TRENDnet TPE-TG50g 5-Port Gigabit PoE+ Switch

Posted on April 12, 2017 by

The 5-Port Gigabit PoE+ Switch, model TPE-TG50g, delivers data and power over existing Ethernet cables to Power over Ethernet (PoE) devices such as Access Points and IP Cameras. It supports both PoE (802.3af) and PoE+ (802.3at) devices with a 31 Watt PoE budget. Plug and Play this sturdy metal switch for reliable high speed PoE networking.

4 x Gigabit PoE+ ports and 1 x Gigabit port
31 Watt PoE budget
10 Gbps switching capacity
Sturdy metal switch
Plug and Play installation
Use with TRENDnet’s PoE Splitter to network and power non-PoE devices
Limited Lifetime Warranty*

Feature :

Hardware
	PoE+ Supplies up to 30 Watts of PoE power per port with a 31 Watt PoE budget
	Ports 4 x Gigabit PoE+ ports and 1 x Gigabit port
	Switching Capacity 10 Gbps switching capacity
	Jumbo Frame Sends larger packets, or Jumbo Frames (up to 9 KB) for increased performance
	Energy Savings Embedded GREENnet technology reduces power consumption by up to 70%*
	Housing Rugged metal enclosure
	LED Indicators LED indicators convey port status

Diagram :

Specification :

Standards

IEEE 802.3
IEEE 802.3u
IEEE 802.3x
IEEE 802.3ab
IEEE 802.3af (15.4 Watts/port)
IEEE 802.3at (30 Watts/port)
IEEE 802.3az

Device Interface

4 x Gigabit PoE/PoE+ ports
1 x Gigabit port
LED indicators

Data Transfer Rate

Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex)
Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)
Gigabit: 2000 Mbps (full duplex)

Performance

Data RAM Buffer: 96 KB
Switch Fabric: 10 Gbps
MAC Address Table: 1 K entries
Forwarding rate: 7.44 Mpps (64-byte packet size)
Jumbo Frame: 9 K

Special Features

GREENnet energy saving technology

Power

Input: 110-240 V AC, 50/60 Hz, 0.75 A
Output: 48 V DC, 0.75 A
Consumption: 36 Watts (Max.)

PoE

PoE budget: 31 Watts
Pin 1,2 for power+ and pin 3,6 for power- (mode A)

Operating Temperature

0 – 40 °C (32 – 104 °F)

Operating Humidity

Max. 90% non-condensing

Dimensions

141 x 95 x 30 mm (5.6 x 3.7 x 1.2 in.)

Weight

370 g (13 oz.)

Certifications

Warranty

Limited Lifetime Warranty*

TRENDnet TPE-E100 Gigabit PoE+ Repeater

Posted on April 12, 2017 by

TRENDnet’s Gigabit PoE+ Repeater, model TPE-E100, extends a Gigabit PoE/PoE+ network connection to a remote location. It auto-detects a PoE (15.4 Watts) or PoE+ (30 Watts) signal and extends it an additional 100 meters (328 ft.) for a total distance of up to 200 meters (656 ft.) from the PoE device. Daisy chain two TPE-E100s for a total PoE network extension of 300 m (980 ft.)*. Handy mounting points and no external power adapter facilitate remote installations.

Extends 100 meters for a total distance of up to 200 meters (656 ft.)
Daisy chain two TPE-E100s for a total PoE+ network extension of 300 m (980 ft.)
Plug and play installation
No external power required
Wall mountable
LED indicators
Rugged metal housing
* Optional power supply required to daisy chain more than the suggested amount of units.

Feature :

	Extension Distance Extends a PoE/PoE+ network connection an additional 100 (328 ft.) meters for a total distance of up to 200 meters (656 ft.) from the PoE device
	PoE/PoE+ Auto detects a 15.4 Watt PoE (IEEE 802.3af class 1-4) or 30 Watt PoE+ (IEEE 802.3at) network connection
	Gigabit Ports Gigabit ports extend a high performance wired connection
	Daisy Chain Daisy chain twoTPE-E100s for a total PoE network extension of 300 m (980 ft.)
	Plug and Play Plug and play PoE/PoE+ network cables
	PoE Powered No external power required—saves installation time and cost
	Mounting Wall mounting points for remote installations
	LED indicators LED indicators confirm PoE and network connectivity
	Housing Rugged metal enclosure

