GPRS Micro RTU Controller with 8 DIs, 4 DIOs, and 8 DOs
The ioLogik W5312 series GPRS micro RTU controllers are rugged, compact solutions for remote monitoring and alarm systems. With the ioLogik W5312 series, you can define a GPRS connection strategy, including Always-On and Wake-On-Demand, to optimize data transmission rates for different applications. In addition, the operational cost of GPRS communication depends on the data transmission rate. With Moxa’s active technology, you can expect to cut transmission costs in half and offer different GPRS connection strategies to achieve better data transmission fees.
Automatic Data Updates from SD Cards Following Network Failures
When Active OPC Server™ and DA-Center™ are used together, upon network reconnection Moxa’s ioLogik W5300 series of RTU controllers are able to transmit data logs collected offline. After each network connection, the DA-Center database gateway will compare historical data stored on the ioLogik W5300’s local SD card with its received, real-time data, and then supplement any missing data by requesting re-transmission from the RTU.
Dynamic IP Assignments
For most cellular solutions, each remote modem as well as the central SCADA server is assigned static public IP when establishing bi-directional communication. Yet cellular network carriers charge higher monthly fees for static, public IPs than dynamic, private ones. Moxa’s ioLogik W5300 series and patented Active OPC Server allow users to implement dynamic IP assignments for the RTUs. The ioLogik W5300 can automatically establish communications with the Active OPC Server using a fixed IP, and the Active OPC Server™ will receive and register the ioLogik W5300’s IP address and receive or record tag updates accordingly.
I/O Expandability
The ioLogik W5300 can integrate external wired clients via daisychained ioLogik E1200 I/O modules. ioLogik E1200 modules support simple daisy chaining and cost-free peer-to-peer I/O extensions. Through the RJ45 Ethernet port, the ioLogik W5300 can support up to three connected ioLogik E1200 series I/O modules to enforce a flexible and scalable network expansion that best fits customers’ needs.
This rugged, compact solution is suitable for the following applications.
- Water and wastewater industries
- Broadcast and telecom radio tower monitoring
- Infrastructure management
- Oil & gas, power, and transportation
- Lighting control monitoring
Feature :
The Green Core Product Identity of the ioLogik series will be phased in starting May 1, 2014. During the product transition period, you may still receive products that use the previous panel design. Please click here to learn more about Moxa’s Green Core product transition.
Features and Benefits 
- Integrated, compact box solution for GPRS telemetry applications
- Definable GPRS connective strategy to optimize data transmission
- Intuitive menu driven front-end intelligence
- Flexible, Unicode alarm system supporting SMS, email, SNMP Trap, TCP/UDP
- One RS-232/422/485 serial port built-in to connect with field serial devices
- Backup and sustainable data logging function
- Seamless SCADA connectivity by Active OPC technology
- Configure, update firmware, and program over the air via ioAdmin
- Windows/WinCE VB/VC.NET and Linux C APIs
Diagram :
Specification :
| • Inputs and Outputs | |
| Digital Inputs | 8 channels |
| Digital Outputs | 8 channels |
| Configurable DI/Os | 4 channels |
| Isolation | 3k VDC or 2k Vrms |
| • Digital Input | |
| Sensor Type | Wet Contact (NPN or PNP) and Dry Contact |
| I/O Mode | DI or Event Counter |
| Dry Contact | • On: short to GND • Off: open |
| Wet Contact (DI to GND) | • On: 0 to 3 VDC • Off: 10 to 30 VDC |
| Common Type | 6 points per COM |
| Counter Frequency | 900 Hz |
| Digital Filtering Time Interval | Software Configurable |
| • Digital Output | |
| Type | Sink |
| I/O Mode | DO or Pulse Output |
| Pulse Output Frequency | 1 kHz |
| Over-voltage Protection | 45 VDC |
| Over-current Protection | 2.6 A (4 channels @ 650 mA) |
| Over-temperature Shutdown | 160°C (min.) |
| Current Rating | 200 mA per channel |
| DIO Output Leakage Current | 3.6 mA @ 24 VDC |
| • Power Requirements | |
| Power Consumption | • Always on: 156 mA @ 24 VDC • On demand: 138 mA @ 24 VDC |
| • MTBF (mean time between failures) | |
| Time | 407,406 hrs |
| Database | Telcordia (Bellcore) |
| Common Specifications | |
| • Computer | |
| CPU | ARM9 based CPU, 32-bit/160 MHz |
| SDRAM/Flash | 2 MB |
| • Storage | |
| Expansion Slot | Up to 32 GB SD™ memory card (SD 2.0 compatible) |
| Note | For units operating in extreme temperatures, industrial grade, wide-temperature SD cards are required. |
| • Cellular | |
| Network | Quad-band GSM/GPRS/EDGE 850/900/1800/1900 MHz |
| Internet | HSPA+: • Up to 5.76 Mbps upload speed. • Up to 14.4 Mbps download speed. UMTS: Up to 384k bps upload/download speed. GPRS/EDGE: • Multi-slot class: Class 12 • Coding schemes: CS1 to CS4 • Terminal device class: Class B |
| SMS | Point-to-Point Text/PDU mode |
| SIM Control Voltage | 3 V / 1.8 V |
| • LAN | |
| Ethernet | 1 10/100 Mbps RJ45 port |
| Protection | 1.5 kV magnetic isolation |
| Protocols | Modbus/TCP, TCP/IP, UDP, DHCP, BOOTP, SNMP, SNTP |
| • Serial Communication | |
| Interface | 1 x RS-232/422/485, software selectable (9-pin D-Sub male, or 5-contact terminal block) |
| Baudrate | 300, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps |
| • Power Requirements | |
| Power Input | 24 VDC nominal, 12 to 36 VDC |
| • Physical Characteristics | |
| Dimensions | 46.8 x 135 x 105 mm (1.84 x 5.31 x 4.13 in) |
| Weight | 495 g |
| Mounting | DIN rail (standard), wall (optional) |
| • Environmental Limits | |
| Operating Temperature | Standard Models: -10 to 55°C (14 to 131°F) Wide Temp. Models: -30 to 70°C (-22 to 158°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| Altitude | Up to 2000 m |
| Note | Please contact Moxa if you require products guaranteed to function properly at higher altitudes. |
| • Standards and Certifications | |
| Safety | UL 508, EN 60950-1, NCC |
| EMI | EN 55022; EN 61000-3-2; EN 61000-3-3; FCC Part 15, Subpart B, Class A |
| EMS | EN 55024, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11, EN 61000-6-2 |
| Shock | IEC 60068-2-27 |
| Freefall | IEC 60068-2-32 |
| Vibration | IEC 60068-2-6 |
| Green Product | RoHS, CRoHS, WEEE |
| Note | Please check Moxa’s website for the most up-to-date certification status. |
| • Warranty | |
| Warranty Period | 2 years* |
| Note | *Because of the limited lifetime of power relays, products that use that component are covered by a 2-year warranty. |
| Details | See www.moxa.com/warranty |
