8KV/15KV ESD protection (Contact voltage 8KV; Air voltage 15KV)
Supports Wide Screen formats
Superior video quality of up to 2560 x 1600 @ 60 Hz (DVI Dual Link) at 40 m; 1920 x 1200 @ 60 Hz at 30 m; 1024 x 768 @ 60 Hz at 60 m – get an excellent, crisp image on your screen over long distance transmissions
Hot pluggable
Rack mountable
Easy to install – no software required – connecting cables to the devices is all it takes
Firmware upgrade

Diagram :

Specification :

Function			CE602L	CE602R
Connectors	Console Ports	Keyboard	N/A	1 x USB Type A Female (White)
		Video	N/A	1 x DVI-D Female (White)
		Mouse	N/A	1 x USB Type A Female (White)
		Speakers	N/A	1 x Mini Stereo Jack Female (Green)
		Mic.	N/A	1 x Mini Stereo Jack Female (Pink)
	KVM Ports	Video	1 x DVI-D Female (White)	N/A
		Speakers	1 x Mini Stereo Jack Female (Green)	N/A
		Mic.	1 x Mini Stereo Jack Female (Pink)	N/A
		USB	1 x USB Type B Female (White)	N/A
	RS-232		1 x DB-9 Female (Black)	1 x DB-9 Male (Black)
	Power		1 x DC Jack
	Sub/Main		2 x RJ-45 Female (Black)
LEDs	Link		1 (Green)
	Power		1 (Green)
Switches	EQ Switch		N/A	1 x 8-position switch
	Firmware Upgrade		1 x Slide Switch	N/A
Emulation	Keyboard/Mouse		USB
Video			2560 x 1600 @ 60Hz (40 m) 1920 x 1200 @ 60Hz (30 m); 1024 x 768 @ 60Hz (60 m);
Power Consumption			DC 5.3V/3.18 W	DC5.3V, 5.04 W
Environment	Operating Temp.		0–50°C
	Storage Temp.		-20–60°C
	Humidity		0–80% RH, Non-condensing
Physical Properties	Housing		Metal
	Weight		0.48 kg
	Dimensions (L x W x H)		20.20 x 8.54 x 2.50 cm	20.20 x 8.70 x 2.50 cm

The specification and pictures are subject to change without notice.
All trademarks and logos are the properties of their respective holders.

ATEN CE600 DVI KVM Extender

Posted on January 22, 2014 by

The CE600 is a DVI and USB based KVM Extender with RS-232 serial functionality. It allows access to a computer system from a remote console (USB keyboard, monitor, and mouse). Because it allows access to a computer system from a remote console, the CE600 is perfect for use in any type of installation where you need to place the console where it is conveniently accessible, but you want the system equipment to reside in a safe location – away from the dust and dirt of the factory floor, or the harsh environmental infl uence of a construction site, for example. This allows users to deploy system equipment over large distances.

The CE600 users one Cat 5e cable (DVI Single Link) to support up to 1920 x 1080 video resolution *
* The 2nd Cat 5e cable is used for HDCP, RS-232, and microphone signals.

Feature :

Local and Remote Units connect at distances up to 60 m using Cat 5e cable
Allows access to a computer or KVM installation from a remote console (up to 60 m)
Features ATEN technology that allows A/V transmission over one cat 5e cable
The 2nd Cat 5e cable is used for HDCP, RS-232, and microphone signals
Manual compensation control to adjust signal strength in order to compensate for distance
RS-232 serial ports – connect to a serial terminal, or serial devices such as touchscreens and barcode scanners (Baud Rate 115200 bps)
Audio Enabled – supports stereo speakers and microphone
Built-in 8KV/15KV ESD protection (Contact voltage 8KV; Air voltage 15KV)
Supports Wide Screen formats
Superior video quality of up to 1920 x 1200 @ 60 Hz at 30 m; 1024 x 768 @ 60 Hz at 60 m – get an excellent, crisp image on your screen over long distance transmissions
Hot pluggable
Rack mountable
Easy to install – no software required – connecting cables to the devices is all it takes
Firmware upgrade

Diagram :

Specification :

Function			CE600L	CE600R
Connectors	Console Ports	Keyboard	N/A	1 x USB Type A Female (White)
		Video	N/A	1 x DVI-D Female (White)
		Mouse	N/A	1 x USB Type A Female (White)
		Speakers	N/A	1 x Mini Stereo Jack Female (Green)
		Mic.	N/A	1 x Mini Stereo Jack Female (Pink)
	KVM Ports	Video	1 x DVI-D Female (White)	N/A
		Speakers	1 x Mini Stereo Jack Female (Green)	N/A
		Mic.	1 x Mini Stereo Jack Female (Pink)	N/A
		USB	1 x USB Type B Female (White)	N/A
	RS-232		1 x DB-9 Female (Black)	1 x DB-9 Male (Black)
	Power		1 x DC Jack
	Sub/Main		2 x RJ-45 Female (Black)
LEDs	Link		1 (Green)
	Power		1 (Green)
Switches	EQ Switch		N/A	1 x 8-position switch
	Firmware Upgrade		1 x Slide Switch	N/A
Emulation	Keyboard/Mouse		USB
Video			1920 x 1200 @ 60Hz (30 m); 1024 x 768 @ 60Hz (60 m);
Power Consumption			DC5.3V/2.65 W	DC5.3V, 4.24 W
Environment	Operating Temp.		0–50°C
	Storage Temp.		-20–60°C
	Humidity		0–80% RH, Non-condensing
Physical Properties	Housing		Metal
	Weight		0.48 kg
	Dimensions (L x W x H)		20.20 x 8.54 x 2.50 cm	20.20 x 8.70 x 2.50 cm

* The specification and pictures are subject to change without notice.
* All trademarks and logos are the properties of their respective holders.

ATEN CV131B Sun Console Converter

Posted on January 22, 2014 by

CV131B is a signal converter specifically designed for SUN systems. They can be used with KVM switches. Both models are easy to install and can be configured via the hotkeys on the keyboard.

Feature :

Compatible with Sun USB systems
Compatible with ATEN or ALTUSEN SPHD* or PS/2 equipped KVM switches
Translates PS/2 keyboard, mouse, and VGA signals to Sun USB keyboard, mouse and monitor signals
High quality molded connectors
Keyboard language selection via simple hotkeys
Composite sync video support
Supports PS/2 mice and Microsoft Intellimouse
External power adapter not required
Supports 1600 x 1200, maximum video resolutions including Sun specific: 1152 x 900*Compatible with SPHD PS/2 and Combo products only.

Diagram :

Specification :

Function			CV-131B
Console Connection			1
Connectors	To Sun	Keyboard/ Mouse	1 x USB Type A Male (Black)
		Video	1 x HDB-15 Male (Blue)
	To Switch	Keyboard	1 x 6-pin Mini-DIN Male (Purple)
		Video	1 x HDB-15 Female (Blue)
		Mouse	1 x 6-pin Mini-DIN Male (Green)
LEDs	Power		1 (Orange)
Emulation	Keyboard / Mouse		Sun
Video			1600 x 1200
Environment	Operating Temp.		0 ~50°C
	Storage Temp.		-20 ~60°C
	Humidity		0~80% RH, Non-condensing
Physical Properties	Housing		Plastic
	Weight		0.24kg
	Cable Length		1.8 m
	Dimensions (L x W x H)		10.65 x 4.20 x 2.31 cm

The specification and pictures are subject to change without notice.
All trademarks and logos are the properties of their respective holders.