Diagram :

Specification :

Standards

IEEE 802.3
IEEE 802.3u
IEEE 802.3x
IEEE 802.3ab
IEEE 802.3af
IEEE 802.3at

Device Interface

1 x Gigabit PoE/PoE+ in port
1 x Gigabit PoE/PoE+ out port
1 x Power port (optional power adapter is not included)
LED indicators
Installation mounting points

Data Transfer Rate

Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex)
Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)
Gigabit: 2000 Mbps (full duplex)

Performance

SRAM buffer: 96 KB
MAC Address Table: 2 K
Maximum packet length up to 1.5 KB

Special Features

Extends a PoE/PoE+ network connection an additional 100 meters for a total distance of up to 200 meters (656 ft.)
Cascade up to 2 repeaters

Power

Powered by PoE/PoE+ Device
Consumption: 2 Watts (max.)
Optional Power Adapter * (Model Number: 48VDC0750)
Input: 100-240 V 50/60 Hz 0.75 A
Output: 48 VDC, 0.75 A
Consumption: 36 Watts (max. with use of power adapter sold separately)

Operating Temperature

0 – 45 °C (32 – 113 °F)

Operating Humidity

Max. 90% non-condensing

Dimensions

75 x 100 x 22 mm (3.0 x 3.9 x 0.9 in.)

Weight

228 g (8 oz.)

Certifications

Warranty

3 year limited

TRENDnet TI-PG541 5-Port Hardened Industrial Gigabit PoE+ DIN-Rail Switch

Posted on February 26, 2015 by

TRENDnet’s TI-PG541 is a reliable IP30 unmanaged PoE+ DIN-rail switch with hardened components rated for extreme industrial environments. It offers four Gigabit PoE+ ports (Ports 1-4, 802.3at), one Gigabit port, one SFP slot, and a full PoE power budget of 120 Watts. Dual redundant power inputs (power adapter sold separately) with overload current protection support zero downtime requirements. An alarm output can be triggered by a primary and/or redundant power failure.

4 x Gigabit PoE+ (802.3at) ports, 1 x Gigabit port, and 1 x Gigabit SFP slot
120 W full PoE+ power budget
12 Gbps switching capacity
Hardened IP30 rated metal switch with integrated DIN-Rail mount
-20 to 60 ºC (-4 to 140 ºF) operating temperature range
Dual redundant power inputs with overload current protection
Alarm output triggered by power failure
Power adapter sold separately

Feature :

	Full PoE+ Power Budget Supplies up to 30 Watts of PoE/PoE+ power per port (ports 1-4 802.3at/802.3af) with a 120 Watt PoE power budget
	Network Ports 5 x Gigabit Ethernet ports (port 1-4 PoE/PoE+) and 1 x SFP slot
	Integrated DIN-Rail Mount IP30 rated metal enclosure with integrated DIN-rail mounting hardware
	Switching Capacity 12 Gbps switching capacity
	Redundant Power Dual redundant power inputs with overload current protection (power adapter sold separately: model 48VDC3000)
	Alarm Output Alarm output triggered by power failure of primary and/or redundant power (defined by DIP switch)
	Jumbo Frame Sends larger packets, or Jumbo Frames (up to 10 KB), for increased performance
	Extreme Temperatures Hardened switch is rated for an operating temperature range of -20 to 60 ºC (-4 to 140 ºF)
	Electro Magnetic Compliance Complies with IEC61000-6-2 EMC generic standard immunity for industrial environments
	Shock and Vibration Resistant Rated for shock (IEC 60068-2-27), freefall (IEC 60068-2-32), and vibration (IEC 60068-2-6)
	LED Indicators LED indicators convey power, redundant power, alarm, SFP, and network port status
	Grounding Point Grounding point protects equipment from external electrical surges

Diagram :Specification :

