1000Base-T(X), M12 connector

Posted on June 25, 2015 by escomco

ORing’s Transporter^TM series access point is designed for industrial and rolling stock wireless applications, such as vehicle, and railway applications. TGAP-620-M12 is a reliable 802.11 a/b/g/n WLAN Access Point with 2 Ethernet 10/100/1000 ports. It can be configured to operate in AP/Client /Bridge /AP-Client Mode. TGAP-620-M12 provides dual Ethernet ports in switch mode, so that you can use Daisy Chain to reduce the usage of Ethernet switch ports. TGAP-620-M12 provides a dust-tight connection and reverses SMA-type connectors that can install any reverse SMA-type antennas to extend communication distance. It is specifically designed for the toughest industrial environments. You are able to configure TGAP-620-M12 by WEB interface via LAN port or WLAN interface. TGAP-620-M12 can be easily adopted in almost all kinds of applications and provides the most rugged solutions for managing your network in outdoor. In addition, TGAP-620+-M12 also provides P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE P.D. specification. Therefore, TGAP-620-M12 is one of the best communication solutions for wireless applications.

Feature :

High Speed Air Connectivity: WLAN interface support up to 300 Mbps link speed
Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
Dual Gigabit Ethernet ports support Ethernet redundant mode (Recovery time < 10ms) and switch mode in M12 connector (A-coding)
Support X-Roaming < 60 ms
Support wireless load balance
Support Multiple-SSID to 4 SSID
Support external SMA antenna installation
Support AP/Client /Bridge /AP-Client Mode
Support MAC Filter
Dual Ethernet ports support Ethernet redundant mode (Recovery time < 10ms) and switch mode in M12 connector (A-coding)
Wireless connecting status monitoring
1KV isolation for PoE P.D. port for TGAP-620+-M12 • Secured Management by HTTPS
Event Warning by Syslog, Email, SNMP Trap, and Relay output
Rigid IP-40 housing design
Wall-mount enabled

Specification :

TGAP-620-M12	TGAP-620+-M12
Physical Ports
100/1000Base-T(X) Ports in M12 Auto MDI/MDIX (8-pin A-coding)	2	2 (Present at ETH2 Fully Compiant with IEEE 802.3af PoE P.D.)
DIDO port in M12 (A-Coding)	2(DI x 4 and DO x 4) Dry Contact: On: short to GND, off: open Wet Contact(DI to COM/GND): On: 0 to 3VDC, off: 10 to 30VDC
RS-232 Console port in M12 (5-pin A-coding)	115200, 8 ,N ,1
Antenna Connector	2
Relay port in M12 (5-pin A-coding)	1A@24VDC
WLAN interface
Operating Mode	AP/Bridge/Repeater/AP-Client
Antenna and connector	2 x Reverse SMA Female
Radio Frequency Type	DSSS
Modulation	IEEE802.11b: CCK, DQPSK, DBPSK IEEE802.11a/g: OFDM with BPSK, QPSK, 16-QAM, 64-QAM IEEE802.11n: OFDM with BPSK, QPSK, 16-QAM, 64-QAM
Frequency Band	America/FCC: 2.412~2.462 GHz (11 channels) 5.180~5.240 GHz & 5.745~5.825 GHz (9 channels) Europe CE/ETSI: 2.412~2.472 Ghz (13 channels) 5.180~5.240 GHz (4 channels)
Transmission Rate	IEEE802.11b: 1 / 2 / 5.5 / 11 Mbps IEEE802.11a/g: 6 / 9 / 12 / 18 / 24 / 36 / 48 / 54 Mbps IEEE801.11n: up to 300Mbps
Transmit Power	802.11a: 12dBm ± 1.5dBm 802.11b: 18dBm ± 1.5dBm 802.11g: 15dBm ± 1.5dBm 802.11gn HT20: 13dBm ± 1.5dBm@150Mbps 802.11gn HT40: 12dBm ± 1.5dBm@300Mbps 802.11an HT20: 12dBm ± 1.5dBm@150Mbps 802.11an HT40: 12dBm ± 1.5dBm@300Mbps
Receiver Sensitivity	802.11a: -68dBm ±2dBm@54Mbps 802.11b: -85dBm ±2dBm@11Mbps 802.11g: -68dBm ±2dBm@54Mbps 802.11gn HT20: -68dBm ±2dBm@150Mbps 802.11gn HT40: -68dBm ±2dBm@300Mbps 802.11an HT20: -68dBm ±2dBm@150Mbps 802.11an HT40: -68dBm ±2dBm@300Mbps
Encryption Security	WEP: (64-bit ,128-bit key supported) WPA/WPA2 :802.11i(WEP and AES encryption) WPAPSK (256-bit key pre-shared key supported) 802.1X Authentication supported TKIP encryption
Wireless Security	SSID broadcast disable and enable
Protocol Support
Protocol	ARP,BOOTP, DHCP, DNS, HTTP, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, STP, RSTP
LED Indicators
Power Indicator	2 x LEDs, Green for Power on
10/100/1000TX RJ45 Port Indicator	2 x LEDs, Green for port Link/Act
WLAN LED	1 x LED, Green for WLAN Link/Act
Fault	1 x LED, Red for Ethernet link down or power down indicator
Fault contact
Relay	Relay output to carry capacity of 1A at 24VDC(5-pin M12 A-coding)
Power
Redundant Input Power	Dual Power Inputs. 12~48 VDC
Power Consumption (Typ.)	7 Watts	7.5 Watts
Physical Characteristic
Enclosure	IP-40
Dimension (W x D x H)	125.6(W) x 65(D) x 196.1(H) mm (4.94 x 2.55 x 7.72 inch.)
Weight (g)	965 g	970 g
Environmental
Storage Temperature	-40 to 85°C (-40 to 185°F)
Operating Temperature	-25 to 70°C (-13 to 158°F)
Operating Humidity	5% to 95% Non-condensing
Regulatory approvals
EMI	FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
EMS	EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock	IEC60068-2-27, EN61373
Free Fall	IEC60068-2-31
Vibration	IEC60068-2-6, EN61373
Safety	EN60950-1
Warranty	5 years

