IDS-M311 is an innovative 1-port Modbus Gateway which converts between Modbus TCP and Modbus RTU/ASCII. IDS-M311 is mainly designed for easy integration of Modbus RTU/ASCII devices and network based Modbus TCP devices without changing currently existed structure. While IDS-M311 is able to support up to 31 RTU/ASCII devices in its serial port, thus this model can effectively connect a high density of Modbus nodes to the same network. In addition, the Web Configuration Interface could configure multiple devices and set up IDS-M311 operation mode for different application requirement. IDS-M311 allows user to select from master or slave mode for user to access Ethernet slave devices or Serial slave devices.
IDS-M311 supports RS-232/422/485 and provides dual redundant power inputs, 12~48 VDC, on DC power jack and terminal block to guarantee a non-stop operation. With wide operating temperature, -10~60oC, and rugged IP-30 housing design, IDS-M311 could operate in the harsh industrial environment. Therefore, IDS-M311 is the best solution to the high demand of secure serial to Ethernet critical data communication.
Feature :
- Operating Modes: RTU Master, RTU Slave, ASCII Master, ASCII Slave
- Supports up to 16 TCP connections and 32 requests simultaneously
- Convert between Modbus TCP and Modbus RTU/ASCII
- Provides 1xRS-232/422/485 software selectable serial communication
- Internet Communication: PPPoE
- Update DNS Hostname: DDNS
- Event Warning by Syslog, Email, SNMP trap, and Beeper
- Dual DC power inputs
- Configurable by Web Interface
- Various Windows O.S. supported: Windows NT/2000/ XP/ 2003/VISTA(32/64bit)/ Windows 7(32/64bit)
- DIN-rail and Wall mount enabled
Specification :
| ORing Device Server Model | IDS-M311 |
| Physical Ports | |
| 10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX | 1 |
| Serial Ports | |
| Connector | DB9(male) x 1 |
| Operation Mode | RS232 / RS422 / 4(2)-Wire RS485. Which can be configured by Web interface |
| Serial Baud Rate | 110bps to 460.8kbps |
| Data Bit | 5, 6, 7, 8 |
| Stop Bit | 1, 1.5, 2 |
| Parity | odd, even, none, mark, space |
| RS-232 | TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND |
| RS-422 | Tx+,Tx-, Rx+, Rx-,GND |
| RS-485(4-Wire) | Tx+,Tx-, Rx+, Rx-,GND |
| RS-482(2-wire) | Data+, Data-,GND |
| Flow Control | XON/XOFF, RTS/CTS, DTR/DSR |
| Network Features | |
| Network Protocols | ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP, PPPoE, DDNS |
| LED Indicators | |
| Power Indicator | PWR 1(2) / Ready: Red On : Power is on and booting up. Red Blinking : Indicates an IP conflict, or DHCP or BOOTP server did not respond properly. Green On : Power is on and functioning Normally. Green Blinking : Located by Administrator. |
| 10/100Base-T(X) RJ45 Port Indicator | Green for port Link/Act at 100Mbps. Amber for port Link/Act at 10Mbps. |
| Serial TX / RX LEDs | Red : Serial port is receiving data Green : Serial port is transmitting data |
| Power | |
| Redundant Input Power | Dual DC inputs. 12-48VDC on 3-pin terminal block and power jack |
| Power Consumption (Typ.) | 4 watts |
| Overload Current Protection | Present |
| Reverse Polarity Protection | Present on terminal block |
| Physical Characteristics | |
| Enclosure | IP-30 |
| Dimensions (W x D x H) | 72(W)x29.4(D)x123.4(H) mm (2.83×1.16×4.86 inch.) |
| Weight (g) | 294 g |
| Environmental | |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Operating Temperature | -10 to 60°C (14 to 140°F) |
| Operating Humidity | 5% to 95% Non-condensin |
| Regulatory Approvals | |
| EMI | FCC Part 15, CISPR (EN55022) class A, |
| EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950-1 |
| Warranty | 5 years |
