Oring IPMC-111PB Industrial mini type Ethernet to fiber PoE media converter with 1×10/100Base-T(X) P.S.E. and 1x100Base-FX, SFP socket

Posted on June 15, 2015 by escomco

IPMC-111PB is a cost-effective solution for the conversion interface between 10/100Base-T(X) and 100Base-FX, it allows you to extend communication distance by optical fiber. IPMC-111PB supports MDI/MDIX auto detection, so you don’t need to use crossover wires. IPMC-111PB also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IPMC-111PB has 1×10/100Base-T(X) P.S.E. (Power Sourcing Equipment) port to provide power in a PoE setup. IPMC-111PB with wide operating temperature range from -40°C~70°C and accepts a wide voltage range from dual 50~57 VDC power inputs, so it is suitable for harsh operating environments.

IPMC-111PB also supports the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then IPMC-111PB will force the link to shutdown as soon as noticed that the other link has failed, to notice the administrator to react to the situation. Therefore, the IPMC-111PB is reliable media converter with PoE capability and can satisfy most demand of operating environment

Feature :

Supports 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X
Supports Ethernet to fiber with SFP socket
Support LFP (Link Fault Pass-through) function
Supports full/half duplex operation mode
P.S.E. fully compliant with IEEE802.3at standard, provide up to 30 Watts
Supports store and forward transmission
Provided DIP-Switch to set operation mode
High reliability and rigid IP-30 housing
DIN-Rail and panel mounting enabled

Specification :

ORing Media Converter Model	IPMC-111PB
Physical Ports
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX	1
Technology
Ethernet Standards	IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3x for Flow control IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
Processing	Store-and-Forward
DIP-Switch setting	DIP-Switch 1 for LFP mode selection : (ON) enable / (OFF) disable DIP-Switch 2 for Ethernet speed selection : (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate DIP-Switch 3 for Ethernet full/half duplex selection : (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate DIP-Switch 4 for fiber full/half duplex selection : (ON) Half-Duplex / (OFF) Full-Duplex
LED Indicators
Power indicator	Green : Power LED x 2 (ON : power input on-line / (OFF) power input off-line
10/100Base-T(X) RJ45 port indicator	Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link down Amber for 100Mbps/10Mbps indicator – (ON) Working at 100Mbps / (OFF) Working at 10Mbps Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
100Base-FX fiber port indicator	Green for fiber port Link/Act – (ON) Link up / (Flash) Acting / (OFF) Link down Green for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
LFP statue indicator	Amber LED – (ON) LFP function fail / (OFF) LFP function disable
PoE indicator	Amber for P.S.E. indicator
Power
Input power	Dual 50~57 VDC voltage power inputs at 4-pin terminal block
Power consumption (Typ.)	31.2 Watts (P.S.E. output included)
Overload current protection	Present
Reverse polarity protection	Present
Physical Characteristic
Enclosure	IP-30
Dimension (W x D x H)	26.1 (W) x 70 (D) x 95 (H)mm (1.03 x 2.76 x 3.74 inch)
Weight (g)	210 g
Environmental
Storage Temperature	-40 to 85°C(-40 to 185°F)
Operating Temperature	-40 to 70°C (-40 to 158°F)
Operating Humidity	5% to 95% Non-condensing
Regulatory approvals
EMI	FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
EMS	EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock	IEC60068-2-27
Free Fall	IEC60068-2-32
Vibration	IEC60068-2-6
Safety	EN60950-1
Warranty	5 years

Oring RGMC-111GPB Industrial Rack mount card type Ethernet to fiber media converter with 1×100/1000Base-T(X) to 1×100/1000Base-X, SFP socket

Posted on June 15, 2015 by escomco

RGMC-111GPB is industrial rack mount card type Ethernet to fiber media converter for rack-mounted chassis box of RMC-1000, that supports hot-swappable and easy installation to RMC-1000. RGMC-111GPB is a cost-effective solution for the conversion between 100/1000Base-T(X) and 100/1000Base-X SFP interface, it allows you to extend communication distance by optical fiber. RGMC-111GPB supports MDI/MDIX auto detection, so you don’t need to use crossover wires. Therefore, the RGMC-111GPB to collocate RMC-1000 is reliable media converter and can satisfy most demand of operating environment.

Feature :

Supports 1 port 100/1000Base-T(X) auto-negotiation and auto-MDI/MDI-X
Support Ethernet to SFP port signal conversion
Ethernet port supports full/half duplex operation
SFP port support full-duplex operation
Supports store and forward transmission
Provided DIP-Switch to setting SFP speed
Hot-swappable, High reliability and easy installation
Up to 18 slot high density installation in RMC-1000 chassis on 19 inches rack

Specification :

