The TFC-1000S70 Intelligent Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Single Mode SC-Type fiber converter that supports SNMP and spans distances up to 70km (43.5miles). Ports include 1 x 1000Base-T (RJ-45) port and 1 x 1000Base-LX (SC-Type) port.

• 1 x 1000Base-T RJ-45 port
• 1 x 1000Base-LX single-mode SC type fiber port
• Provides Dip switch to set: Fiber (Forced/Auto-Negotiation), LLR (Enable/Disable)
• Support LLCF (Link Loss Carry Forward, Link Pass Through)
• Support LLR (link Loss Return) for Fiber port
• Monitor and configure Ethernet or Fiber’s duplex mode, LLR, port on/off and receive link down information via management module TFC-1600MM and chassis TFC-1600
• Status LED indicators for Power and Link/Activity
• Wall mountable
• Optional 19” system chassis with redundant power supply (TFC-1600), holds up to 16 TFC series Media Converters
• 3-year limited warranty
• Compliant with IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX standards
• SC-type single-mode fiber port connects over distances of up to 70km (43.5 miles)
• 1000Base-T Gigabit copper port supports Full-Duplex mode
• Supports port level SNMP management
• Functions as a stand alone converter or with the TFC-1600 fiber chassis

Specification :

Hardware

Standard

• IEEE802.3ab 1000Base-T, IEEE 802.3z 1000Base-LX

Supported Frame Size

• Standard Ethernet up to 10Kbytes

Network Media

• 1000Base-TX: Cat. 6 EIA/TIA-568 100-ohm UPT/STP, up to 100m
• 1000Base-SX: Single-mode fiber optic cable 9/125 µm or 10/125 µm, up to 70km

Protocol

• CSMA/CD

Ports

• 1 x 1000Base-T
• 1 x 1000Base-LX (SC-type)

Dip Switch

• Fiber (forced/auto-negotation), LLR (enable/disable)

Transfer Rate

• 2000Mbps (full-duplex)

Diagnostic LEDs

• Per Unit: power
• Per Port: link/activity

Power Adapter

• 7.5V DC, 1A external power adapter

Power Consumption

• 2.7 Watts (max)

Dimensions

• 120 x 88 x 25mm (4.7 x 3.46 x 0.98 in.)

Weight

• 354g (12.5oz)

Temperature

• Operating: 0° ~ 40° C (32° ~ 104° F)
• Storage: -25° ~ 70° C (-13° ~ 158° F)

Humidity

• Max. 90% (non-condensing)

Certifications

• CE, FCC

Media

• SMF

Wavelength

• 1550 nm

Pout (Dbm)

• 0 ~ 5

Sensitivity

• -24 ~ -3

Power

• 24

Distance

• 70 m

Ensure zero downtime with this hot swappable 100 ~ 240 VAC redundant power supply. Built-in over voltage and short circuit protection protects networking hardware. Use this device with the TFC-1600 chassis as a power supply backup.

• 1-year limited warranty
• Ensure zero downtime

TRENDnet’s hot-pluggable TEG-10GBS10, 10GBASE-LR SFP+ Single Mode LC Module, works with a MSA compliant SFP+ slot. This Single Mode transceiver spans distances up to 10 km (6.2 miles), comes with a LC duplex connector, and supports up to 10.5 Gbps networking throughput speeds. Digital Diagnostics Monitoring (DDM) captures critical device parameters such as transmit/receive power, temperature, and voltage.

• Hot-pluggable SFP+ transceiver
• SFP+ MSA compliant
• Supported throughput: up to 10.5 Gbps
• Single Mode fiber for distances up to 10 km (6.2 miles)
• 1310 nm wavelength
• Duplex LC connector
• Digital Diagnostics Monitoring (DDM) support
• Operating temperature: 0 to 70 °C (32 to 158 °F)
• Single 3.3 V power supply

Feature :

