Author Archives: escomco

Oring IGR-20+ Industrial VPN Router with 2×10/100/1000Base-T(X)

Posted on by

Oring IGR-20+IGR-20 series is a reliable VPN router with 2 ports 10/100/1000Base-T(X) router where ETH1 for LAN and ETH2 for WAN. It supports 802.1X and MAC filter for security control. It could be configured to operate in 2 modes of routing function: Dynamic/Static IP route, PPPoE authentication. In addition, IGR-20+ also provides P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE P.D. specification. This feature extends the layout up to 100 meters. Therefore, IGR-20+ is one of the best solution for applications of VPN connection.

Feature :

  • High Speed Air Connectivity: WLAN interface support up to 300Mbps link speed
  • Provide 2 port 10/100/1000Base-T(X) port
  • Provide HNAT enhance LAN to WAN routing performance
  • Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
  • Secured Management by HTTPs
  • Various kind of WAN Connection Type supported: Dynamic/Static IP, PPPoE Dial Up
  • IP table to prevent access from unauthorized IP address
  • Support VPN for secured network connection (Open VPN , PPTP, IPSEC, VPN)
  • Support NAT Setting (Virtual Server , Port Trigger , DMZ , UPnP)
  • Versatile modes & event alarm by e-mail
  • 1KV isolation for PoE P.D. port (IGR-20+)
  • Event Warning by Syslog, Email, SNMP Trap, Relay and Beeper
  • Rigid IP-30 housing design
  • DIN-Rail and Wall-mount enabled

Specification :

IGR-20 IGR-20+
Physical Ports
10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX 2
P.O.E. PD port Present at ETH2
Fully compliant with IEEE 802.3af   Power
Device specifi cation
Over load & short circuit protection
Isolation Voltage : 1000 VDC min.
Isolation Resistance :10^8 ohms min
5-Pin Terminal Block 2(4xDI and 4xDO)
LED Indicators
Power Indicator 3 x LEDs, PWR1(2)(PoE) / Ready:
Red On : Power is on and booting up
Green On : Power is on and functioning Normal
10/100/1000T RJ45 Port Indicator 2 x LEDs,
LNK/ACT:Green for port Act.
Speed: Green for port Link at 1000Mbps
Amber for port Link at 100Mbps.
Off for port Link at 10Mbps
Fault 1 x LED, Red for Ethernet link down or power down indicator
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input Power Dual DC inputs. 12-48VDC on 6-pin terminal block
Power Consumption (Typ.) 4W 5W
Overload Current Protection Present
Reverse Polarity Protection Present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 74.3(W) x 109.2(D) x 153.6(H) mm (2.93 x 4.3 x 6.05 inch.)
Weight (g) 845g 850g
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 75°C (-40 to 167°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory approvals
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 5 years

Oring IGR-20 Industrial VPN Router with 2×10/100/1000Base-T(X)

Posted on by

Oring IGR-20IGR-20 series is a reliable VPN router with 2 ports 10/100/1000Base-T(X) router where ETH1 for LAN and ETH2 for WAN. It supports 802.1X and MAC filter for security control. It could be configured to operate in 2 modes of routing function: Dynamic/Static IP route, PPPoE authentication. In addition, IGR-20+ also provides P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE P.D. specification. This feature extends the layout up to 100 meters. Therefore, IGR-20+ is one of the best solution for applications of VPN connection.

Feature :

  • High Speed Air Connectivity: WLAN interface support up to 300Mbps link speed
  • Provide 2 port 10/100/1000Base-T(X) port
  • Provide HNAT enhance LAN to WAN routing performance
  • Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
  • Secured Management by HTTPs
  • Various kind of WAN Connection Type supported: Dynamic/Static IP, PPPoE Dial Up
  • IP table to prevent access from unauthorized IP address
  • Support VPN for secured network connection (Open VPN , PPTP, IPSEC, VPN)
  • Support NAT Setting (Virtual Server , Port Trigger , DMZ , UPnP)
  • Versatile modes & event alarm by e-mail
  • 1KV isolation for PoE P.D. port (IGR-20+)
  • Event Warning by Syslog, Email, SNMP Trap, Relay and Beeper
  • Rigid IP-30 housing design
  • DIN-Rail and Wall-mount enabled