Oring TGPS-9164GT-M12-BP2-24V 20-port managed Gigabit PoE Ethernet switch with 16×10/100/1000Base-T(X) P.S.E. and 4×10/100/1000Base-T(X), M12 connector and 2xbypass included

Posted on June 25, 2015 by escomco

ORing’s Transporter^TM series managed PoE Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications. TGPS-9164GT-M12 is managed Redundant Ring Ethernet switch with 16×10/100Base-T(X) P.S.E. and 4×10/100/1000Base-T(X) ports which is specifically designed for the toughest and fully compliant with EN50155 requirement. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection), Open-Ring, O-Chain, MRP and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. TGPS-9164GT-M12 also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each TGPS-9164GT-M12 switch has 16×10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. TGPS-9164GT-M12-BP2 includes 2 sets of bypass ports that protect the network from failures and Network maintenance by ensuring network integrity during power loss. And support wide operating temperature from -40 ^oC to 70 ^oC. TGPS-9164GT-M12 can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choices for EN50155 highly-managed Ethernet application.

Feature :

Leading EN50155-compliant Ethernet switch for rolling stock application
Support O-Ring (recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy
Open-Ring support the other vendor’s ring technology in open architecture
O-Chain allow multiple redundant network rings
Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function
Supports IEEE 802.3at compliant PoE and total power budget is 240Watts (-24V model) / 480Watts with maximum 30Watts per port
Support PoE scheduled configuration and PoE auto-ping check function
Support IEEE 1588v2 clock synchronization
Support IPV6 new internet protocol version
Support Modbus TCP protocol
Support IEEE 802.3az Energy-Efficient Ethernet technology
Provided HTTPS/SSH protocol to enhance network security
Support SMTP client
Support IP-based bandwidth management
Support application-based QoS management
Support Device Binding security function
Support DOS/DDOS auto prevention
IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
Support SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
Support ACL, TACACS+ and 802.1x User Authentication for security
Supports 9.6K Bytes Jumbo Frame
Multiple notification for warning of unexpected event
Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration
Support LLDP Protocol
Provided 2xRelay bypass function with four gigabit ports (-BP2 model)
Wall mounting enabled