	Hot-Pluggable SFP+ Hot-pluggable SFP+ transceiver works with a MSA compliant SFP+ slot
	Fiber Wavelength Compatible with Single Mode 1310 nm transmissions
	Fiber Distance Supports networking for distances up to 10 km (6.2 miles)
	Fiber Port LC-type duplex connector
	DDM Support Digital Diagnostics Monitoring (DDM) captures critical device parameters such as transmit/receive power, temperature, and voltage
	Power Supply Single 3.3 volt power supply
	Operating Temperature Rated for an operating temperature range of 0 to 70 °C (32 to 158 °F)
	Standards Compliant with SFF-8431, SFF-8432, SFF-8472, 10G FC Rev 4.0, FC-PI-4 Rev 7.0, and IEEE802.3ae 10GBASE-LR/LW

 

Specification :

Standards

• IEEE 802.3ae
• 10GBASE-SR

Device Interface

• SFP + MSA Compliant
• LC duplex connector

Data Transfer Rate

• 8.5-10 Gbps

Wavelength

• 1310 nm

Optical Output Power

• 0.5 ~ -8.2 dBm

Distance

• 10 km

Special Features

• Hot pluggable
• Metal enclosure
• DDM support

Sensitivity

• -12.6 dBm

Power

• Consumption: 522 mW

Operating Temperature

• 0 – 70 °C (32 – 158 °F)

Operating Humidity

• Max. 95% non-condensing

Dimensions

• 14.8 x 56.5 x 11.85 mm (0.6 x 2.2 x 0.5 in.)

Weight

• 22 g (0.7 oz.)

Certifications

• CE
• FCC

Warranty

• 3 year limited

TRENDnet’s hot-pluggable TEG-10GBSR, 10GBASE-SR SFP+ Multi Mode LC Module, works with a MSA compliant SFP+ slot. This Multi Mode transceiver spans distances up to 550 meters (1,804 feet), comes with a LC duplex connector, and supports up to 10.5 Gbps networking throughput speeds. Digital Diagnostics Monitoring (DDM) captures critical device parameters such as transmit/receive power, temperature, and voltage.

• Hot-pluggable SFP+ transceiver
• SFP+ MSA compliant
• Supported throughput up to 10.5 Gbps
• Multi Mode fiber for distances up to 550 m (1,804 feet)
• 850 nm wavelength
• Duplex LC connector
• Digital Diagnostics Monitoring (DDM) support
• Operating temperature: 0 to 70 °C (32 to 158 °F)
• Single 3.3 V power supply

Feature :

	Hot-Pluggable SFP+ Hot-pluggable SFP+ transceiver works with a MSA compliant SFP+ slot
	Fiber Wavelength Compatible with Multi Mode 850 nm transmissions
	Fiber Distance Supports networking for distances up to 550 meters (1,804 feet)
	Fiber Port LC-type duplex connector
	DDM Support Digital Diagnostics Monitoring (DDM) captures critical device parameters such as transmit/receive power, temperature, and voltage
	Power Supply Single 3.3 volt power supply
	Operating Temperature Rated for an operating temperature range of 0 to 70 °C (32 to 158 °F)
	Standards Compliant with SFF-8431, SFF-8432, SFF-8472, FC-PI-4,10G FC, and IEEE802.3ae 10GBASE-SR

 

Specification :

Standards

• IEEE 802.3ae
• 10GBASE-SR

Device Interface

• SFP+ MSA Compliant
• LC duplex connector

Data Transfer Rate

• 8.5-10.5 Gbps

Wavelength

• 850 nm

Optical Output Power

• -1 ~ -7.5 dBm

Distance

• 550 m (OM4)
• 300 m (OM3)
• 82 m (OM2)
• 33 m (OM1)

Special Features

• Hot pluggable
• Metal enclosure
• DDM support
• Sensitivity
• -14 dBm

Power

• Consumption: 439 mW

Operating Temperature

• 0 – 70 °C (32 – 158 °F)

Operating Humidity

• Max. 95% non-condensing

Dimensions

• 14.8 x 56.5 x 11.85 mm (0.6 x 2.2 x 0.5 in.)

Weight

• 22 g (0.7 oz.)

Certifications

• CE
• FCC

Warranty

• 3 year limited