Standards
- IEEE 802.3
- IEEE 802.3u
- IEEE 802.3ab
- IEEE 802.3z
- IEEE 802.3at
- IEEE 802.3af
- IEEE 802.3x
Device Interface
- 4 x Gigabit PoE+ ports
- 1 x Gigabit port
- 1 x Gigabit SFP slot
- 6-pin terminal block (removable)
- DIP switch
- DC power connector
- LED indicators
- Integrated DIN-Rail mount
Data Transfer Rate
- Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex)
- Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)
- Gigabit: 2000 Mbps (full duplex)
- SX/LX: 2000 Mbps (full duplex)
Performance
- Data RAM Buffer: 512 KB
- Switching Fabric: 12 Gbps
- MAC Address Table: 8 K entries
- Jumbo Frame: 10 KB
- Forwarding rate: 8.9 Mpps (64-byte packet size)
Special Features
- Full PoE+ power to each PoE+ port
- Hardened components rated for extreme temperatures
- Dual redundant power inputs
- Alarm output triggered by power failure
- Auto-Negotiation
- Auto store and forward architecture
- Automatic address learning and address aging
- ESD 8 KV and Surge 6 KV protection
Power Adapter (48VDC3000, Sold Separately)
- Input: 100 – 240 V AC, 50/60 Hz, 2 A
- Output: 48 V DC, 3.34 A 160 watts max.
Terminal Block
- Input: PWR (Primary): 48 – 57 V DC
- RPS (Redundant): 48 – 57 V DC
Power Consumption
- Min.: 10 Watts (standby)
- Max.: 130 Watts
- PoE budget: 120 Watts (Max.)
PoE
- Up to 15.4 watts/port for PoE
- Up to 30 watts/port for PoE+
- PoE: pin 1, 2 for power + and pin 3, 6 for power – (mode A)
Housing
- IP30 metal case
- Integrated DIN-rail mount
- Grounding point
- 8 KV ESD protection
- 6 KV Surge protection
Operating Temperature
- - 20 – 60 °C (- 4 – 140 °F)
Operating Humidity
- Max. 95 % non-condensing
Dimensions
- 135 x 100 x 30 mm (5.3 x 3.9 x 1.2 in.)
Weight
- 500 g (1.2 lbs.)
Certifications
- CE
- FCC
- Shock (IEC 60068-2-27)
- Freefall (IEC 60068-2-32)
- Vibration (IEC 60068-2-6)
Warranty
- 3 year limited

TRENDnet TPE-S160 16-Port 10/100Mbps PoE Switch

Posted on February 26, 2015 by

The 16-Port 10/100Mbps PoE Switch, model TPE-S160, reduces equipment and installation costs by delivering data and power over existing Ethernet cables to Power over Ethernet (PoE) enabled devices such as Access Points and IP Cameras. Boost office efficiency and reduce network congestion with a total switching capacity of 3.2Gbps. LED indicators display device status for easy power management and troubleshooting. An internal power supply reduces clutter and delivers 15.4 Watts to each PoE port. A convenient on/off button is located on the back of the switch. Non-PoE devices can connect to the switch—auto-sensing PoE technology cuts power to non-PoE connected devices. Use TRENDnet’s PoE Splitter to install non-PoE devices in remote locations.

Reduces equipment cost by delivering data and power over existing network cables
16 x 10/100Mbps Full Duplex PoE ports
Up to 15.4 W per port with 250 W total power budget
3.2Gbps switching capacity
Use with TRENDnet’s PoE Splitter to network and power non-PoE devices

Feature :

16 x 10/100Mbps Auto-MDIX RJ-45 PoE portsOn/off power switch
IEEE 802.3af Power over Ethernet (PoE) compliant
Supports PoE Powered Device (PD) classification
Provides 15.4 watts per PoE port
3.2Gbps switching fabric
Full wire-speed non-blocking reception and transmission
Store-and-forward switching method
Back pressure Flow Control for half-duplex mode
IEEE 802.3x Flow Control for full-duplex mode
1.5Mbits RAM Data Buffer
4K MAC address entries
Diagnostic LEDs (Power, Link/Activity, PoE Act/Status)
Plug and Play
Sturdy 19” wide metal enclosure
Rack mounting hardware included
3-year limited warranty

Diagram :

Specification :