Specification :

IGR-20 IGR-20+
Physical Ports
10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX 2
P.O.E. PD port Present at ETH2
Fully compliant with IEEE 802.3af   Power
Device specifi cation
Over load & short circuit protection
Isolation Voltage : 1000 VDC min.
Isolation Resistance :10^8 ohms min
5-Pin Terminal Block 2(4xDI and 4xDO)
LED Indicators
Power Indicator 3 x LEDs, PWR1(2)(PoE) / Ready:
Red On : Power is on and booting up
Green On : Power is on and functioning Normal
10/100/1000T RJ45 Port Indicator 2 x LEDs,
LNK/ACT:Green for port Act.
Speed: Green for port Link at 1000Mbps
Amber for port Link at 100Mbps.
Off for port Link at 10Mbps
Fault 1 x LED, Red for Ethernet link down or power down indicator
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input Power Dual DC inputs. 12-48VDC on 6-pin terminal block
Power Consumption (Typ.) 4W 5W
Overload Current Protection Present
Reverse Polarity Protection Present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 74.3(W) x 109.2(D) x 153.6(H) mm (2.93 x 4.3 x 6.05 inch.)
Weight (g) 845g 850g
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 75°C (-40 to 167°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory approvals
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 5 years

Oring IR-710 Industrial Cellular VPN router with 1×10/100Base-T(X), Cellular modem included

Posted on by

Oring IR-710IR-710 is a reliable and cost-effective industrial 3.5G router with 1 port 10/100Base-T(X) and 1 SIM card slot. Users can set up the network environment to fulfill demands of various applications rapidly by dialing up cellular modems. It supports HTTPS and IP filter for security control. Further, IR-710 can operate in a wide temperature range, -10~60°C. Therefore, IR-710 is one of the best solutions for applications of Internet communication.

Feature :

  • Provides 1 x 10/100Base-T(X) port and 1 SIM card slot
  • 3.5G HSDPA Modem dial up included
  • Supports VPN Setting (Open VPN, PPTP VPN)
  • IP table to prevent access from unauthorized IP address
  • Secured Management by HTTPS
  • Supports DHCP forwarding through PPTP function
  • Update DNS Hostname: DDNS
  • Versatile modes & event alarm by e-mail
  • Event Warning by Syslog, Email, SNMP Trap, Relay output
  • 12~48VDC power input on terminal block
  • Rigid IP-30 housing design
  • DIN-Rail and panel mounting enabled

Specification :

ORing Router Model IR-710
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 1
Sim Card Slot 1
Cellular Interface
Cellular Standard GSM / GPRS/ EGPRS/ EDGE / WCDMA / HSDPA / HSUPA
Band Option Dual-band : HSUPA 1900/2100 MHz

Quad-band : GSM/GPRS/EDGE 850/900/1800/1900 MHz

WCDMA/HSDPA 850/900/1900/2100 MHz
LED Indicators
Power Indicator Green On: Power is on
10/100Base-T(X) RJ45 Port Indicator Green for port Link/Act. Amber for 10/100Mbps
Status Indicator Green : System status indication
WAN Green on: Cellular modem is present

Green blinking: Cellular modem is transmitting data
Fault Indicator Amber On : WAN connection link down
Fault Contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input Power 12-48VDC power input on terminal block
Power Consumption (Typ.) 4.5W
Physical Characteristics
Enclosure IP-30
Dimensions (W x D x H) 41(W) x 70(D) x 95(H) mm (1.61 x 2.76 x 3.74 inch.)
Weight (g) 356g
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -10 to 60°C (-14 to 140°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Warranty 5 years

Oring IR-711UB Industrial Cellular VPN router with 1×10/100Base-T(X) and 1x USB 2.0 host

Posted on by

Oring IR-711UBIR-711UB is a reliable and cost-effective industrial 3.5G router with 1 port 10/100Base-T(X) and 1 port USB 2.0 host. It is designed to dial up different kinds of modems include traditional 56K modem and GPRSG/3G/3.5G modem with USB interface to connect to internet. Further, IR-711UB could operate in a wide temperature, -20~70°C. Therefore, IR-711UB is one of the best solutions for applications of mobile Internet communication.

