The VE892 is an Optical HDMI Extender that overcomes the length restriction of standard HDMI cables by using optical fiber to send high definition audio and video signals over large distances.

The VE892 accepts an audio-video stream from a local source and serializes the data to pass it over a single 3.125 Gbps optical link (for resolutions up to 1080p@60Hz at 24-bits).

The VE892 can also extend the IR remote control and transfer RS-232 (up to 115kbps) in both directions, allows you to connect serial devices such as touch screens and barcode scanners.

Feature :

• Extends the transmission range of HDMI, IR and RS-232 signals using one fiber optic cable
• Very long distance transmission – up to 20km
• HDMI (3D, Deep Color), HDCP compatible – signaling rates up to 3.125 Gbits
• Superior video quality – up to 1080p@60Hz
• Supports full frequency IR signal from 30KHz to 60KHz
• Uses one fiber optic cable to connect the local and remote units
• Supports wide screen formats
• Built-in 8KV/15KV ESD protection
• Features RS-232 serial port for connecting peripherals such as touch screens, barcode scanners, etc.
• Supports bi-directional IR signal transmission, one way at a time
• Rack-mountable
• Hot-pluggable

Diagram :

Specification :

Function			VE892T	VE892R
Connectors	HDMI In		1 x HDMI Type A Female (Black)	N/A
	HDMI Out		N/A	1 x HDMI Type A Female (Black)
	Optical In/Out		1 x LC Simplex Connector (SFP) (Bi-directional) *
	RS-232		1 x Terminal Block, 3 pole
	IR		1 x mini stereo jack (Black)
	Power		1 x DC Jack (Black)
Fiber Optics	Operating distance *		20 km with single mode (SM) fiber
	Wavelength		1310/1550 nm for SM
	Data rate		Single fiber: 1080p/60Hz (24-bits, 3.125G bps )
LEDs	Power/Link		1 (Green)
Power Consumption			DC5.3V, 5.6W	DC5.3V, 5.1W
Environment	Operating Temp.		0–50°C
	Storage Temp.		-20–60°C
	Humidity		0–80% RH, Non-condensing
Physical Properties	Housing		Metal
	Weight		0.42 kg	0.42 kg
	Dimensions (L x W x H)		14.69 x 10.30 x 3.00 cm	14.69 x 10.30 x 3.00 cm

* Note:
1. Operating distance is approximate. These are typical maximum distance that may vary depending on factors such as fiber type,fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
2. It is recommended that you use a Single Mode optical fiber cable that conforms to IEC 60793- 2-50 B1.1 or ITU-T G.652.B specifications.

• The specification and pictures are subject to change without notice.
• All trademarks and logos are the properties of their respective holders.