Oring TGS-1080-M12-BP2 EN50155 8-port unmanaged Gigabit Ethernet switch with 8×10/100/1000Base-T(X), M12 connector and 2xbypass included

by | May 5, 2015 | Industrial Ethernet Switch, ORing

Oring TGS-1080-M12-BP2ORing’s TransporterTM series un-managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications.  The TGS-1080-M12-BP2 is an un-managed Ethernet switch with 8×10/100/1000Base-T(X) which is specifically designed for the toughest and fully compliant with EN50155 requirement. Each TGS-1080-M12-BP2 switch has 8X10/100/1000Base-T(X) ports. TGS-1080-M12-BP2 EN50155 Ethernet switch uses M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. TGS-1080-M12-BP2 includes 2 sets of bypass ports that protect the network from failures and Network maintenance by ensuring network integrity during power loss. In addition, the wide operating temperature range from -40 oC to 70oC can satisfy most of operating environment.  Therefore, the switch is one of the most reliable choices for rolling stock application.

Feature :

  • Leading EN50155-compliant Ethernet switch for rolling stock application
  • Provide 8×10/100/1000Base-T(X) ports
  • Support dual power inputs for power redundancy
  • Built-in 2 sets of bypass ports
  • Support auto-negotiation and auto-MDI/MDI-X
  • Support store and forward transmission
  • Support flow control
  • M12 connectors to guarantee reliable operation against environmental disturbances
  • Rigid IP-40 housing design
  • Wall mounting enabled

Specification :

ORing Switch Model

TGS-1080-M12-BP2
Physical Ports
10/100/1000Base-T(X) Ports in M12 With P.S.E.  8 x M12 connector (8-pin A-coding, Bypass function included by last 4 ports)
Technology
Ethernet Standards IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
MAC Table 8K MAC addresses
Processing Store-and-Forward
LED Indicator
Power Indicator Green : Power LED x 3
Fault indicator Amber : Indicate PWR1 or PWR2 failure
10/100/1000Base-T(X) RJ45 port indicator and PoE indicator Top Green for port Link/Act indicator
Middle Amber for Duplex / Collision indicator
Bottom Blue for PoE Injected indicator
Fault Contact
Relay Relay output to carry capacity of 3A at 24VDC on M12 connector (5-pin A-coding)
Power
Redundant Input power Dual DC inputs. 12 ~ 48VDC on 5-pin M23 connector
Power Consumption (Typ.) 6.24 Watts (power consumption of P.S.E. is not included)
Overload Current Protection Present
Reverse Polarity Protection NOT Present
Physical Characteristic
Enclosure IP-40
Dimension (W x D x H) 125 (W) x 65 (D) x 196 (H) mm
Weight (g) 1007 g
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory approvals
EMI FCC FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-31
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 5 years

Related Posts