Feature :

  • Provides 1 x 10/100Base-T(X) port and 1 port of USB 2.0 host
  • USB interface supports 3.5G HSDPA USB Modem dial-up
  • Supports VPN Setting (Open VPN, PPTP VPN)
  • IP table for preventing access from unauthorized IP address
  • Secured Management by HTTPS
  • Event Warning by Syslog and Relay output
  • 12~48VDC power input on terminal block
  • Rigid IP-30 housing design
  • DIN-Rail and wall mounting enabled

Specification :

ORing AP Router Model IR-711UB
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 1
USB Host port 1x USB 2.0 Host port
Technology
List USB modems and ISDN adapters which support the Communication Device Class Abstract Control Model interface
List of tested device :
Hummingbird huc56s (Conexant)
Huawei E220/E230
Simense HSDPA-180C
Prolific 2303 + serial modem
Quanta MUQ101
Sony Ericsson MD400/MD400g
Sierra C885
LED Indicators
Power Indicator Green On : Power is on
Ready Indicator Green : Transmission status
Fault Indicator Amber On : WAN connection link down
USB Indicator Green On : USB modem is present
10/100 Base-T(X) RJ45 Port Indicator Green Blinking : Ethernet port is transmitting data
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input power 12~ 48 VDC voltage power input at 4-pin terminal block
Power consumption (Typ.) 3.3W
Overload current protection Present
Reverse polarity protection Present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 26.1(W)x70(D)x95(H) mm (1.03×2.76×3.74 inches)
Weight (g) 190 g
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -20 to 70°C (-4 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory approvals
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 5 years

Oring IGAR-2062+-4G Industrial IEEE 802.11 a/b/g/n Dual 4G LTE Cellular Router with 2×10/100/1000Base-T(X)

Posted on by

Oring IGAR-2062+-4GIGAR-2062+-4G is a reliable IEEE 802.11 a/b/g/n WLAN VPN router with 2 ports 10/100/1000Base-T(X) router where ETH1 for LAN and ETH2 for WAN. It supports 802.1X and MAC filter for security control. It could be configured to operate in 3 modes of routing function: Dynamic/Static IP route, PPPoE authentication, and Modem dial up. In the mode of Modem dial up, it support GPRS/3G/3.5G/LTE modem by internal cellular module. Users can set up WLAN environment to fulfill demands of various applications rapidly by dual SIM dialing up cellular modems. In addition, IGAR-2062+-4G provides P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE P.D. specification. This feature extends the layout up to 100 meters. Therefore, IGAR-2062+-4G is one of the best solution for applications of wireless communication.

Feature :

  • High Speed Air Connectivity: WLAN interface support up to 300Mbps link speed
  • Provide 2 port 10/100/1000Base-T(X) port and 1 sim card slot
  • Support dual 4G LTE dial up backup and load blance
  • Provide HNAT enhance LAN to WAN routing performance
  • Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
  • Secured Management by HTTPs
  • Various kind of WAN Connection Type supported: Dynamic/Static IP, PPPoE, Modem/Dial Up
  • Support client operating mode
  • IP table to prevent access from unauthorized IP address
  • Support VPN for secured network connection (Open VPN , PPTP, IPSEC VPN)
  • Support NAT Setting (Virtual Server , Port Trigger , DMZ , UPnP)
  • 3G Modem signal information display (un-connecting status)
  • Wireless connecting status monitoring
  • Versatile modes & event alarm by e-mail
  • 1KV isolation for PoE P.D. port
  • Event Warning by Syslog, Email, SNMP Trap, Relay and Beeper
  • Rigid IP-30 housing design
  • DIN-Rail and Wall-mount enabled

Specification :