ORing Media Converter Model	RGMC-111GPB
Physical Ports
100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX	1
100/1000Base-X SFP Port	1
Technology
Ethernet Standards	IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3z for 1000Base-X IEEE 802.3ab for 1000Base-T
Processing	Store-and-Forward
DIP-Switch	DIP-Switch 1 (ON) and 2 (ON) : SFP speed setting to 100Mbps DIP-Switch 1 (OFF) and 2 (OFF) : SFP speed setting to 1000Mbps
LED Indicators
Power Indicator	Green : Power LED x 1
100/1000Base-T(X) RJ45 port Indicator	LED for Link/Act and Speed indicator ~ Green on only : 1000Mbps Link/Act Green and Amber on : 100Mbps Link/Act Note : If Amber on only : 10Mbps (This is not avail mode)
100/1000Base-X SFP port Indicator	Green for port Link/Act.
Power
Power Consumption (Typ.)	3.6 Watts
Overload Current Protection	Present
Physical Characteristics
Dimensions (W x D x H)	21.8(W) x 66.5(D) x 126(H) mm
Weight (g)	125g
Environmental
Storage Temperature	-40 to 85°C (-40 to 185°F)
Operating Temperature	-10 to 60°C (14 to 140°F)
Operating Humidity	5% to 95% Non-condensing
Regulatory Approvals
EMI	FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
EMS	EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock	IEC60068-2-27 , EN61373
Free Fall	IEC60068-2-32
Vibration	IEC60068-2-6 , EN61373
Warranty	2 years

Oring RMC-111PB Industrial Rack mount card type Ethernet to fiber media converter with 1×10/100Base-T(X) and 1x100Base-FX, SFP socket

Posted on June 15, 2015 by escomco

RMC-111 series is industrial rack mount card type Ethernet to fiber media converter for rack-mounted chassis box of RMC-1000, that supports hot-swappable and easy installation to RMC-1000. RMC-111 series is a cost-effective solution for the conversion between 10/100Base-T(X) and 100Base-FX interface, it allows you to extend communication distance by optical fiber. RMC-111 series supports MDI/MDIX auto detection, so you don’t need to use crossover wires.

RMC-111 series also support the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then RMC-111 series will force the link to shutdown as soon as noticed that the other link has failed, giving the application software a sign to react to the situation. Therefore, the RMC-111 series to collocate RMC-1000 is reliable media converter and can satisfy most demand of operating environment.

Feature :

Supports 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X
Support Ethernet to fiber or Ethernet to SFP port
Support LFP (Link Fault Pass-through) function
Supports full/half duplex operation
Supports store and forward transmission
Provided DIP-Switch to setting function
Hot-swappable, High reliability and easy installation
Up to 18 slot high density installation in RMC-1000 chassis on 19 inches rack

Specification :

ORing Media Converter Model	RMC-111PB
Physical Ports
10/100Base0T(X) port in RJ45 Auto MDI/MDIX	1
100Base-FX SFP port	1
Technology
Ethernet Standards	IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-T(X) and 100Base-FX IEEE 802.3x for Flow control
Processing	Store-and-Forward
DIP-Switch setting	DIP-Switch 1 for LFP mode selection : (ON) enable / (OFF) disable DIP-Switch 2 for Ethernet speed selection : (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate DIP-Switch 3 for Ethernet full/half duplex selection : (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate DIP-Switch 4 for fiber full/half duplex selection : (ON) Half-Duplex / (OFF) Full-Duplex
LED Indicators
Power indicator	Green : Power LED x 1 (ON : power input on-line / (OFF) power input off-line
10/100Base-T(X) RJ45 port indicator	Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link down Amber for 100Mbps/10Mbps indicator – (ON) Working at 100Mbps / (OFF) Working at 10Mbps Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
100Base-FX fiber port indicator	Green for fiber port Link/Act – (ON) Link up / (Flash) Acting / (OFF) Link down Green for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
LFP statue indicator	Amber LED – (ON) LFP function fail / (OFF) LFP function disablem
Power
Power consumption (Typ.)	2.2 Watts
Overload current protection	Present
Physical Characteristic
Dimension (W x D x H)	21.8 (W) x 73.1 (D) x 126 (H) mm
Weight (g)	140 g
Environmental
Storage Temperature	-40 to 85°C (-40 to 185°F)
Operating Temperature	-10 to 60°C (14 to 140°F)
Operating Humidity	5% to 95% Non-condensing
Regulatory approvals
EMI	FCC Part 15, CISPR (EN55022) class A
EMS	EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock	IEC60068-2-27
Free Fall	IEC60068-2-32
Vibration	IEC60068-2-6
Warranty	5 years

Oring RMC-111FB Industrial Rack-mount card type Ethernet to fiber media converter with 1×10/100Base-T(X) and 1x100Base-FX

Posted on June 15, 2015 by escomco

Feature :

Supports 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X
Support Ethernet to fiber or Ethernet to SFP port
Support LFP (Link Fault Pass-through) function
Supports full/half duplex operation
Supports store and forward transmission
Provided DIP-Switch to setting function
Hot-swappable, High reliability and easy installation
Up to 18 slot high density installation in RMC-1000 chassis on 19 inches rack

Specification :