Hardware

Standard
- IEEE 802.3 10Base-T
- IEEE802.3u 100Base-TX
- IEEE 802.3af Power over Ethernet
- IEEE 802.3x Flow Control
Ports
- 16 x 10/100Mbps Auto-MDIX PoE ports
Power Switch
- On/off power switch
Data Transfer Rate
- Ethernet: 10/20Mbps (half/full duplex)
- Fast Ethernet: 100/200Mbps (half/full duplex)
Data RAM Buffer
- 1.5Mbits
Address Table
- 4K MAC entries
Switch Fabric
- 3.2Gbps
Power
- 100~240VAC 50/60Hz, internal universal switching power
Diagnostic LEDs
- Power, Link/Activity, PoE Act/Status
Power Consumption
- 6 Watts max. (no Powered Device (PD) connected)
- 260 Watts max. (16 PoE devices connected)
Temperature
- Operating: 0° ~ 45°C (32° ~ 113°F)
- Storage: -10° ~ 70°C (14° ~ 158°F)
Humidity
- Max. 95% (non-condensing)
Dimensions
- 440 x 220 x 44 mm (17.3 x 8.7 x 1.7 in.)
Weight
- 3.1 kg (6.9 lbs.)
Certifications
- CE, FCC

PoE

Power over Ethernet
- Up to 15.4 watts per port; PD classification
- Polymer switch for short protection
- PoE: pin 3,6 for power+ and pin 1,2 for power-

TRENDnet TPE-T160 16-Port 30 Watt 10/100Mbps PoE+ Switch

Posted on February 18, 2015 by

TRENDnet’s 16-Port 30 Watt 10/100Mbps PoE+ Switch, model TPE-T160, reduces equipment and installation costs by delivering data and power over existing Ethernet cables. The IEEE 802.3at PoE+ standard supplies up to 30 watts of power per port for devices such as high power wireless access points, PTZ (Pan Tilt Zoom) Network Cameras, and VoIP telephony systems. Auto sensing technology delivers up to 30 watts to 802.3at PoE+, 15 watts to 802.3af PoE, and only data to non-PoE devices. GREENnet technology reduces energy costs by up to 75% when the switch is not in use.

Boost office efficiency and reduce network congestion with a total switching capacity of 3.2Gbps. LED indicators display device status for easy power management and troubleshooting. An internal power supply reduces clutter and a convenient on/off button is located on the back of the switch. Use this switch with TRENDnet PoE Splitters to install non-PoE devices in remote locations.Feature :

IEEE 802.3at and IEEE 802.3af Power over Ethernet (PoE) compliant
Support PoE class 2 (7 watts) , 3 (15.4 watts), and 4 (30 watts)
16 x 10/100Mbps Auto-MDIX PoE+ ports
Provides 30 watts per PoE port
3.2 Gbps switching fabric
On/off power switch
Full wire-speed non-blocking switching
Store-and-forward switching method
Back pressure Flow Control for half-duplex mode
IEEE 802.3x Flow Control for full-duplex mode
1.25Mbits RAM Data Buffer
4K MAC address entries
500 watt Internal Power supply: AC input (90~260V/AC, 50~60Hz)
Plug and Play
Sturdy 1U 19” rack mountable metal enclosure
3-year limited warranty

Diagram :Specification :

Hardware

Standard
- IEEE 802.3 10Base-T
- IEEE 802.3u 100Base-TX
- IEEE 802.3at Power over Ethernet (PoE+)
- IEEE 802.3af Power over Ethernet (PoE)
- IEEE 802.3x Flow Control
Ports
- 16 x 10/100Mbps Auto-MDIX PoE+ ports
Data Transfer Rate
- Ethernet: 10/20Mbps (half/full duplex)
- Fast Ethernet: 100/200Mbps (half/full duplex)
Data RAM Buffer
- 1.25Mbits
Address Table
- 4K MAC entries
Switch Fabric
- 3.2 Gbps
Power
- 90~260V AC 50/60Hz, internal universal switching power
Diagnostic LEDs
- Power, PoE, Link/Activity
Power Consumption
- Min: 10 Watts (standby)
- Max: 500 Watts
- PoE Max: 480 Watts (16 x 30 watts PoE devices connected)
Temperature
- Operating: 0° ~ 40°C (32° ~ 104°F)
- Storage: -20° ~ 90°C (-4° ~ 194°F)
Humidity
- Max. 90% (non-condensing)
Dimensions
- 440 x 220 x 45 mm (17.3 x 8.7 x 1.8 in.)
Weight
- 2.5 kg (5.5 lbs.)
Certifications
- CE, FCC

PoE

Power over Ethernet
- Up to 30 watts per port; PD classification Polymer switch for short protectionPoE: pin 3,6 for power+ and pin 1,2 for power- (mode A)