The CE790 is a IP based KVM Extender with automatic cable detection (Auto-MDIX) and RS-232 serial functionality that allows access to a computer system from a remote USB console (USB keyboard, monitor, and USB mouse) anywhere on the intranet.
The CE790 improves on previous designs by: 1) the addition of an intuitive On Screen Display (OSD) on both the transmitter and receiver units for easy setup and operation; 2) working over a standard TCP/IP LAN via inexpensive Cat 5e cable, allowing point-to-point, point-to-multipoint, and multipoint-to-multipoint administration without the need for an additional KVM switch; and 3) the addition of an RS-232 port, on both the transmitter and receiver Units – to connect to a serial terminal for configuration, and serial devices such as touchscreens and barcode scanners. * The CE790 can be installed in point to point, point to multipoint and multipoint to multipoint configurations. Multipoint configurations require a separate purchase – contact your delear for details.
* In multipoint configurations, the IGMP (Internet Group Management Protocol) function of your network switches/hubs should be enabled to avoid deterioration of data throughput. If you do not know how to enable IGMP, please contact your network administrator.
Feature :
- Remotely access computers on your KVM installation via intranet
- Dual console operation – control your system from both the transmitter and receiver USB consoles
- OSD (On Screen Display) on both the transmitter and receiver units
- Supports GUI operation*
- No software required – an HTTP server is embedded in both units
- Built-in ASIC for greater reliability and compatibility
- USB Keyboard and USB Mouse Ports
- RS-232 serial ports** – allows you to connect to a serial terminal for configuration, or serial devices such as touchscreens and barcode scanners
- Audio enabled
- USB overcurrent detection and prevention
- High resolution video – up to 1920 x 1080
- Supports widescreen formats
- Ultra-High quality video mode
- Hot pluggable
- Rack mountable
- Firmware upgradable
- Auto-MDIX – automatically detects cable type
Note:
* The CE790 AP and GUI operation instructions can be downloaded from the ATEN website (www.aten.com).
** RS-232 serial ports support Tx/Rx/CTS/RTS signals only.
Diagram :
Specification :
| Console Connectors | |
| Monitor | 1 x HDB-15 (F) |
| Keyboard | 1x USB type A (F) |
| Mouse | 1x USB type A (F) |
| Audio | 1 x Mini Stereo Jack (F) |
| Microphone | 1 x Mini Stereo Jack (F) |
| Connectors | |
| RS-232 | 2 x DB9 (1M / 1F) |
| Power | 1 x DC Jack |
| KVM Side Connections | |
| Keyboard, Video, Mouse | 1 x SPHD-15 (F) |
| Audio | 1 x Mini Stereo Jack (F) |
| Microphone | 1 x Mini Stereo Jack (F) |
| LAN Connection | 1 x RJ-45 (F) |
| Switches | |
| Mode Selection | 1 x Pushbutton ( OSD) |
| Port Selection | 1 x Pushbutton |
| Emulation | |
| Keyboard | USB |
| Mouse | USB |
| Video connections | |
| Input | VGA |
| Output | VGA |
| Video Resolution | Up to 1920 x 1080 |
| Power Adaptor Part # | |
| for North America | 0AD8-0605-24EG |
| for Continental Europe | 0AD6-1605-241G |
| for UK | 0AD4-3605-241G |
| Environment | |
| Operation Temperature | 32-122 F |
| Storage Temperature | 25 ~ 140 F |
| Humidity | 0 ~ 80% RH, Non-condensing |
| Housing | |
| Case | Metal |
| Physical Properties | |
| Unit Weight | 2.2 lbs (R + T) |
| Case Qty | 5 |
| Case Weight | 11.2 lbs |
| Case Dimension | 20x 13.5x 9.2 in. |
| Unit Package Dimensions | 13x 4x 8.5 in. |
| Unit Weight with package | 2.1 lbs |
| Unit Dimension | 7.8x 3.1x 1 in. |
- The specification and pictures are subject to change without notice.
- All trademarks and logos are the properties of their respective holders.
