Category Archives: Switches

TRENDnet TPE-T80 8-Port 30 Watt 10/100Mbps PoE+ Switch

Posted on by

TPE-T80-1  TRENDnet’s 8-Port 30 Watt 10/100Mbps PoE+ Switch, model TPE-T80, reduces equipment and installation costs by delivering data and power over existing Ethernet cables. The IEEE 802.3at PoE+ standard supplies up to 30 watts of power per port for devices such as high power wireless access points, PTZ (Pan Tilt Zoom) Network Cameras, and VoIP telephony systems.

Auto sensing technology delivers up to 30 watts to 802.3at PoE+, 15 watts to 802.3af PoE, and only data to non-PoE devices. GREENnet technology reduces energy costs by up to 75% when the switch is not in use.

Boost office efficiency and reduce network congestion with a total switching capacity of 1.6Gbps. LED indicators display device status for easy power management and troubleshooting. An internal power supply reduces clutter and DIP switches on the front panel allow managers to manually cut PoE power to a given port. Use this switch with TRENDnet PoE Splitters to install non-PoE devices in remote locations.

TPE-T80-2Feature :

  • IEEE 802.3at and IEEE 802.3af Power over Ethernet (PoE) compliant
  • Support PoE class 2 (7 watts) , 3 (15.4 watts), and 4 (30 watts)
  • 8 x 10/100Mbps Auto-MDIX PoE+ ports
  • Provides up to 30 watts per PoE port
  • 1.6 Gbps switching fabric
  • 8 DIP switches turns PoE support on/off per port
  • Full wire-speed non-blocking reception and transmission
  • Store-and-forward switching method
  • Back pressure Flow Control for half-duplex mode
  • IEEE 802.3x Flow Control for full-duplex mode
  • 1.25Mbits RAM Data Buffer
  • 4K MAC address entries
  • 250 watt Internal Power supply: AC input (90~260V/AC, 50~60Hz)
  • Plug and Play
  • Sturdy metal enclosure
  • 3-year limited warranty

Diagram :Diagram TPE-T80Specification :

Hardware

  • Standard
    • IEEE 802.3 10Base-T
    • IEEE 802.3u 100Base-TX
    • IEEE 802.3at Power over Ethernet (PoE+)
    • IEEE 802.3af Power over Ethernet (PoE)
    • IEEE 802.3x Flow Control
  • Ports
    • 8 x 10/100Mbps Auto-MDIX PoE+ ports
  • PoE DIP Switches
    • Individually turns PoE support on/off for each port
  • Data Transfer Rate
    • Ethernet: 10/20Mbps (half/full duplex)
    • Fast Ethernet: 100/200Mbps (half/full duplex)
  • Data RAM Buffer
    • 1.25Mbits
  • Address Table
    • 4K MAC entries
  • Switch Fabric
    • 1.6 Gbps
  • Power
    • 90~260V AC 50/60Hz, internal universal switching power
  • Diagnostic LEDs
    • Power, PoE, Link/Activity
  • Power Consumption
    • Min: 4 Watts (standby)
    • Max: 250 Watts
    • PoE Max: 240 Watts (8 x 30 watts PoE devices connected)
  • Temperature
    • Operating: 0° ~ 55°C (32° ~ 131°F)
    • Storage: -20° ~ 90°C (-4° ~ 194°F)
  • Humidity
    • Max. 90% (non-condensing)
  • Dimensions
    • 263 x 160 x 44 mm (10.4 x 6.3 x 1.73 in.)
  • Weight
    • 1.3 kg (2.9 lbs.)
  • Certifications
    • CE, FCC

PoE

  • Power over Ethernet
    • Up to 30 watts per port; PD classification
    • Polymer switch for short protection
    • PoE: pin 3,6 for power+ and pin 1,2 for power- (mode A)

TRENDnet TPE-1620WS 16-Port Gigabit Web Smart PoE+ Switch

Posted on by

TPE-1620WS-1TRENDnet’s 16-Port Gigabit Web Smart PoE+ Switch, model TPE-1620WS, delivers a 32 Gbps switching capacity with 16 PoE+ Gigabit ports and two shared SFP slots. This IPv6 ready switch offers advanced traffic management, troubleshooting, security, energy saving GREENnet, and monitoring features at a reduced cost.

