Ruckus ZoneFlex R300

by | Apr 12, 2014 | Indoor Access Point

The Industry’s Best-in-Class Performance at Lowest Cost

ZoneFlex R300

The next generation Ruckus ZoneFlex™ R300 is an entry level 802.11n 2×2:2 dual-band 2.4GHz and 5GHz concurrent access points designed for bandwidth hungry and latency sensitive applications such as Voice and Video over Wi-Fi. These APs boast Ruckus patented adaptive antennas deliver BeamFlex. This technology works in conjunction with Ruckus’ advanced channel optimization to provide industry-leading wireless performance. Unlike any other 802.11n wireless solution in its class, the ZoneFlex R300 combines patented adaptive antenna technology and automatic interference mitigation to deliver consistent, predictable performance at extended ranges with up to an additional 4dB of BeamFlex gain on top of the physical antenna gain and up to 10dB of interference mitigation.

Feature :

Best-in-class performance for price

  • Two-stream MIMO 2×2:2
  • ZoneFlex R300 – Concurrent dual-band support
  • 128 unique antenna patterns (64 per band)
  • Up to 4dB of signal-to-interference and noise (SINR) improvement and up to 10dB of interference mitigation
  • BeamFlex and Transmit beamforming capable
  • Capable of supporting over 250 clients per R300 AP
  • Novel channel selection approach (ChannelFly) delivering up to 50 percent capacity gain over alternative background scanning approaches

Adaptive antennas and automatic interference mitigation

  • Up to 4 times extended range and coverage
  • Automatic interference mitigation
  • BeamFlex combines adaptive antennas and transmit beamforming

Concurrent support for HD IPTV, VoIP and data

  • Support for isochronous, multicast IP video streaming
  • Four queues per client station

Differentiated services with multiple SSIDs

  • 27 BSSIDs with unique QoS and security policies
  • WPA-PSK (AES), 802.1X support
  • Zero-IT and Dynamic PSK
  • Captive portal and guest accounts
  • RADIUS and Active Directory support

Diagram :

Diagram ZoneFlex R300 2Diagram ZoneFlex R300

Specification :

Power
  • DC Input: 12 VDC 1.0A
  • Power over Ethernet 802.3 af
Physical Size
  • 13cm (L), 13cm (W), 2.8cm (H)
  • 5.1 in (L), 5.1 in (W), 1.1 in (H)
Weight
  • 397 grams (0.875 lbs.)
Ethernet Ports
  • 1 auto MDX, auto-sensing 10/100/1000 Mbps, RJ-45, POE port
Lock Options
  • Hidden latching mechanism
  • Kensington Lock Hole
  • T-bar Torx
Environmental Conditions
  • Operating Temperature: 0°C – 40°C
  • Operating Humidity: 10% – 95% non-condensing
Power Draw
  • DC Input
  • Idle: 1.6W
  • Typical: 3.6W
  • Peak: 8.4W
  • Power over Ethernet Input
  • Idle: 3.4W
  • Typical: 5.3W
  • Peak: 9.7W
Performance and Capacity
UDP Throughput
  • 225 Mbps (HT40) / 120Mbps (HT20)
Concurrent Stations
  • Up to 256 clients per AP
Simultaneous VoIP Clients
  • Up to 30
RF
Antenna
  • Adaptive antenna that provides up
  • to 128 unique antenna patterns
  • 64 patterns per band
RF Power Output (Aggregated)
  • 26 dBm for 2.4GHz†
  • 24 dBm for 5GHz†
Physical Antenna Gain
  • Up to 3 dBi per spatial stream
Beamflex* SINR TX Gain
  • Up to 4 dB
Interference Mitigation
  • Up to 10 dB
Minimum RX Sensitivity
  • Up to -101 dBm
Management
Deployment Options
  • Standalone (individually managed)
  • Managed by ZoneDirector
  • Managed by FlexMaster
  • Managed by SmartCell™ Gateway 200
Configuration
  • Web User Interface (HTTP/S)
  • CLI (Telnet/SSH), SNMP v1, 2, 3
  • TR-069 vis FlexMaster
Auto AP Software Updates
  • FTP or TFTP, remote auto available
Wi-Fi
Standards
  • IEEE 802.11a/b/g/n
  • 2.4GHz and 5GHz
Supported Data Rates
  • 802.11n: 6.5Mbps – 130Mbps (20MHz) 6.5Mbps – 300Mbps (40MHz)
  • 802.11a: 54, 48, 36, 24, 18, 12, 9 and 6Mbps
  • 802.11b: 11, 5.5, 2 and 1 Mbps
  • 802.11g: 54, 48, 36, 24, 18, 12, 9 and 6 Mbps
Radio Chains
  • 2 x 2
Spatial Streams
  • 2
Channelization
  • 20MHz and/or 40MHz
Frequency Band
  • IEEE 802.11 b/g/n: 2.4 – 2.484 GHz
  • IEEE 802.11a/n: 5.15 – 5.25 GHz; 5.25 – 5.35 GHz; 5.47 – 5.725 GHz; 5.725 – 5.85 GHz
Operating Channels
  • US/Canada: 1-11, Europe ( ETSI X30): 1-13, Japan X41: 1-13
  • 5 GHz channels: Country dependent
BSSID
  • Up to 27 user configurable
Power Save
  • Supported
Wireless Security
  • WPA-PSK, WPA-TKIP, WPA2 AES, 802.11i
  • Authentication via 802.1X with the ZoneDirector, local authentication database, support for RADIUS, LDAP, and ActiveDirectory
Certifications**
  • U.S., Europe, Australia, Brazil, Canada, Chile, China, Colombia, Costa Rica, Hong Kong, India, Indonesia, Israel, Japan, Korea, Malaysia, Mexico, New Zealand, Peru, Philippines, Saudi Arabia, Singapore, South Africa, Taiwan, Thailand, UAE, Vietnam
  • WEEE/RoHS compliance
  • EN-60601-1-2 (Medical)
  • Wi-Fi Alliance
  • WFA planned
  • † Maximum power varies by country
  • ** For current certification status please see price list

Related Posts