TRENDnet’s Single Channel Analog to IP Video Encoder, model TV-VS1, provides advanced IP-based security camera functionality to a traditional analog CCTV camera. Convert analog video to digital; view video over any internet connection; record video to a server; and manage motion detection recording and email alerts.
The TV-VS1 converts analog video to resolutions of up to 704 x 480 pixels (4CIF) at 30 frames per second for H.264, MPEG-4, or MJPEG compressed video. Two-way audio support facilitates audio recording and two-way communications. Remote Pan/Tilt/Zoom and Auto Patrol is supported for Pelco D compliant PTZ cameras. Advanced features include motion detection recording, email alerts, scheduled recording sessions, 3GPP support, Samba client support, Input/Output ports to network to alarm systems, date-and-time and other text overlays, mask overlays to conceal sensitive areas, an SD card slot, and digital zoom. This compact device can be mounted on most surfaces.
- Advanced IP-based functionality for an analog CCTV security camera
- View a CCTV camera from any Internet connection and on compatible mobile phones
- Motion detection recording, email alerts, and alarm triggers
- Schedule recording sessions to a server with Samba client support
Feature :
- 1 x 10/100Mbps Auto-MDIX RJ-45 port
- SD/SDHC card slot *
- BNC video out and video in connectors
- Audio support : built-in Audio jacks for additional 3rd party microphone and speaker
- Input/Output ports (GPIO) to network to alarm systems
- Diagnostic Power and Link LEDs
- Four installation mounting points
- 3x digital zoom
- Pelco D and Pelco P pan/tilt/zoom support: Define Auto-Patrol pan tilt with up to 32 viewing nodes
- High quality H.264, MPEG-4, and MJPEG video recording
- Resolution up to 704 x 576 pixels and up to 30 frames per second (fps)
- Stream Network camera video to a 3GPP compatible wireless device
- Dynamic DNS support
- Images controls: brightness, saturation, contrast, Hue ,and Wide Dynamic Range Correction (WDRC)
- Time, date, and other text overlays
- Mask overlays conceal sensitive areas
- Supports TCP/IP networking, SMTP Email, HTTP, and other Internet protocols
- Recording type: continuous, schedule, or motion detection
- Record streaming video to your computer or Network Storage device with Samba support
- Three motion detection windows with just-in-time snapshot , motion detection triggered email alerts, and image upload to FTP
- Event trigger: motion detection or Input/Output signal
- Event response: email alert, instant snapshot, or video recording
- Send instant messages to Jabber client via Jabber Server
- Supports Quality of Service (QoS) with Differentiated Services Code Point (DSCP)
- Quick Universal Plug and Play (UPnP) installation
- 3-year limited warranty
Diagram :
Specification :
General
- Video
- Video In: CVBS / 1 Vp-p±0.2 / 75 Ohms ; BNC connecter
- Video Out: CVBS /1 Vp-p /75 Ohms; BNC connecter
- Audio
- Line In: 3.5mm jack ( CCTV audio)
- Line Out: 3.5mm jack (Speaker)
- S/N Ratio: < 60dB
- Codec: PCM/AMR
- 2 Way audio supported
- GPIO
- Ground, GPIO in/out, DV12V output, RS485 TX+/TX-
- SD Slot
- Supports SD/SDHC (up to 32GB)
- Pan/Tilt/Zoom
- Protocol: Pelco D, Pelco P
- 32 presets
- Auto Patrol
Hardware
- Network
- IEEE 802.3u 10/100Mbps Fast Ethernet, Auto-MDIX
- LED
- Power, Link
- Reset Button
- Push and release to reboot
- Push and hold for 5 seconds to restore to factory default
- Power Consumption
- 7 Watts
- Power
- 12V, 1.5A external power adapter
- Dimension
- 160 x 109 x 36 mm (6.3 x 4.3 x 1.4 in.)
- Weight
- 430 g (15.2 oz.)
- Temperature
- Operating: 0°C ~ 45°C (32°F ~ 113°F)
- Storage: -15°C ~ 60°C (5°F ~ 140°F)
- Humidity
- Max. 85% (non-condensing)
- Certifications
- CE, FCC
Requirement
- Management Interface
- Internet Explorer 6.0 or above
- To run Utility
- Windows 7(32/64-bit), Vista(32/64-bit), XP(32/64-bit)
- Network Protocols
- TCP/IP, IPv4/IPv6, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, HTTP, HTTPs, Samba, PPPoE, UPnP, Bonjour, RTP, RTSP, RTCP
Management
- Remote
- Remote management supported
- Backup / Restore
- Save/retrieve configuration files
Settings
- Image
- Brightness, contrast, saturation, Hue, WDRC (Wide Dynamic Range Correction)
- Video Encoder
- Encoding type: H.264, MPEG4, MJPEG
- Resolution/Frame rate(auto-sensing)704 x 480, 352 x 240, 176 x 120, up to 30 fps (NTSC)
- 704 x 576, 352 x 288, 176 x 144, up to 25 fps (PAL)
- Compression: 5 levels
- Recording
- Recording type: continuous, schedule, or motion detection
- Port Settings
- HTTP port: 80 (default), RTSP (554)
- Digital Zoom
- 3x
- Dynamic DNS
- Yes
- Time
- Synchronize with NTP server or set time/date manually
- SMTP
- Supported up to 2 destination email accounts
- System Log
- 100 entries
