TRENDnet TPE-S160 16-Port 10/100Mbps PoE Switch

Posted on by

TPE-S160-1The 16-Port 10/100Mbps PoE Switch, model TPE-S160, reduces equipment and installation costs by delivering data and power over existing Ethernet cables to Power over Ethernet (PoE) enabled devices such as Access Points and IP Cameras. Boost office efficiency and reduce network congestion with a total switching capacity of 3.2Gbps. LED indicators display device status for easy power management and troubleshooting. An internal power supply reduces clutter and delivers 15.4 Watts to each PoE port. A convenient on/off button is located on the back of the switch. Non-PoE devices can connect to the switch—auto-sensing PoE technology cuts power to non-PoE connected devices. Use TRENDnet’s PoE Splitter to install non-PoE devices in remote locations.

  • Reduces equipment cost by delivering data and power over existing network cables
  • 16 x 10/100Mbps Full Duplex PoE ports
  • Up to 15.4 W per port with 250 W total power budget
  • 3.2Gbps switching capacity
  • Use with TRENDnet’s PoE Splitter to network and power non-PoE devices

TPE-S160-2Feature :

  • 16 x 10/100Mbps Auto-MDIX RJ-45 PoE portsOn/off power switch
  • IEEE 802.3af Power over Ethernet (PoE) compliant
  • Supports PoE Powered Device (PD) classification
  • Provides 15.4 watts per PoE port
  • 3.2Gbps switching fabric
  • Full wire-speed non-blocking reception and transmission
  • Store-and-forward switching method
  • Back pressure Flow Control for half-duplex mode
  • IEEE 802.3x Flow Control for full-duplex mode
  • 1.5Mbits RAM Data Buffer
  • 4K MAC address entries
  • Diagnostic LEDs (Power, Link/Activity, PoE Act/Status)
  • Plug and Play
  • Sturdy 19” wide metal enclosure
  • Rack mounting hardware included
  • 3-year limited warranty

Diagram :

Diagram TPE-S160Specification :

Hardware

  • Standard
    • IEEE 802.3 10Base-T
    • IEEE802.3u 100Base-TX
    • IEEE 802.3af Power over Ethernet
    • IEEE 802.3x Flow Control
  • Ports
    • 16 x 10/100Mbps Auto-MDIX PoE ports
  • Power Switch
    • On/off power switch
  • Data Transfer Rate
    • Ethernet: 10/20Mbps (half/full duplex)
    • Fast Ethernet: 100/200Mbps (half/full duplex)
  • Data RAM Buffer
    • 1.5Mbits
  • Address Table
    • 4K MAC entries
  • Switch Fabric
    • 3.2Gbps
  • Power
    • 100~240VAC 50/60Hz, internal universal switching power
  • Diagnostic LEDs
    • Power, Link/Activity, PoE Act/Status
  • Power Consumption
    • 6 Watts max. (no Powered Device (PD) connected)
    • 260 Watts max. (16 PoE devices connected)
  • Temperature
    • Operating: 0° ~ 45°C (32° ~ 113°F)
    • Storage: -10° ~ 70°C (14° ~ 158°F)
  • Humidity
    • Max. 95% (non-condensing)
  • Dimensions
    • 440 x 220 x 44 mm (17.3 x 8.7 x 1.7 in.)
  • Weight
    • 3.1 kg (6.9 lbs.)
  • Certifications
    • CE, FCC

PoE

  • Power over Ethernet
    • Up to 15.4 watts per port; PD classification
    • Polymer switch for short protection
    • PoE: pin 3,6 for power+ and pin 1,2 for power-

Related Posts