  • 16 x PoE+ Gigabit ports
  • 2 shared SFP slots
  • Up to 30 W per port with a 185 W total power budget
  • 32 Gbps switching capacity
  • Rack mountable

TPE-1620WS-2Feature :

Ease of Use
Hardware Design
Rack mountable housing features 16 Gigabit PoE+ ports (automatically supplies PoE+ (30 Watts) and PoE (15 Watts)) and two shared SFP slots
IPv6 Ready
This switch supports IPv6 configuration and neighbor IPv6 network support
Traffic Management
A broad range of network configurations are support by: 802.3ad link aggregation, Asymmetric VLAN, 802.1Q VLAN, Voice VLAN, GVRP, 802.1p Class of Service (CoS), and QoS queue scheduling
Troubleshooting
Real time traffic comparison charts, error group charts, and a convenient cable diagnostic test aides in rapid troubleshooting
Security
Features such as ACL, SSL, MAC/port filtering, 802.1X, TACACS+, and RADIUS are compatible with layered security controls
Monitoring
RMON, SNMP, SNMP Trap, and Port Mirroring support administrator monitoring solutions
Energy Savings
Up to 70% energy saving GREENnet technology

Diagram :

Diagram TPE-1620WSSpecification :

  • Standards
    • IEEE 802.1d
    • IEEE 802.1p
    • IEEE 802.1Q
    • IEEE 802.1s
    • IEEE 802.1w
    • IEEE 802.1X
    • IEEE 802.1ab
    • IEEE 802.3
    • IEEE 802.3u
    • IEEE 802.3x
    • IEEE 802.3z
    • IEEE 802.3ab
    • IEEE 802.3ad
    • IEEE 802.3af
    • IEEE 802.3at
    • IEEE 802.3az
  • Device Interface
    • 16 x Gigabit PoE+ ports
    • 2 x Shared SFP slots
    • LED indicators
  • Data Transfer Rate
    • Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex)
    • Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)
    • Gigabit Ethernet: 2000 Mbps (full duplex)
  • Performance
    • Switch fabric: 32 Gbps
    • Ram buffer: 8 Mbits
    • MAC Address Table: 16K entries
    • Jumbo Frames: 10 Kbytes
    • HOL Blocking Prevention
    • Forwarding rates: 23.8 Mpps
  • Management
    • HTTP/HTTPS (SSL v2/3 TLS) Web based GUI
    • SNMP v1, v2c, v3
    • RMON v1
    • Static Unicast MAC Address
    • Enable/disable 802.3az Power Saving
    • LLDP
    • Virtual Cable Test
    • IPv6: IPv6 Neighbor Discovery, IPv6 Static IP, DHCPv6, Auto configuration
  • MIB
    • MIB II RFC 1213
    • Bridge MIB RFC 1493
    • Bridge MIB Extension RFC 2674
    • SNMPv2 MIB RFC 1907
    • Ethernet Interface MIB RFC 1643
    • Ethernet –like MIB RFC 2863
    • Interface Group MIB RFC2233
    • MIB Traps Convention RFC 1215
    • RMON MIB RFC 1757, RFC 2819
    • 802.1p MIB RFC 2674
    • RADIUS Client Authentication MIB RFC 2618
    • LLDP-MIB IEEE 802.1ab
    • Ping MIB RFC 2925, RFC 4560
  • Spanning Tree
    • IEEE 802.1D STP (Spanning Tree protocol)
    • IEEE 802.1w RSTP (Rapid Spanning Tree protocol)
    • IEEE 802.1s MSTP (Multiple Spanning Tree protocol)
  • Link Aggregation
    • Static Link Aggregation
    • 802.3ad Dynamic LACP
  • Quality of Service (QoS)
    • 802.1p Class of Service (CoS)
    • DSCP (Differentiated Services Code Point)
    • Bandwidth Control per port
    • Queue Scheduling: Strict Priority, Weighted Round Robin (WRR)
  • VLAN
    • Multiple management VLAN assignment
    • Asymmetric VLAN
    • 802.1Q Tagged VLAN
    • Dynamic GVRP
    • Up to 256 VLAN groups, ID Range 1-4094
    • Private VLAN (Protected Ports)
    • Voice VLAN (10 user defined OUIs)
  • Multicast
    • IGMP Snooping v1, v2, v3 (per VLAN)
    • Static Multicast Address
    • Up to 256 multicast entries
  • Port Mirror
    • RX, TX, or Both
    • One to one
    • Many to one
  • Security
    • 802.1X Port-Based Network Access Control , RADIUS, TACACS+
    • Local Dial In User Authentication
    • DHCP Snooping (per VLAN)
    • Loopback Detection
    • Duplicated Address Detection
    • Denial of Service (DoS)
  • ACL IPv4 L2-L4 & IPv6
    • MAC Address
    • VLAN ID
    • Ether Type (IPv4 only)
    • IP Protocol 0-255
    • TCP/UDP Port 1-65535
    • 802.1p
    • DSCP (IPv4 only)
    • IPv6 Address (IPv6 only)
  • Compatibility
    • Optional Software Utility: Windows® 8.1 (32/64-bit), 8 (32/64-bit), 7 (32/64-bit), Vista (32/64-bit), XP (32/64-bit), Windows® 2003/2008 Server (32/64-bit)
  • Special Features
    • PoE+
    • IPv6
    • 802.3az power saving
    • Rack mountable
  • Power
    • Input: 100 – 240 V AC, 50/60 Hz, internal power supply
    • Consumption: 198 Watts (Max)
    • PoE budget: 185 Watts
  • Operating Temperature
    • 0 – 45 °C (32 – 113 °F)
  • Operating Humidity
    • Max 90% non-condensing
  • Dimensions
    • 440 x 251 x 44.45 mm (17.3 x 9.9 x 1.75 in.)
    • Rack mountable 1U height
  • Weight
    • 3.6 kg (7.9 lbs.)
  • Certifications
    • CE
    • FCC
  • Warranty
    • 3-year limited

