RMC-111 series is industrial rack mount card type Ethernet to fiber media converter for rack-mounted chassis box of RMC-1000, that supports hot-swappable and easy installation to RMC-1000. RMC-111 series is a cost-effective solution for the conversion between 10/100Base-T(X) and 100Base-FX interface, it allows you to extend communication distance by optical fiber. RMC-111 series supports MDI/MDIX auto detection, so you don’t need to use crossover wires.
RMC-111 series also support the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then RMC-111 series will force the link to shutdown as soon as noticed that the other link has failed, giving the application software a sign to react to the situation. Therefore, the RMC-111 series to collocate RMC-1000 is reliable media converter and can satisfy most demand of operating environment.
Feature :
- Supports 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X
- Support Ethernet to fiber or Ethernet to SFP port
- Support LFP (Link Fault Pass-through) function
- Supports full/half duplex operation
- Supports store and forward transmission
- Provided DIP-Switch to setting function
- Hot-swappable, High reliability and easy installation
- Up to 18 slot high density installation in RMC-1000 chassis on 19 inches rack
Specification :
| ORing Media Converter Model |
RMC-111FB-MM |
RMC-111FB-SS |
| Physical Ports | ||
| Port type | 100Based-FX Multi-mode Port | 100Based-FX Single-mode Port |
| Fiber Ports Number | 1 | 1 |
| Fiber Diameter (µm) | 62.5/125 µm 50/125 µm |
9/125 µm |
| Fiber Optical Connector | SC | SC |
| Typical Distance (Km) | 2 Km | 30 Km |
| Wavelength (nm) | 1310 nm | 1310 nm |
| Max. Output Optical Power (dbm) | -14 dbm | -8 dbm |
| Min. Output Optical Power (dbm) | -23.5 dbm | -15 dbm |
| Max. Input Optical Power (Saturation) | 0 dbm | 0 dbm |
| Min. Input Optical Power (Sensitivity) | -31 dbm | -34 dbm |
| Link Budget (db) | 7.5 db | 19 db |
| WLAN interface | ||
| Ethernet Standards | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-T(X) and 100Base-FX IEEE 802.3x for Flow control |
|
| Processing | Store-and-Forward | |
| DIP-Switch setting | DIP-Switch 1 for LFP mode selection : (ON) enable / (OFF) disable DIP-Switch 2 for Ethernet speed selection : (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate DIP-Switch 3 for Ethernet full/half duplex selection : (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate DIP-Switch 4 for fiber full/half duplex selection : (ON) Half-Duplex / (OFF) Full-Duplex |
|
| LED Indicators | ||
| Power indicator | Green : Power LED x 1 | |
| 10/100Base-T(X) RJ45 port indicator | Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link down Amber for 100Mbps/10Mbps indicator – (ON) Working at 100Mbps / (OFF) Working at 10Mbps Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex |
|
| 100Base-FX fiber port indicator | Green for fiber port Link/Act – (ON) Link up / (Flash) Acting / (OFF) Link down Green for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex |
|
| LFP statue indicator | Amber LED – (ON) LFP function fail / (OFF) LFP function disablem | |
| Power | ||
| Power consumption (Typ.) | 2.2 Watts | |
| Overload current protection | Present | |
| Physical Characteristics | ||
| Dimension (W x D x H) | 21.8 (W) x 73.1 (D) x 126 (H) mm | |
| Weight (g) | 145 g | |
| Environmental | ||
| Storage Temperature | -40 to 85°C (-40 to 185°F) | |
| Operating Temperature | -10 to 60°C (14 to 140°F) | |
| Operating Humidity | 5% to 95% Non-condensing | |
| Regulatory Approvals | ||
| EMI | FCC Part 15, CISPR (EN55022) class A | |
| EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 | |
| Shock | IEC60068-2-27 | |
| Free Fall | IEC60068-2-32 | |
| Vibration | IEC60068-2-6 | |
| Warranty | 5 years | |
