MOXA ioLogik W5312

GPRS Micro RTU Controller with 8 DIs, 4 DIOs, and 8 DOs

The ioLogik W5312 series GPRS micro RTU controllers are rugged, compact solutions for remote monitoring and alarm systems. With the ioLogik W5312 series, you can define a GPRS connection strategy, including Always-On and Wake-On-Demand, to optimize data transmission rates for different applications. In addition, the operational cost of GPRS communication depends on the data transmission rate. With Moxa’s active technology, you can expect to cut transmission costs in half and offer different GPRS connection strategies to achieve better data transmission fees.

Automatic Data Updates from SD Cards Following Network Failures

When Active OPC Server™ and DA-Center™ are used together, upon network reconnection Moxa’s ioLogik W5300 series of RTU controllers are able to transmit data logs collected offline. After each network connection, the DA-Center database gateway will compare historical data stored on the ioLogik W5300’s local SD card with its received, real-time data, and then supplement any missing data by requesting re-transmission from the RTU.

Dynamic IP Assignments

For most cellular solutions, each remote modem as well as the central SCADA server is assigned static public IP when establishing bi-directional communication. Yet cellular network carriers charge higher monthly fees for static, public IPs than dynamic, private ones. Moxa’s ioLogik W5300 series and patented Active OPC Server allow users to implement dynamic IP assignments for the RTUs. The ioLogik W5300 can automatically establish communications with the Active OPC Server using a fixed IP, and the Active OPC Server™ will receive and register the ioLogik W5300’s IP address and receive or record tag updates accordingly.

I/O Expandability

The ioLogik W5300 can integrate external wired clients via daisychained ioLogik E1200 I/O modules. ioLogik E1200 modules support simple daisy chaining and cost-free peer-to-peer I/O extensions. Through the RJ45 Ethernet port, the ioLogik W5300 can support up to three connected ioLogik E1200 series I/O modules to enforce a flexible and scalable network expansion that best fits customers’ needs.

This rugged, compact solution is suitable for the following applications.

• Water and wastewater industries
• Broadcast and telecom radio tower monitoring
• Infrastructure management
• Oil & gas, power, and transportation
• Lighting control monitoring

Feature :

The Green Core Product Identity of the ioLogik series will be phased in starting May 1, 2014. During the product transition period, you may still receive products that use the previous panel design. Please click here to learn more about Moxa’s Green Core product transition.

Features and Benefits 

• Integrated, compact box solution for GPRS telemetry applications
• Definable GPRS connective strategy to optimize data transmission
• Intuitive menu driven front-end intelligence
• Flexible, Unicode alarm system supporting SMS, email, SNMP Trap, TCP/UDP
• One RS-232/422/485 serial port built-in to connect with field serial devices
• Backup and sustainable data logging function
• Seamless SCADA connectivity by Active OPC technology
• Configure, update firmware, and program over the air via ioAdmin
• Windows/WinCE VB/VC.NET and Linux C APIs

Diagram :

Specification :

• Inputs and Outputs
Digital Inputs	8 channels
Digital Outputs	8 channels
Configurable DI/Os	4 channels
Isolation	3k VDC or 2k Vrms
• Digital Input
Sensor Type	Wet Contact (NPN or PNP) and Dry Contact
I/O Mode	DI or Event Counter
Dry Contact	• On: short to GND • Off: open
Wet Contact (DI to GND)	• On: 0 to 3 VDC • Off: 10 to 30 VDC
Common Type	6 points per COM
Counter Frequency	900 Hz
Digital Filtering Time Interval	Software Configurable
• Digital Output
Type	Sink
I/O Mode	DO or Pulse Output
Pulse Output Frequency	1 kHz
Over-voltage Protection	45 VDC
Over-current Protection	2.6 A (4 channels @ 650 mA)
Over-temperature Shutdown	160°C (min.)
Current Rating	200 mA per channel
DIO Output Leakage Current	3.6 mA @ 24 VDC
• Power Requirements
Power Consumption	• Always on: 156 mA @ 24 VDC • On demand: 138 mA @ 24 VDC
• MTBF (mean time between failures)
Time	407,406 hrs
Database	Telcordia (Bellcore)
Common Specifications
• Computer
CPU	ARM9 based CPU, 32-bit/160 MHz
SDRAM/Flash	2 MB
• Storage
Expansion Slot	Up to 32 GB SD™ memory card (SD 2.0 compatible)
Note	For units operating in extreme temperatures, industrial grade, wide-temperature SD cards are required.
• Cellular
Network	Quad-band GSM/GPRS/EDGE 850/900/1800/1900 MHz
Internet	HSPA+: • Up to 5.76 Mbps upload speed. • Up to 14.4 Mbps download speed. UMTS: Up to 384k bps upload/download speed. GPRS/EDGE: • Multi-slot class: Class 12 • Coding schemes: CS1 to CS4 • Terminal device class: Class B
SMS	Point-to-Point Text/PDU mode
SIM Control Voltage	3 V / 1.8 V
• LAN
Ethernet	1 10/100 Mbps RJ45 port
Protection	1.5 kV magnetic isolation
Protocols	Modbus/TCP, TCP/IP, UDP, DHCP, BOOTP, SNMP, SNTP
• Serial Communication
Interface	1 x RS-232/422/485, software selectable (9-pin D-Sub male, or 5-contact terminal block)
Baudrate	300, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
• Power Requirements
Power Input	24 VDC nominal, 12 to 36 VDC
• Physical Characteristics
Dimensions	46.8 x 135 x 105 mm (1.84 x 5.31 x 4.13 in)
Weight	495 g
Mounting	DIN rail (standard), wall (optional)
• Environmental Limits
Operating Temperature	Standard Models: -10 to 55°C (14 to 131°F) Wide Temp. Models: -30 to 70°C (-22 to 158°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
Altitude	Up to 2000 m
Note	Please contact Moxa if you require products guaranteed to function properly at higher altitudes.
• Standards and Certifications
Safety	UL 508, EN 60950-1, NCC
EMI	EN 55022; EN 61000-3-2; EN 61000-3-3; FCC Part 15, Subpart B, Class A
EMS	EN 55024, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11, EN 61000-6-2
Shock	IEC 60068-2-27
Freefall	IEC 60068-2-32
Vibration	IEC 60068-2-6
Green Product	RoHS, CRoHS, WEEE
Note	Please check Moxa’s website for the most up-to-date certification status.
• Warranty
Warranty Period	2 years*
Note	*Because of the limited lifetime of power relays, products that use that component are covered by a 2-year warranty.
Details	See www.moxa.com/warranty