TRENDnet TPE-1020WS 10-Port Gigabit Web Smart PoE+ Switch

Posted on by

TPE-1020WS-1TRENDnet’s 10-Port Gigabit Web Smart PoE+ Switch, model TPE-1020WS, delivers a 20 Gbps switching capacity with eight PoE+ Gigabit ports and two Gigabit Ethernet uplink ports shared with two SFP slots. This IPv6 ready switch offers advanced traffic management, troubleshooting, security, energy saving GREENnet, and monitoring features at a reduced cost.

  • 8 x PoE+ Gigabit ports
  • 2 x Gigabit Ethernet ports and 2 x shared SFP slots
  • Up to 30 Watts per port with a 75 Watts total power budget
  • 20 Gbps switching capacity
  • Rack mountableTPE-224WS-2Feature :
Hardware Design
Fanless rack mountable housing features eight Gigabit PoE+ ports (automatically supplies PoE+ (30 Watts) and PoE (15 Watts)) and two Gigabit Ethernet uplink ports shared with two SFP slots
IPv6 Ready
This switch supports IPv6 configuration and neighbor IPv6 network support
Traffic Management
A broad range of network configurations are support by: 802.3ad link aggregation, Asymmetric VLAN, 802.1Q VLAN, Voice VLAN, GVRP, 802.1p Class of Service (CoS), and QoS queue scheduling
Troubleshooting
Real time traffic comparison charts, error group charts, and a convenient cable diagnostic test aides in rapid troubleshooting
Security
Features such as ACL, SSL, MAC/port filtering, 802.1X, TACACS+, and RADIUS are compatible with layered security controls
Monitoring
RMON, SNMP, SNMP Trap, and Port Mirroring support administrator monitoring solutions
Energy Savings
Up to 70% energy saving GREENnet technology

Diagram :

Diagram TPE-1020WS

Specification :