IGAR-2062+-4G
Physical Ports
10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX 2
P.O.E. PD port Present at ETH2
Fully compliant with IEEE 802.3af   Power
Device specifi cation
Over load & short circuit protection
Isolation Voltage : 1000 VDC min.
Isolation Resistance :10^8 ohms min
5-Pin Terminal Block 2(DI x 4 and DO x 4)
Sim Card Slot 2
Cellular Interface
Antenna Connector 2 x SMA Fermale
Cellualr Standard GSM / GPRS/ EGPRS/ EDGE / WCDMA / HSDPA / HSUPA /LTE
Band Option America(US)
LTE:
700/1700/2100/ MHz
UMTS/HSDPA/HSUPA/HSPA+/DC-HSPA+:
800/850/1900/2100 MHz
GSM/GPRS/EDGE:
850/900/1800/1900 MHz
Europe(EU)
LTE:
800/900/1800/2100/2600 MHz
UMTS/HSDPA/HSUPA/HSPA+/DC-HSPA+:
900/2100 MHz
GSM/GPRS/EDGE:
900/1800/1900 MHz
WLAN interface
Operating Mode AP/Bridge/Repeater/AP-Client
Antenna and connector 2 x Reverse SMA Female
Radio Frequency Type DSSS
Modulation IEEE802.11b: CCK, DQPSK, DBPSK
IEEE802.11a/g: OFDM with BPSK, QPSK, 16-QAM, 64-QAM
IEEE802.11n: OFDM with BPSK, QPSK, 16-QAM, 64-QAM
Frequency Band America / FCC:
2.412~2.462 GHz (11 channels )
5.180~5.240 GHz & 5.745~5.825 GHz ( 9 channels )
Europe CE / ETSI:
2.412~2.472 GHz ( 13 channels )
5.180~5.240 GHz ( 4 channels )
Transmission Rate IEEE802.11b: 1/ 2/ 5.5/ 11 Mbps
IEEE802.11a/g: 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 Mbps
IEEE802.11n:up to 300Mbps
Transmit Power 802.11a: 12dBm ± 1.5dBm@54Mbps
802.11b: 17dBm ± 1.5dBm@11Mbps
802.11g: 16dBm ± 1.5dBm@54Mbps
802.11gn HT20: 15dBm ± 1.5dBm @MCS7
802.11gn HT40: 14dBm ± 1.5dBm @MCS7
802.11an HT20: 12dBm ± 1.5dBm @MCS7
802.11an HT40: 11dBm ± 1.5dBm @MCS7
Receiver Sensitivity 802.11a : -76dBm ± 2dBm@54Mbps
802.11b : -85dBm ± 2dBm@11Mbps
802.11g : -76dBm ± 2dBm@54Mbps
802.11gn HT20:-75dBm ± 2dBm@MCS7
802.11gn HT40:-72dBm ± 2dBm@MCS7
802.11an HT20:-74dBm ± 2dBm@MCS7
802.11an HT40:-71dBm ± 2dBm@MCS7
Encryption Security WEP: (64-bit ,128-bit key)
WPA/WPA2 PSK :TKIP and AES encryption (802.11i)
802.1X/RADIUS Authentication supported
Wireless Security SSID broadcast disable
LED Indicators
Power Indicator 3 x LEDs, PWR1(2)(PoE) / Ready:
Red On : Power is on and booting up
Green On : Power is on and functioning Normal
10/100/1000T RJ45 Port Indicator 2 x LEDs,
LNK/ACT:Green for port Act.
Speed: Green for port Link at 1000Mbps
Amber for port Link at 100Mbps.
Off for port Link at 10Mbps
WLAN LEDs Green Solid On: RF on, Blink: data transmitting
Green for WLAN Strength: 1<25%, 2<50%, 3<75%, 4<100%
WAN LEDs 2 x LEDs, Green On : Power is on and functioning Normal
Fault 1 x LED, Red for Ethernet link down or power down indicator
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input Power Dual DC inputs. 12-48VDC on 6-pin terminal block
Power Consumption (Typ.) 15W
Overload Current Protection Present
Reverse Polarity Protection Present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 74.3(W) x 109.2(D) x 153.6(H) mm (2.93 x 4.3 x 6.05 inch.)
Weight (g) 1155
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -25 to 70°C (-13 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory approvals
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 5 years