The VE882 is an Optical HDMI Extender that overcomes the length restriction of standard HDMI cables by using optical fiber to send high definition audio and video signals over large distances.
The VE882 accepts an audio-video stream from a local source and serializes the data to pass it over a single 3.125 Gbps optical link (for resolutions up to 1080p@60Hz at 24-bits).
The VE882 can also extend the IR remote control and transfer RS-232 (up to 115kbps) in both directions, allows you to connect serial devices such as touch screens and barcode scanners.
Feature :
- Extends the transmission range of HDMI, IR and RS-232 signals using one fiber optic cable
- Very long distance transmission – up to 600m
- HDMI (3D, Deep Color), HDCP compatible – signaling rates up to 3.125 Gbits
- Superior video quality – up to 1080p@60Hz
- Supports full frequency IR signal from 30KHz to 60KHz
- Uses one fiber optic cable to connect the local and remote units
- Supports wide screen formats
- Built-in 8KV/15KV ESD protection
- Features RS-232 serial port for connecting peripherals such as touch screens, barcode scanners, etc.
- Supports bi-directional IR signal transmission, one way at a time
- Rack-mountable
- Hot-pluggableNote: VE882 Support OM3 Multi-mode fiber
Diagram :
Specification :
| Function | VE882T | VE882R | ||
| Connectors | HDMI In | 1 x HDMI Type A Female (Black) | N/A | |
| HDMI Out | N/A | 1 x HDMI Type A Female (Black) | ||
| Optical In/Out | 1 x LC Simplex Connector (SFP) (Bi-directional) * | |||
| RS-232 | 1 x Terminal Block, 3 pole | |||
| IR | 1 x mini stereo jack (Black) | |||
| Power | 1 x DC Jack (Black) | |||
| Fiber Optics | Operating distance * | 600 m with single mode (SM) fiber | ||
| Wavelength | 1310/1550 nm for SM | |||
| Data rate | Single fiber: 1080p/60Hz (24-bits, 3.125G bps ) | |||
| LEDs | Power/Link | 1 (Green) | ||
| Power Consumption | DC5.3V, 5.6W | DC5.3V, 5.1W | ||
| Environment | Operating Temp. | 0–50°C | ||
| Storage Temp. | -20–60°C | |||
| Humidity | 0–80% RH, Non-condensing | |||
| Physical Properties |
Housing | Metal | ||
| Weight | 0.42 kg | 0.42 kg | ||
| Dimensions (L x W x H) |
14.69 x 10.30 x 3.00 cm | 14.69 x 10.30 x 3.00 cm | ||
* Note:
1. Operating distance is approximate. These are typical maximum distance that may vary depending on factors such as fiber type,fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
2. It is recommended that you use a Single Mode optical fiber cable that conforms to IEC 60793- 2-50 B1.1 or ITU-T G.652.B specifications.
- The specification and pictures are subject to change without notice.
- All trademarks and logos are the properties of their respective holders.
The VE814 carries an Ethernet pass-through port for Internet connectivity, making it easy for go online when necessary. It supports RS-232 and IR signaling pass-through, allowing you to control the HDMI source device from the remote unit (VE814R) while also granting access to the HDMI display device from the local unit (VE814T). The VE814 is HDMI (3D, Deep Color, 4kx2k) and HDCP compatible, ensuring superior video quality so that you get the most out of your HDMI displays.
The VE812 HDMI over Single Cat 5 Extender enables an HDMI display to be located up to 100 meters away from the source device. It can conveniently be extended using only one Cat 5e cable, which is cost-effective.
Specification :
The VE500R is the Cat5 Audio / Video a receiver, part of an ATEN A / V extension solution. The unit is designed to integrate into installations with ATEN’s VM0808T A / V matrix switch. It can also be used in conjunction with a VE500T transmitter as a point to point stand alone A / V extender to a maximum distance of 500 ft. To ensure the highest quality audio for the entire transmission length the VE500 employs balance audio for input and output. For added versatility, the VE500 also provides an RS232 connection to allow the use of serial touch screens or bar code readers.
Feature : 
Specification :