  • Standards
    • IEEE 802.1d
    • IEEE 802.1p
    • IEEE 802.1Q
    • IEEE 802.1s
    • IEEE 802.1w
    • IEEE 802.1X
    • IEEE 802.1ab
    • IEEE 802.3
    • IEEE 802.3u
    • IEEE 802.3x
    • IEEE 802.3z
    • IEEE 802.3ab
    • IEEE 802.3ad
    • IEEE 802.3af
    • IEEE 802.3at
    • IEEE 802.3az
  • Device Interface
    • 8 x Gigabit PoE+ ports (ports 1-8)
    • 2 x Gigabit Ethernet ports (ports 9-10)
    • 2 x Shared SFP slots (shared with ports 9-10)
    • LED indicators
  • Data Transfer Rate
    • Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex)
    • Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)
    • Gigabit Ethernet: 2000 Mbps (full duplex)
  • Performance
    • Switch fabric: 20 Gbps
    • Ram buffer: 8 Mbits
    • MAC Address Table: 16K entries
    • Jumbo Frames: 10 Kbytes
    • HOL Blocking Prevention
    • Forwarding rates: 14.88 Mppst
  • Management
    • HTTP/HTTPS (SSL v2/3 TLS) Web based GUI
    • SNMP v1, v2c, v3
    • RMON v1
    • Static Unicast MAC Address
    • Enable/disable 802.3az Power Saving
    • LLDP
    • Virtual Cable Test
    • IPv6: IPv6 Neighbor Discovery, IPv6 Static IP, DHCPv6, Auto configuration
  • MIB
    • MIB II RFC 1213
    • Bridge MIB RFC 1493
    • Bridge MIB Extension RFC 2674
    • SNMPv2 MIB RFC 1907
    • Ethernet Interface MIB RFC 1643
    • Ethernet –like MIB RFC 2863
    • Interface Group MIB RFC2233
    • MIB Traps Convention RFC 1215
    • RMON MIB RFC 1757, RFC 2819
    • 802.1p MIB RFC 2674
    • RADIUS Client Authentication MIB RFC 2618
    • LLDP-MIB IEEE 802.1ab
    • Ping MIB RFC 2925, RFC 4560
  • Spanning Tree
    • IEEE 802.1D STP (Spanning Tree protocol)
    • IEEE 802.1w RSTP (Rapid Spanning Tree protocol)
    • IEEE 802.1s MSTP (Multiple Spanning Tree protocol)
  • Link Aggregation
    • Static Link Aggregation
    • 802.3ad Dynamic LACP
  • Quality of Service (QoS)
    • 802.1p Class of Service (CoS)
    • DSCP (Differentiated Services Code Point)
    • Bandwidth Control per port
    • Queue Scheduling: Strict Priority, Weighted Round Robin (WRR)
  • VLAN
    • Multiple management VLAN assignment
    • Asymmetric VLAN
    • 802.1Q Tagged VLAN
    • Dynamic GVRP
    • Up to 256 VLAN groups, ID Range 1-4094
    • Private VLAN (Protected Ports)
    • Voice VLAN (10 user defined OUIs)
  • Multicast
    • IGMP Snooping v1, v2, v3 (per VLAN)
    • Static Multicast Address
    • Up to 256 multicast entries
  • Port Mirror
    • RX, TX, or Both
    • One to one
    • Many to one
  • Security
    • 802.1X Port-Based Network Access Control, RADIUS, TACACS+
    • Local Dial In User Authentication
    • DHCP Snooping (per VLAN)
    • Loopback Detection
    • Duplicated Address Detection
    • Trusted Host
    • Denial of Service (DoS)
  • ACL IPv4 L2-L4 & IPv6
    • MAC Address
    • VLAN ID
    • Ether Type (IPv4 only)
    • IP Protocol 0-255
    • TCP/UDP Port 1-65535
    • 802.1p
    • DSCP (IPv4 only)
    • IPv6 Address (IPv6 only)
  • Compatibility
    • Optional Software Utility: Windows® 8.1 (32/64-bit), 8 (32/64-bit), 7 (32/64-bit), Vista (32/64-bit), XP (32/64-bit), Windows® 2003/2008 Server (32/64-bit)
  • Special Features
    • PoE+
    • Fanless design
    • IPv6
    • 802.3az power saving
    • Rack mountable
  • Power
    • Input: 100 – 240 V AC, 50/60 Hz, internal power supply
    • Consumption: 92.3 Watts (Max)
    • PoE budget: 75 Watts
  • Operating Temperature
    • 0 – 45 °C (32 – 113 °F)
  • Operating Humidity
    • Max 90% non-condensing
  • Dimensions
    • 330 x 183 x 44.45 mm (13 x 7.2 x 1.75 in.)
    • Rack mountable 1U height
  • Weight
    • 1.9 kg (4.1 lbs.)
  • Certifications
    • CE
    • FCC
  • Warranty
    • 3-year limited

TRENDnet TPE-TG80g 8-Port Gigabit GREENnet PoE+ Switch

Posted on by

TPE-TG80G-1 TRENDnet’s 8-Port Gigabit GREENnet PoE+ Switch, model TPE-TG80g, reduces equipment and installation costs by delivering data and power over existing Ethernet cables. This unmanaged switch offers eight Gigabit PoE+ ports which supply up to 30 watts of power per port for devices such as high power wireless access points, PTZ (Pan / Tilt / Zoom) Network Cameras, and VoIP telephony systems.

Auto sensing technology delivers 30 watts to 802.3at PoE+ devices (up to 3 devices), 15 watts to 802.3af PoE devices, and only data to non-PoE devices. GREENnet technology reduces energy consumption by up to 75% when the switch is not in use. Boost office efficiency and reduce network congestion with a total switching capacity of 16 Gbps. LED indicators display device status for efficient troubleshooting. This switch comes in a sturdy metal case and quickly adds PoE+, PoE, and non-PoE devices to your network.

