Oring TGPS-1080-M12-BP2-24V EN50155 8-port unmanaged Gigabit PoE Ethernet switch with 8×10/100/1000Base-T(X) P.S.E., M12 connector and 2xbypass included

Posted on by

ORing’s TransporterTM series un-managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications.  The TGPS-1080-M12-BP2 is an un-managed PoE Ethernet switch with 8×10/100/1000Base-T(X) P.S.E. (4 of these ports also double as 2 sets of bypass ports), which is specifically designed for the toughest and fully compliant with EN50155 requirement.  TGPS-1080-M12-BP2 also supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network.  Each TGPS-1080-M12-BP2 switch has 8X10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports.  P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup.  TGPS-1080-M12-BP2 EN50155 Ethernet switch use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock.  TGPS-1080-M12-BP2 includes 2 sets of bypass ports that protect the network from failures and Network maintenance by ensuring network integrity during power loss.  T e wide operating temperature range from -40°C to 70°C can satisfy most of operating environment.  Therefore, the switch is one of the most reliable choices for rolling stock and highly-managed PoE Ethernet application.

Feature :

  • Leading EN50155-compliant Ethernet switch for rolling stock application
  • Provide 8×10/100/1000Base-T(X) PoE (P.S.E.) ports
  • Supports IEEE 802.3at compliant PoE and with maximum 30Watts per port
  • Support dual power inputs for power redundancy
  • Built-in 2 sets of bypass ports
  • Support auto-negotiation and auto-MDI/MDI-X
  • Support store and forward transmission
  • Support flow control
  • M12 connectors to guarantee reliable operation against environmental disturbances
  • Rigid IP-40 housing design
  • Wall mounting enabled

Specification :

ORing Switch Model TGPS-1080-M12-BP2-24V TGPS-1080-M12-BP2
Physical Ports
10/100/1000Base-T(X) Ports in M12 With P.S.E. 8 x M12 connector (8-pin A-coding, bypass function included by last 4 ports)
Technology
Ethernet Standards IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
IEEE 802.3at compliant PoE specification (total power budget is 120Watts with maximum 30Watts per port)
MAC Table 8K MAC addresses
Processing Store-and-Forward
LED Indicators
Power Indicator Green : Power LED x 3
Fault indicator Amber : Indicate PWR1 or PWR2 failure
10/100/1000Base-T(X) M12 port indicator and PoE indicator Top Green for port Link/Act indicator
Middle Amber for Duplex / Collision indicator
Bottom Blue for PoE power injected indicator
Fault Contact
Relay Relay output to carry capacity of 3A at 24VDC on M12 connector (5-pin A-coding)
Power
Redundant Input Power Dual DC inputs. 24VDC (12 ~ 57VDC) on 5-pin M23 connector Dual DC inputs. 50~57VDC on 5-pin M23 connector
Power Consumption (Typ.) 11 Watts (power consumption of P.S.E. is not included) 6 Watts
PoE Output power 60 Watts (12~24VDC) / 120 Watts (24~57VDC) 240 Watts
Overload Current Protection Present
Reverse Polarity Protection Present
Physical Characteristics
Enclosure IP-40
Dimensions (W x D x H) 125 (W) x 65 (D) x 196(H) mm
Weight (g) 1010 g 952 g
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals
EMI FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
EMS IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11
Shock IEC60068-2-27, EN61373
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 5 years

 

Related Posts