Specification :

ORing Switch Model	TGPS-9164GT-M12	TGPS-9164GT-M12-24V	TGPS-9164GT-M12-BP2	TGPS-9164GT-M12-BP2-24V
Physical Ports
10/100/1000Base-T(X) with P.S.E. Ports in RJ45 Auto MDI/MDIX	16 (8-Pin A-coding)
10/100/1000Base-T(X) ports in M12 Auto MDI/MDIX	4 (8-Pin A-coding)		4 (8-pin A-coding with 2 x bypass function included)
Technology
Ethernet Standards	IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3ab for 1000Base-T IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol ) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1x for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) IEEE 802.3at PoE specification
MAC Table	8k
Processing	Store-and-Forward
Priority Queues	8
Switch Properties	Switching latency: 7 us Switching bandwidth: 40Gbps Max. Number of Available VLANs: 256 IGMP multicast groups: 128 for each VLAN Port rate limiting: User Define
Security Features	Device Binding security feature Enable/disable ports, MAC based port security Port based network access control (802.1x) VLAN (802.1Q ) to segregate and secure network traffic Radius centralized password management SNMPv3 encrypted authentication and access security Https / SSH enhance network security
Jumbo frame	Up to 9.6K Bytes
Software Features	STP/RSTP/MSTP (IEEE 802.1D/w/s) Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units TOS/Diffserv supported Quality of Service (802.1p) for real-time traffic VLAN (802.1Q) with VLAN tagging and GVRP supported IGMP Snooping IP-based bandwidth management Application-based QoS management DOS/DDOS auto prevention Port configuration, status, statistics, monitoring, security DHCP Server/Client/Relay SMTP Client Modbus TCP
Network Redundancy	O-Ring Open-Ring O-Chain MRP MSTP(RSTP/STP compatible)
RS-232 Serial Console Port	RS-232 in 5-pin M12 connector with console cable. 115200bps, 8, N, 1
LED Indicators
Power Indicator	Green : Power LED x 2
Ring Master Indicator (R.M.)	Green : Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator (Ring)	Green : Indicates that the system operating in O-Ring mode Green Blinking : Indicates that the Ring is broken.
Fault Indicator (Fault)	Amber : Indicate unexpected event occurred
10/100/1000Base-T(X) M12 P.S.E.	Top Green LED for port Link/Act indicator.
10/100/1000Base-T(X) M12 Port Indicator	Top Green LED for Link/Act indicator Bottom dual color LED for Ethernet speed indicator : Green LED for 1000Mbps, Amber for 100Mbps
PoE Indicator	Middle Green LED for PoE enable indicator Bottom dual color LED for Ethernet speed indicator : Green LED for 1000Mbps, Amber for 100Mbps
Fault contact
Relay	Relay output to carry capacity of 3A at 24VDC on M12 connector (A-coding)
Power
Redundant Input power	Dual DC inputs. 50~57VDC on 5-pin M23 connector	Dual DC inputs. 24 (12~57VDC) VDC on 5-pin M23 connector	Dual DC inputs. 50~57VDC on 5-pin M23 connector	Dual DC inputs. 24 (12~57VDC) VDC on 5-pin M23 connector
Total PoE Output Power	480 Watts	120 Watts (12~24VDC) / 240 Watts (24~57VDC)	480 Watts	120 Watts (12~24VDC) / 240 Watts (24~57VDC)
Power Consumption (Type.)	20 Watts (power consumption of P.S.E. is not included)	25 Watts (power consumption of P.S.E. is not included)	20 Watts (power consumption of P.S.E. is not included)	25 Watts (power consumption of P.S.E. is not included)
Overload current protection	Present
Reverse Polarity Protection	Not Present
Physical Characteristic
Enclosure	IP-30
Dimension (W x D x H)	260 (W) x 91.3 (D) x216 (H) mm
Weight (g)	2528 g	2553 g	2550 g	2575 g
Environmental
Storage Temperature	-40 to 85°C (-40 to 185°F)
Operating Temperature	-40 to 70°C (-40 to 158°F)
Operating Humidity	5% to 95% Non-condensing
Regulatory approvals
EMI	FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
EMS	EN61000-4-2 (ESD) EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock	IEC60068-2-27
Free Fall	IEC60068-2-31
Vibration	IEC60068-2-6
Safety	EN60950-1
Warranty	5 years