  • 8 x Gigabit PoE+ ports (up to 30 watts per PoE+ port)
  • Up to 30 W per port with 105 W total power budget
  • Reduces equipment cost by delivering data and power over existing network cables
  • 16 Gbps switching capacity
  • Up to 30 W per port with 125 W total power budget
  • Sturdy metal case
  • Up to 75% GREENnet power savings

TPE-TG80G-2Feature :

  • IEEE 802.3at and IEEE 802.3af Power over Ethernet (PoE) compliant
  • Supports PoE Class 2 (7 watts) , 3 (15.4 watts), and 4 (30 watts)
  • 8 x Gigabit Auto-MDIX PoE / PoE+ ports
  • Provides up to 30 watts for PoE+
  • Provides up to 15.4 watts for PoE
  • Automatically detects the PoE class level of a Powered Device
  • 16 Gbps switching fabric
  • Forwarding Rate: 1000 Mbps (1,488,000 pps), 100 Mbps (148,800 pps), 10 Mbps (14,880 pps)
  • Status LEDs: System Power, PoE, 1000 Mbps, and Link/Activity
  • 1K Mac address entries
  • 96 Kbyte memory buffer
  • Full wire-speed non-blocking reception and transmission
  • Store-and-forward switching method
  • Back pressure Flow Control for Half-Duplex mode
  • IEEE 802.3x Flow Control for Full-Duplex mode
  • Power saving technology powers down unused ports and when a connected device is in standby mode
  • Jumbo Frame support up to 9K
  • Plug and Play
  • Sturdy metal case
  • 3-year limited warranty

Diagram :

Diagram TPE-TG80GSpecification :

Hardware

  • Standard
    • IEEE 802.3 10Base-T
    • IEEE 802.3u 100Base-TX
    • IEEE 802.3ab 1000Base-T
    • IEEE 802.3at Power over Ethernet (PoE+)
    • IEEE 802.3af Power over Ethernet (PoE)
    • IEEE 802.3X Flow Control
    • IEEE 802.3az Energy Efficient Ethernet
  • Ports
    • 8 x Gigabit Auto-MDIX PoE / PoE+ ports
  • Data Transfer Rate
    • Ethernet: 10/20 Mbps (Half / Full Duplex)
    • Fast Ethernet: 100/200 Mbps (Half / Full Duplex)
    • Gigabit: 2000 Mbps (Full Duplex)
  • Forwarding Rate
    • 1,000 Mbps: 1,488,000 pps
    • 100 Mbps: 148,800 pps 1
    • 10 Mbps: 14,880 pps
  • Data RAM Buffer
    • 96 Kbytes
  • Address Table
    • 1K MAC entries
  • Switch Fabric
    • 16 Gbps
  • Power
    • Input: 100-240V 50/60 Hz, 2.1A
    • Output: 52VDC, 2.31A External Power Adapter
  • Diagnostic LEDs
    • Power, PoE, 1000 Mbps, Link/Activity
  • Power Consumption
    • Min: 5 watts (standby)
    • Max: 120 watts
    • PoE Max: 105 watts
    • (7 x 15 watts PoE devices connected or 3 x 30 watts PoE+ devices connected)
  • Temperature
    • Operating: 0° ~ 40°C (32° ~ 104°F)
    • Storage: -20° ~ 90°C (-4° ~ 194°F)
  • Humidity
    • Max 90% (non-condensing)
  • Dimensions
    • 142 x 95 x 30 mm (5.6 x 3.7 x 1.2 in.)
  • Weight
    • 400 g (14 oz.)
  • Certifications
    • CE, FCC

PoE

  • Power over Ethernet
    • Up to 15.4 watts for PoE Up to 30 watts for PoE+ PoE: pin 3, 6 for power+ and pin 1, 2 for power- (mode A)

TRENDnet TPE-TG44g 8-Port GREENnet Gigabit PoE+ Switch

Posted on by

TPE-TG44G-1 TRENDnet’s 8-Port GREENnet Gigabit PoE+ Switch, model TPE-TG44g, reduces equipment and installation costs by delivering data and power over existing Ethernet cables. This unmanaged switch offers four Gigabit PoE+ and four Gigabit non-PoE ports. The PoE+ standard supplies up to 30 watts of power per port for devices such as high power wireless access points, PTZ (Pan Tilt Zoom) Internet cameras, and VoIP telephony systems.

