IES-2042PA is a Lite-Managed Redundant Ring Ethernet switch. With very compact size of housing, you can install IES-2042PA easily. In addition, it also supports of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring, O-Chain and STP/RSTP (IEEE802.1w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IES-2042PA provides the setting ability of Web-GUI and Windows Utility, also support the simple DIP-Switch setting function which offers great flexibility to set up the Ring. With it’s rigid IP-30 housing design, it can operate under harsh environment. The feature of wide operating temperature range from -40 to 70°C can satisfy most requirement of operation.
Feature :
- Fastest Redundant Ethernet Ring : O-Ring (recovery time < 10ms over 250 units of connection)
- Open-Ring support the other vendor’s ring technology in open architecture
- O-Chain support the multiple redundant ring technology
- Supports 4 ports 10/100Base-T(X) and 2 ports 100Base-FX SFP Port
- SNMP v1/v2c/v3 ,http server, telnet server support
- Web-based interface,telnet server and Windows utility (Open-Vision) configuration
- Event notification through Syslog, Email, SNMP trap, and relay
- Provides Web / Windows Utility / DIP-Switch function to set Ring
- Rigid IP-30 housing design
- DIN-Rail and wall mounting enabled
- Supports LLDP Protocol
Specification :
ORing Switch Model | IES-2042PA |
Physical Ports | |
100Base-FX SFP Ports | 2 |
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX | 4 |
Technology | |
Ethernet Standards | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3x for Flow control IEEE 802.1D for STP (Spanning Tree Protocol) IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) |
MAC Table | 2048 MAC addresses |
Priority Queues | 4 |
Processing | Store-and-Forward |
Switch Properties | Switching bandwidth : 1.2 Gbps VLAN : Port Based |
Security Features | Enable/disable ports VLAN to segregate and secure network traffic |
Software Features | STP/RSTP/MSTP (IEEE 802.1D/w/s) Redundant Ring (O-Ring) with recovery time less than 20ms over 250 DHCP Client Port base VLAN LLDP (Link Layer Discovery Protocol) Port configuration, status, statistics, monitoring, security SNMP v1/v2c/v3 and private MIB support |
Network Redundancy | O-Ring Open-Ring O-Chain STP RSTP Fast Recovery Mode |
DIP-Switch Setting | |
P.F. | When power fault enable relay warning system (On : Enable, Off : Disable function) |
R.E. | Enable/Disable O-Ring function (On : Enable, Off : Disable) |
R.M. | Enable/Disable Ring Master Mode (On : Enable, Off : Disable) |
R.S. | O-Ring redundant port select ( On : ring port set to port-5 and port-6, Off : ring port set to port-1 and port-2 ) |
LED Indicators | |
Power Indicator | Green : Power LED x 2 |
R.M. Indicator | Green : Indicates that the system is operating in O-Ring Master mode |
O-Ring Indicator | Green : Indicates that the system is operating in O-Ring mode |
Fault Indicator | Amber : Indicates unexpected event occurred |
100Base-FX SFP Port Indicator | Green for port Link/Act |
10/100Base-T(X) RJ45 Port Indicator | Green for port Link/Act. Amber for Link |
Fault Contact | |
Relay | Relay output to carry capacity of 1A at 24VDC |
Power | |
Redundant Input Power | Dual 12~48 VDC power input at 6-pin terminal block |
Power Consumption (Typ.) | 7 Watts |
Overload Current Protection | Present |
Reverse Polarity Protection | Present on terminal block |
Physical Characteristics | |
Enclosure | IP-30 |
Dimensions (W x D x H) | 26.1 mm (W) x 95 mm(D) x 144.3 mm(H) |
Weight (g) | 395 g |
Environmental | |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Operating Temperature | -40 to 70°C (-40 to 158°F) |
Operating Humidity | 5% to 95% Non-condensing |
Regulatory Approvals | |
EMI | FCC Part 15, CISPR (EN55022) class A |
EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
Shock | IEC60068-2-27 |
Free Fall | IEC60068-2-32 |
Vibration | IEC60068-2-6 |
Safety | EN60950-1 |
Warranty | 5 years |