Oring TGPS-9164GT-M12-BP2 20-port managed Gigabit PoE Ethernet switch with 16×10/100/1000Base-T(X) P.S.E. and 4×10/100/1000Base-T(X), M12 connector and 2xbypass included

Posted on June 25, 2015 by escomco

Feature :

Leading EN50155-compliant Ethernet switch for rolling stock application
Support O-Ring (recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy
Open-Ring support the other vendor’s ring technology in open architecture
O-Chain allow multiple redundant network rings
Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function
Supports IEEE 802.3at compliant PoE and total power budget is 240Watts (-24V model) / 480Watts with maximum 30Watts per port
Support PoE scheduled configuration and PoE auto-ping check function
Support IEEE 1588v2 clock synchronization
Support IPV6 new internet protocol version
Support Modbus TCP protocol
Support IEEE 802.3az Energy-Efficient Ethernet technology
Provided HTTPS/SSH protocol to enhance network security
Support SMTP client
Support IP-based bandwidth management
Support application-based QoS management
Support Device Binding security function
Support DOS/DDOS auto prevention
IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
Support SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
Support ACL, TACACS+ and 802.1x User Authentication for security
Supports 9.6K Bytes Jumbo Frame
Multiple notification for warning of unexpected event
Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration
Support LLDP Protocol
Provided 2xRelay bypass function with four gigabit ports (-BP2 model)
Wall mounting enabled

Specification :

ORing Switch Model	TGPS-9164GT-M12	TGPS-9164GT-M12-24V	TGPS-9164GT-M12-BP2	TGPS-9164GT-M12-BP2-24V
Physical Ports
10/100/1000Base-T(X) with P.S.E. Ports in RJ45 Auto MDI/MDIX	16 (8-Pin A-coding)
10/100/1000Base-T(X) ports in M12 Auto MDI/MDIX	4 (8-Pin A-coding)		4 (8-pin A-coding with 2 x bypass function included)
Technology
Ethernet Standards	IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3ab for 1000Base-T IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol ) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1x for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) IEEE 802.3at PoE specification
MAC Table	8k
Processing	Store-and-Forward
Priority Queues	8
Switch Properties	Switching latency: 7 us Switching bandwidth: 40Gbps Max. Number of Available VLANs: 256 IGMP multicast groups: 128 for each VLAN Port rate limiting: User Define
Security Features	Device Binding security feature Enable/disable ports, MAC based port security Port based network access control (802.1x) VLAN (802.1Q ) to segregate and secure network traffic Radius centralized password management SNMPv3 encrypted authentication and access security Https / SSH enhance network security
Jumbo frame	Up to 9.6K Bytes
Software Features	STP/RSTP/MSTP (IEEE 802.1D/w/s) Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units TOS/Diffserv supported Quality of Service (802.1p) for real-time traffic VLAN (802.1Q) with VLAN tagging and GVRP supported IGMP Snooping IP-based bandwidth management Application-based QoS management DOS/DDOS auto prevention Port configuration, status, statistics, monitoring, security DHCP Server/Client/Relay SMTP Client Modbus TCP
Network Redundancy	O-Ring Open-Ring O-Chain MRP MSTP(RSTP/STP compatible)
RS-232 Serial Console Port	RS-232 in 5-pin M12 connector with console cable. 115200bps, 8, N, 1
LED Indicators
Power Indicator	Green : Power LED x 2
Ring Master Indicator (R.M.)	Green : Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator (Ring)	Green : Indicates that the system operating in O-Ring mode Green Blinking : Indicates that the Ring is broken.
Fault Indicator (Fault)	Amber : Indicate unexpected event occurred
10/100/1000Base-T(X) M12 P.S.E.	Top Green LED for port Link/Act indicator.
10/100/1000Base-T(X) M12 Port Indicator	Top Green LED for Link/Act indicator Bottom dual color LED for Ethernet speed indicator : Green LED for 1000Mbps, Amber for 100Mbps
PoE Indicator	Middle Green LED for PoE enable indicator Bottom dual color LED for Ethernet speed indicator : Green LED for 1000Mbps, Amber for 100Mbps
Fault contact
Relay	Relay output to carry capacity of 3A at 24VDC on M12 connector (A-coding)
Power
Redundant Input power	Dual DC inputs. 50~57VDC on 5-pin M23 connector	Dual DC inputs. 24 (12~57VDC) VDC on 5-pin M23 connector	Dual DC inputs. 50~57VDC on 5-pin M23 connector	Dual DC inputs. 24 (12~57VDC) VDC on 5-pin M23 connector
Total PoE Output Power	480 Watts	120 Watts (12~24VDC) / 240 Watts (24~57VDC)	480 Watts	120 Watts (12~24VDC) / 240 Watts (24~57VDC)
Power Consumption (Type.)	20 Watts (power consumption of P.S.E. is not included)	25 Watts (power consumption of P.S.E. is not included)	20 Watts (power consumption of P.S.E. is not included)	25 Watts (power consumption of P.S.E. is not included)
Overload current protection	Present
Reverse Polarity Protection	Not Present
Physical Characteristic
Enclosure	IP-30
Dimension (W x D x H)	260 (W) x 91.3 (D) x216 (H) mm
Weight (g)	2528 g	2553 g	2550 g	2575 g
Environmental
Storage Temperature	-40 to 85°C (-40 to 185°F)
Operating Temperature	-40 to 70°C (-40 to 158°F)
Operating Humidity	5% to 95% Non-condensing
Regulatory approvals
EMI	FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
EMS	EN61000-4-2 (ESD) EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock	IEC60068-2-27
Free Fall	IEC60068-2-31
Vibration	IEC60068-2-6
Safety	EN60950-1
Warranty	5 years