ORing Media Converter Model	RMC-111FB-MM	RMC-111FB-SS
Physical Ports
Port type	100Based-FX Multi-mode Port	100Based-FX Single-mode Port
Fiber Ports Number	1	1
Fiber Diameter (µm)	62.5/125 µm 50/125 µm	9/125 µm
Fiber Optical Connector	SC	SC
Typical Distance (Km)	2 Km	30 Km
Wavelength (nm)	1310 nm	1310 nm
Max. Output Optical Power (dbm)	-14 dbm	-8 dbm
Min. Output Optical Power (dbm)	-23.5 dbm	-15 dbm
Max. Input Optical Power (Saturation)	0 dbm	0 dbm
Min. Input Optical Power (Sensitivity)	-31 dbm	-34 dbm
Link Budget (db)	7.5 db	19 db
WLAN interface
Ethernet Standards	IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-T(X) and 100Base-FX IEEE 802.3x for Flow control
Processing	Store-and-Forward
DIP-Switch setting	DIP-Switch 1 for LFP mode selection : (ON) enable / (OFF) disable DIP-Switch 2 for Ethernet speed selection : (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate DIP-Switch 3 for Ethernet full/half duplex selection : (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate DIP-Switch 4 for fiber full/half duplex selection : (ON) Half-Duplex / (OFF) Full-Duplex
LED Indicators
Power indicator	Green : Power LED x 1
10/100Base-T(X) RJ45 port indicator	Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link down Amber for 100Mbps/10Mbps indicator – (ON) Working at 100Mbps / (OFF) Working at 10Mbps Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
100Base-FX fiber port indicator	Green for fiber port Link/Act – (ON) Link up / (Flash) Acting / (OFF) Link down Green for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
LFP statue indicator	Amber LED – (ON) LFP function fail / (OFF) LFP function disablem
Power
Power consumption (Typ.)	2.2 Watts
Overload current protection	Present
Physical Characteristics
Dimension (W x D x H)	21.8 (W) x 73.1 (D) x 126 (H) mm
Weight (g)	145 g
Environmental
Storage Temperature	-40 to 85°C (-40 to 185°F)
Operating Temperature	-10 to 60°C (14 to 140°F)
Operating Humidity	5% to 95% Non-condensing
Regulatory Approvals
EMI	FCC Part 15, CISPR (EN55022) class A
EMS	EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock	IEC60068-2-27
Free Fall	IEC60068-2-32
Vibration	IEC60068-2-6
Warranty

Oring RMC-111FB-SS Industrial Rack-mount card type Ethernet to fiber media converter with 1×10/100Base-T(X) and 1x100Base-FX

Posted on June 15, 2015 by escomco

Feature :

Supports 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X
Support Ethernet to fiber or Ethernet to SFP port
Support LFP (Link Fault Pass-through) function
Supports full/half duplex operation
Supports store and forward transmission
Provided DIP-Switch to setting function
Hot-swappable, High reliability and easy installation
Up to 18 slot high density installation in RMC-1000 chassis on 19 inches rack

Specification :

ORing Media Converter Model	RMC-111FB-MM	RMC-111FB-SS
Physical Ports
Port type	100Based-FX Multi-mode Port	100Based-FX Single-mode Port
Fiber Ports Number	1	1
Fiber Diameter (µm)	62.5/125 µm 50/125 µm	9/125 µm
Fiber Optical Connector	SC	SC
Typical Distance (Km)	2 Km	30 Km
Wavelength (nm)	1310 nm	1310 nm
Max. Output Optical Power (dbm)	-14 dbm	-8 dbm
Min. Output Optical Power (dbm)	-23.5 dbm	-15 dbm
Max. Input Optical Power (Saturation)	0 dbm	0 dbm
Min. Input Optical Power (Sensitivity)	-31 dbm	-34 dbm
Link Budget (db)	7.5 db	19 db
WLAN interface
Ethernet Standards	IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-T(X) and 100Base-FX IEEE 802.3x for Flow control
Processing	Store-and-Forward
DIP-Switch setting	DIP-Switch 1 for LFP mode selection : (ON) enable / (OFF) disable DIP-Switch 2 for Ethernet speed selection : (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate DIP-Switch 3 for Ethernet full/half duplex selection : (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate DIP-Switch 4 for fiber full/half duplex selection : (ON) Half-Duplex / (OFF) Full-Duplex
LED Indicators
Power indicator	Green : Power LED x 1
10/100Base-T(X) RJ45 port indicator	Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link down Amber for 100Mbps/10Mbps indicator – (ON) Working at 100Mbps / (OFF) Working at 10Mbps Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
100Base-FX fiber port indicator	Green for fiber port Link/Act – (ON) Link up / (Flash) Acting / (OFF) Link down Green for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
LFP statue indicator	Amber LED – (ON) LFP function fail / (OFF) LFP function disablem
Power
Power consumption (Typ.)	2.2 Watts
Overload current protection	Present
Physical Characteristics
Dimension (W x D x H)	21.8 (W) x 73.1 (D) x 126 (H) mm
Weight (g)	145 g
Environmental
Storage Temperature	-40 to 85°C (-40 to 185°F)
Operating Temperature	-10 to 60°C (14 to 140°F)
Operating Humidity	5% to 95% Non-condensing
Regulatory Approvals
EMI	FCC Part 15, CISPR (EN55022) class A
EMS	EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock	IEC60068-2-27
Free Fall	IEC60068-2-32
Vibration	IEC60068-2-6
Warranty	5 years