Oring IDS-5042-I+ Industrial 4-port Isolate RS422/485 to 2-port 10/100TX Device Server

by | Jun 18, 2015 | ORing

Oring IDS-5042-I+IDS-5042-I+ is an innovative secure 4-port RS-422/485 to 2 ports LAN secure device server with isolation featuring the standard features of device server, such like TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP. In addition, the Windows utility, DSTool, could configure multiple devices and set up the mappings of Virtual Com. The features of NAT Router Pass-Through, DDNS, and PPPoE make it more convenient for administrators to configure ORing’s device servers through NAT router from different IP domains or Internet via modem remotely. On the other hand, IDS-5042-I+ can simultaneously transfer data up to 5 redundant host PCs to aovid Ethernet connection breakdown or any host PC fails. Further, IDS- 5042-I+ features HTTPS, SSH, and SSL encryption to assure the security of critical data transmission.

IDS-5042-I+ supports RS-422/485 and provides dual redundant power inputs, 12~48 VDC, on terminal block to guarantee a non-stop operation. RS- 422/485 serial ports are with 2KV isolation. Further, IDS-5042-I+ features PoE P.D. (Power Device) function, compliant with IEEE802.3af standard, with 1kv isolation on the PoE port. With wide operating temperature, -10~70°C, and rugged IP-30 housing design, IDS-5042-I+ could operate in the harsh industrial environment. Therefore, IDS-5042-I+ is the best solution to the high demand of secure serial to Ethernet critical data communication.

Feature :

  • Operating Modes : Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP
  • Redundant multiple host devices :
    5 host devices : Virtual COM, TCP Server, TCP Client mode
    4 IP ranges : UDP
  • NAT Pass-Through : the user can manage IDS-5042-I+ through NAT router
  • Security : SSL data encryption ; secured management by HTTPS and SSHIP Access
    IP White List
  • Internet Communication : PPPoE authentication
  • Update DNS Hostname : DDNS
  • Dual redundant Ethernet port support redundant mode(Recovery time < 10ms)
  • Ethernet switch mode enable Daisy Chain
  • Event Warning by Syslog, Email, SNMP trap, and Beeper
  • Configurable by Web-based and Windows utility (DS-Tool)
  • 2KV isolation for RS422/485 serial ports
  • 1KV isolation for PoE P.D. port
  • Various Windows O.S. supported :
    Windows NT/2000/ XP/ 2003/VISTA(32/64bit)/Windows 7(32/64bit)

Specification :

ORing Media Converter Model IDS-5042-I+
Physical Ports
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX 2
PoE P.D. port PoE Present at ETH2
Power Device (IEEE 802.3af) : IEEE 802.3af compliant input interface
Over load and short circuit protection
Isolation Voltage : 1000 VDC min.
Isolation Resistance : 108 ohms min
Serial Ports
Connector 5-pin terminal block x 4
Operation Mode RS-422 / 4(2)-Wire RS-485. Which can be configured by DS-Tool
Serial Baud Rate 110 bps to 460.8 Kbps
Data Bits 5, 6, 7, 8
Parity odd, even, none, mark, space
Stop Bits 1, 1.5, 2
RS-422 Tx+,Tx-, Rx+, Rx-,GND
RS-485 (4-wire) Tx+,Tx-, Rx+, Rx-,GND
RS-485 (2-wire) Data+, Data-,GND
Isolating 2KV
Flow Control XON/XOFF
Network Features
Network Protocols ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP, SSL, PPPoE, DDNS
LED Indicators
Power Indicator PWR 1(2) / Ready :
Red On : Power is on and booting up.
Red Blinking : Indicates an IP conflict, or DHCP or BOOTP server did not respond properly.
Green On : Power is on and functioning Normally.
Green Blinking : Located by Administrator.
10/100Base-T(X) RJ45 Port Indicator Green for port Link/Act at 100Mbps. Amber for port Link/Act at 10Mbps.
Serial TX / RX LEDs Red : Serial port is receiving data
Green : Serial port is transmitting data
Fault Contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input Power Triple DC Inputs,48VDC from PoE and Dual DC inputs. 12~48VDC on 6-pin terminal block
Power Consumption (Typ.) 5.5 watts
Overload Current Protection Present
Reverse Polarity Protection Present
Physical Characteristics
Enclosure IP-30
Dimensions (W x D x H) 52(W) x 106.1(D) x 144.3(H) mm (2.05×4.18×5.68 inch.)
Weight (g) 667g
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -10 to 70°C (14 to 158°F)
Operating Humidity 5% to 95% Non-condensin
Regulatory Approvals
EMI FCC Part 15, CISPR (EN55022) class A,
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Warranty 5 years

Related Posts