Oring IMG-111-2G Industrial M2M Gateway with 1×10/100Base-T(X) & 1xRS-232

Posted on June 24, 2015 by escomco

IMG-111-2G is an innovative 1 port RS232 VPN Gateway with 1 port 10/100Base-T(X) port. It could be configured to connect to the internet by dialing up 2G/3.5G cellular modem to fulfill demands of various applications rapidly a. In addition, IMG-111 can also transfer data into 5 host PCs simultaneously for backup purposes. Therefore, IMG-111 is one of the best solutions for applications of wireless and serial communication.

Feature :

Provide 1 x 10 / 100 Base –T(X) port and SIM card slot
2G or 3.5G HSUDPA modem included
Support Open VPN, PPTP VPN
Support DHCP forwarding through PPTP function.
Update DNS Hostname: DDNS
Versatile modes & event alarm by e-mail
Event warning by Syslog, Email, SNMP Trap, Relay output
5 host devices: Virtual COM, TCP Server, TCP Client mode; UDP, 4 IP Ranges: UDP
Redundant multiple host devices: 5 host devices: Virtual COM, TCP Server, TCP Client mode;UDP 4 IP Ranges: UDP
12~48VDC power input on terminal block
Rigid IP-30 housing design
Din-Rail and panel mounting enabled.

Specification :

