IES-1162GC is the unmanaged Ethernet switch with 16×10/100Base-T(X) and 2xgigabit combo ports. IES-1162GC supports redundant power inputs, relay output alarm, and surge protection. The wide operating temperature range from -40°C to 70°C can satisfy most of operating environments. Especially, IES-1162GC features dual different redundant DC power inputs, two DC power inputs are on terminal block to avoid any unexpected fails on power on. Thus, IES-1162GC could guarantee a non-stop operation. Therefore, the switch is one of the most reliable choice for highly-unmanaged Ethernet application.
Feature :
- RJ-45 ports support Auto MDI/MDI-X switching function
• Provides Store-and-Forward switching architecture
• Provides 7.2Gbps Back-plane (Switching Fabric)
• Warning system by relay output
• Rigid IP-30 housing design
• DIN-Rail and walll mounting enabled
Specification :
| ORing Switch Model | IES-1162GC |
| Physical Ports | |
| 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX | 16 |
| Gigabit combo ports with 10/100/1000Base-T(X) and 1000Base-X SFP ports | 2 |
| Technology | |
| Ethernet Standards | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3z for 1000Base-X IEEE 802.3ab for 1000Base-T IEEE 802.3x for Flow control |
| MAC Table | 8192 MAC addresses |
| Priority Queues | 4 |
| Switch Properties | Switching latency: 9 μs Switching bandwidth: 7.2Gbps |
| Processing | Store-and-Forward |
| LED Indicators | |
| Power Indicator | Green : Power LED x 3 |
| Fault Indicator | Amber : Indicates power failure occurred |
| 10/100Base-T(X) RJ45 Port Indicator | Green for port Link/Act. Amber for Duplex/Collision |
| 10/100/1000Base-T(X) RJ45 Port Indicator | Green for port Link/Act. Amber for 100Mbps indicator |
| 1000Base-X Fiber Port Indicator | Green for port Link/Act |
| Fault Contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Power | |
| Redundant Input Power | Dual 12~48 VDC power input at 6-pin terminal block |
| Power Consumption (Typ.) | 7.68 Watts |
| Overload Current Protection | Present |
| Reverse Polarity Protection | Present on terminal block |
| Physical Characteristics | |
| Enclosure | IP-30 |
| Dimensions (W x D x H) | 96.4(W)x108.5(D)x154(H) mm (3.8 x 4.27 x 6.06 inches) |
| Weight (g) | 1235 g |
| Environmental | |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Operating Temperature | -40 to 70°C (-40 to 158°F) |
| Operating Humidity | 5% to 95% Non-condensing |
| Regulatory Approvals | |
| EMI | FCC Part 15, CISPR (EN55022) class A |
| EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950-1 |
| Warranty | 5 years |
