Oring IPS-2042TX-SS-SC Industrial 6-port lite-managed PoE Ethernet switch with 4×10/100Base-T(X) P.S.E. and 2×10/100Base-T(X)

Posted on by

Oring IPS-2042TX-SS-SCIPS-2042TX/2042FX series are lite-managed redundant ring Ethernet switches with 4×10/100Base-T(X) ports with PoE P.S.E. function and 2×10/100Base- T(X) or 2x100Base-FX fiber ports. IPS series support Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IPS switches has 4X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring, O-Chain and STP/RSTP (IEEE802.1w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IPS-2042TX / 2042FX series can be managed centralized and convenient by a powerful windows utility — Open-Vision. The wide operating temperature range from -40°C to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for easy managed and Fiber Ethernet application.

Feature :

  • IPS-2042TX provides 4×10/100Base-T(X) P.S.E. and 2×10/100Base-T(X) ports
  • IPS-2042FX series provide 4×10/100Base-T(X) P.S.E. and 2x100Base-FX single/multi mode fiber ports
  • Fastest Redundant Ethernet Ring: O-Ring (Recovery time < 10ms over 250 units of connection)
  • Open-Ring supports the other vendor’s ring technology in open architecture
  • O-Chain support the multiple redundant ring technology
  • Provides Fast recovery technology for Ethernet multi-redundancy
  • STP/RSTP supported
  • SNMP v1/v2c/v3 support for secured network management
  • Supports LLDP (Link Layer Discovery Protocol)
  • Configurable by Web-based and Windows utility (Open-Vision)
  • Event notification through Syslog, Email, and SNMP trap
  • Two 100Base-FX fiber port support for long distance connection
  • Four P.S.E. ports based on IEEE 802.3af standard – up to 25 Watts per port
  • Rigid IP-30 housing design
  • DIN-Rail and wall mounting enabled

Specification :

ORing Switch Model IPS-2042TX IPS-2042FX-MM-SC IPS-2042FX-SS-SC
Physical Ports
Physical Ports
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX with P.S.E. 4 4 4
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX without P.S.E. 2 - -
Fiber Ports Number - 2 2
Fiber Ports Standard - 100Base-FX 100Base-FX
Fiber Mode - Multi-mode Single-mode
Fiber Diameter (μm) - 62.5/125 μm
50/125 μm		 9/125 μm
Fiber Optical Connector - SC SC
Fiber Ports Specifications Typical Distance (km) - 2 km 30 km
Wavelength (nm) - 1310 nm 1310 nm
Max. Output Optical Power (dBm) - -14 dBm -8 dBm
Min. Output Optical Power (dBm) - -23.5 dBm -15 dBm
Max. Input Optical Power(Saturation) - 0 dBm 0 dBm
Min. Input Optical Power (Sensitivity) - -31 dBm -34 dBm
Link Budget (dB) - 7.5 dB 19 dB
Technology
Ethernet Standards IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3x for Flow control
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.3af PoE specification (up to 25 Watts per port for P.S.E.)
MAC Table 2048 MAC addresses
Processing Store-and-Forward
Switch Properties Switching bandwidth : 1.2Gbps
VLAN : Port Based
Security Features Enable/disable ports
VLAN to segregate and secure network traffic
Software Features STP/RSTP (IEEE 802.1D/w)
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units
Open-Ring support the other vendor’s ring technology in open architecture
Port configuration, status, statistics, monitoring, security
DHCP Client
Network Redundancy O-Ring
Open-Ring
O-Chain
Fast recovery
STP
RSTP
LED Indicators
Power /PoE Indicator Green : Power LED x 3, Green : PoE LED x 4
R.M. Indicator Green : Indicates that the system is operating in O-Ring Master mode
Fault Indicator Amber : Indicates unexpected event occurred
O-Ring Indicator Green : Indicates that the system is operating in O-Ring mode
10/100Base-T(X) RJ45 Port Indicator Green for port Link/Act. Amber for Link
Fiber Port Indicator Green for port Link/Act. Amber for Link
Power
Redundant Input Power Triple DC inputs. 2x48VDC on 7-pin terminal block , 1x48VDC on power jack
Power Consumption (Typ.) 5 Watts 7 Watts 7 Watts
Overload Current Protection Present
Reverse Polarity Protection Present on terminal block
Physical Characteristics
Enclosure IP-30
Dimensions (W x D x H) 52(W)x106.1(D)x144.3(H) mm (2.05×4.18×5.68 inch.)
Weight (g) 696 g 709 g 709 g
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1,
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) 304,333 269,978 270,625
Warranty 5 years

Related Posts