ORing M2M Gateway Model	IMG-111-2G
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX	1
Sim Card Slot	1
Cellular Interface
Cellular Standard	GSM / GPRS / EGPRS / EDGE
Band Option	Dual-band (Qual-band) GSM/GPRS 900/1800MHz or 900MHz/1800MHz/850MHz/1900MHz
Antenna Connector	Reverse SMA
Antenna	GSM/DCS/UMT 3G antenna x1
Serial Ports
Connector	DB9 Male x 1
Operation Mode	RS-232
Serial Baud Rate	110 bps to 115.2 Kbps
Data Bits	5, 6, 7, 8
Parity	odd, even, none, mark, space
Stop Bits	1, 1.5, 2
Serial signals	RS-232 :TxD, RxD, GND
LED Indicators
Power Indicator	Green On: Power is on and functioning Normally.
Status indicator	Green : System status indicator
Fault indicator	Amber on : WAN connection link down
WAN	Green on : 3.5G dial up Green blinking : 3.5G disconnect
Serial TX/RX LED	Red : Receiving data Green : Transmitting data
10/100TX RJ45 port indicator	Green for port Link/Act.
Fault Contact
Relay	Relay output to carry capacity of 1A at 24VDC
Power
Input Power	12-48VDC power input on terminal block
Power Consumption (Typ.)	4.5W
Physical Characteristics
Enclosure	IP-30
Dimensions (W x D x H)	41(W) x 70(D) x 95(H) mm (1.61 x 2.76 x 3.74 inch.)
Weight (g)	360g
Environmental
Storage Temperature	-40 to 85°C (-40 to 185°F)
Operating Temperature	-10 to 60°C (-14 to 140°F)
Operating Humidity	5% to 95% Non-condensing
Regulatory Approvals
EMI	FCC Part 15, CISPR (EN55022) class A
EMS	EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Warranty	3 years

Oring IMG-111 Industrial M2M Gateway with 1×10/100Base-T(X) & 1xRS-232

Posted on June 24, 2015 by escomco

IMG-111 is an innovative 1 port RS232 M2M VPN Gateway with 1 port 10/100Base-T(X) port. It could be configured to connect to the internet by dialing up 3.5G cellular modem to fulfill demands of various applications rapidly a. In addition, IMG-111 can also transfer data into 5 host PCs simultaneously for backup purposes. Therefore, IMG-111 is one of the best solutions for applications of wireless and serial communication.

Feature :

Provide 1 x 10 / 100 Base –T(X) port and SIM card slot
3.5G HSUDPA modem included
Support Open VPN, PPTP VPN
Support DHCP forwarding through PPTP function.
Update DNS Hostname: DDNS
Event warning by Syslog and Relay output
Redundant multiple host devices: 5 host devices: Virtual COM, TCP Server, TCP Client mode;UDP 4 IP Ranges: UDP
12~48VDC power input on terminal block
Rigid IP-30 housing design
Din-Rail and panel mounting enabled.

Specification :

ORing M2M Gateway Model	IMG-111
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX	1
Sim Card Slot	1
Cellular Interface
Cellular Standard	GSM / GPRS/ EGPRS/ EDGE / WCDMA / HSDPA / HSUPA
Band Option	Dual-band : HSUPA 1900/2100 MHz Quad-band : GSM/GPRS/EDGE 850/900/1800/1900 MHz WCDMA/HSDPA 850/900/1900/2100 MHz
Antenna Connector	Reverse SMA
Antenna	GSM/DCS/UMT 3G antenna x1
Serial Ports
Connector	DB9 Male x 1
Operation Mode	RS-232
Serial Baud Rate	110 bps to 115.2 Kbps
Data Bits	5, 6, 7, 8
Parity	odd, even, none, mark, space
Stop Bits	1, 1.5, 2
Serial signals	RS-232 :TxD, RxD, GND
LED Indicators
Power Indicator	Green On: Power is on and functioning Normally.
Status indicator	Green : System status indicator
Fault indicator	Amber on : WAN connection link down
WAN	Green on : 3.5G dial up Green blinking : 3.5G disconnect
Serial TX/RX LED	Red : Receiving data Green : Transmitting data
10/100TX RJ45 port indicator	Green for port Link/Act.
Fault Contact
Relay	Relay output to carry capacity of 1A at 24VDC
Power
Input Power	12-48VDC power input on terminal block
Power Consumption (Typ.)	4.5W
Physical Characteristics
Enclosure	IP-30
Dimensions (W x D x H)	41(W) x 70(D) x 95(H) mm (1.61 x 2.76 x 3.74 inch.)
Weight (g)	360g
Environmental
Storage Temperature	-40 to 85°C (-40 to 185°F)
Operating Temperature	-10 to 60°C (-14 to 140°F)
Operating Humidity	5% to 95% Non-condensing
Regulatory Approvals
EMI	FCC Part 15, CISPR (EN55022) class A
EMS	EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Warranty	3 years