Auto sensing technology delivers 30 watts to 802.3at PoE+ devices (up to 2 devices), 15 watts to 802.3af PoE devices (up to 4 devices), and only data to non-PoE devices. GREENnet technology reduces energy consumption by up to 75% when the switch is not in use. Boost office efficiency and reduce network congestion with a total switching capacity of 16 Gbps. LED indicators display device status for efficient troubleshooting. This switch comes in a sturdy metal case and quickly adds PoE+, PoE, and non-PoE devices to your network.

  • 4 x Gigabit PoE/PoE+ ports
  • 4 x Gigabit ports
  • Reduces equipment cost by delivering data and power over existing network cables
  • 16 Gbps switching capacity
  • Sturdy metal case
  • Up to 75% GREENnet power savings
  • Up to 30 Watts per port with a 72 Watt total power budget

TPE-TG44G-2Feature :

  • 8-Port GREENnet Gigabit PoE+ Switch
  • IEEE 802.3at and IEEE 802.3af Power over Ethernet (PoE) compliant
  • Supports PoE Class 2 (7 watts) , 3 (15.4 watts), and 4 (30 watts)
  • 4 x Gigabit Auto-MDIX PoE/PoE+ RJ-45 ports
  • 4 x Gigabit Auto-MDIX RJ-45 ports
  • Provides up to 30 watts for PoE+ (2 ports Max)
  • Provides up to 15.4 watts for PoE (4 ports Max)
  • Automatically detects the PoE class level of a Powered Device
  • 16 Gbps switching fabric
  • Forwarding Rate: 11.9mpps
  • Status LEDs: System Power, PoE, 1000 Mbps, and Link/Activity
  • 1K Mac address entries
  • 96Kbyte memory buffer
  • Full wire-speed non-blocking reception and transmission
  • Store-and-forward switching method
  • Back pressure Flow Control for Half-Duplex mode
  • IEEE 802.3x Flow Control for Full-Duplex mode
  • Power saving technology powers down unused ports and when a connected device is in standby mode
  • Jumbo Frame support up to 9K
  • Plug and Play
  • Sturdy metal case
  • 3-year limited warranty

Diagram :

Diagram TPE-TG44GSpecification :

Hardware

  • Standard
    • IEEE 802.3 10Base-T
    • IEEE 802.3u 100Base-TX
    • IEEE 802.3u 100Base-TX
    • IEEE 802.3ab 1000Base-T
    • IEEE 802.3at Power over Ethernet (PoE+)
    • IEEE 802.3af Power over Ethernet (PoE)
    • IEEE 802.3X Flow Control
    • IEEE 802.3az Energy Efficient Ethernet
  • Ports
    • 4 x Gigabit Auto-MDIX PoE+ RJ-45 ports
    • 4 x Gigabit Auto-MDIX RJ-45 ports
  • Data Transfer Rate
    • Ethernet: 10/20 Mbps (Half/Full Duplex)
    • Fast Ethernet: 100/200 Mbps (Half/Full Duplex)
    • Gigabit: 2000 Mbps (Full Duplex)
  • Forwarding Rate
    • 11.9 mpps (based on 64-byte packet size)
  • Data RAM Buffer
    • 96K bytes
  • Address Table
    • 1K MAC entries
  • Switch Fabric
    • 16 Gbps
  • Power
    • Input: 100-240 V AC 50/60 Hz, 1.5 A
    • Output: 52 V DC, 1.38 A External Power Adapter
  • Diagnostic LEDs
    • Power, PoE, 1000 Mbps, Link/Activity
  • Power Consumption
    • Min: 4 Watts (standby)
    • Max: 72 Watts
    • PoE Max: 68 Watts
    • (4 x 15 watts PoE devices connected or 2 x 30 watts PoE+ devices connected)
  • Temperature
    • Operating: 0° ~ 40°C (32° ~ 104°F)
    • Storage: -20° ~ 90°C (-4° ~ 194°F)
  • Humidity
    • Max. 90% (non-condensing)
  • Dimensions
    • 142 x 95 x 30 mm (5.6 x 3.7 x 1.2 in.)
  • Weight
    • 380 g (13.4 oz.)
  • Certifications
    • CE, FCC

PoE

  • Power over Ethernet
    • Up to 15.4 watts for PoE
    • Up to 30 watts for PoE+
    • PoE: pin 3,6 for power+ and pin 1,2 for power- (mode A)