Oring INJ-102GT++-24VThe INJ-102GT++ PoE Injector series is not only an IEEE802.3at compliant device but also an advanced high power PoE injector. It is intelligent detection that provided 2-ports 10/100/1000Base-T (X) PoE outputs.  The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable.  This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable.  Therefore, only an IEEE 802.3at/802.3af compliant device can be powered with the INJ-102GT++ PoE Injector.  Typically in Gigabit networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards.  Because of its 24~57VDC power input with boosting circuit, the total output power can be up to 180Watts[Note2] for all ports usage. The installer doesn’t need to worry about voltage drops caused by cable length.  The INJ-102GT++ PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3at/802.3af PoE standards.

Feature :

  • Supports 2×10/100/1000Base-T(X) for power and data Output
  • Fully compliant with IEEE802.3at/802.3af standard
  • Auto protection for Over Voltage Power Input and over current output
  • Supports totally Power Output up to 180Watts for all ports usage.
  • Supports Power Input range from 24VDC  to 57VDC
  • High reliability and rigid IP-30 housing
  • DIN-Rail and Wall Mount Design

Specification :

ORing Media Converter Model INJ-102GT++ INJ-102GT++-24V
Physical Ports
10/100/1000Base-T(X) in RJ-45 Ethernet Port Input 2
10/100/1000Base-T(X) in RJ-45 Ethernet Port with P.S.E. Output 2
Operating Voltage
Input Voltage 50 ~ 57 Vdc 24 ~ 50 Vdc
Output Power 57V / 3157mA, 180 Watts max.(Total of 2 ports) 50V / 1800mA, 90 Watts max.(Total of 2 ports)
LED Indicator
Power Indicator PWR / Ready: 1 x LED
Green On: Power is on and functioning Normally.
PoE Indicators 2 x LED
Blue On: PoE Device Link
Blue Off : None PoE Device Detected
Protection
Short Circuit Protection Present
Over Load Protection Present
Physical Characteristics
Enclosure IP-30
Dimensions (W x D x H) 26.1 (W) x 70 (D) x 95 (H)mm (1.03 x 2.76 x 3.74 inch) 41(W)x70(D)x95(H) mm (1.61 x 2.75 x 3.74 inch.)
Weight (g) 300g 369g
Environmental
Storage Temperature -40 to 80°C (-40 to 176°F)
Operating Temperature -20 to 70°C (-4 to 158°F)
Operating Humidity 5% to 90% Non-condensing
Regulatory Approvals
EMI FCC Part 15, CISPR (EN55022) class A,
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-31
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 5 years