The INJ-102GT++ PoE Injector series is not only an IEEE802.3at compliant device but also an advanced high power PoE injector. It is intelligent detection that provided 2-ports 10/100/1000Base-T (X) PoE outputs. The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Therefore, only an IEEE 802.3at/802.3af compliant device can be powered with the INJ-102GT++ PoE Injector. Typically in Gigabit networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards. Because of its 24~57VDC power input with boosting circuit, the total output power can be up to 180Watts[Note2] for all ports usage. The installer doesn’t need to worry about voltage drops caused by cable length. The INJ-102GT++ PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3at/802.3af PoE standards.
Feature :
- Supports 2×10/100/1000Base-T(X) for power and data Output
- Fully compliant with IEEE802.3at/802.3af standard
- Auto protection for Over Voltage Power Input and over current output
- Supports totally Power Output up to 180Watts for all ports usage.
- Supports Power Input range from 24VDC to 57VDC
- High reliability and rigid IP-30 housing
- DIN-Rail and Wall Mount Design
Specification :
| ORing Media Converter Model | INJ-102GT++ | INJ-102GT++-24V |
| Physical Ports | ||
| 10/100/1000Base-T(X) in RJ-45 Ethernet Port Input | 2 | |
| 10/100/1000Base-T(X) in RJ-45 Ethernet Port with P.S.E. Output | 2 | |
| Operating Voltage | ||
| Input Voltage | 50 ~ 57 Vdc | 24 ~ 50 Vdc |
| Output Power | 57V / 3157mA, 180 Watts max.
(Total of 2 ports) |
50V / 1800mA, 90 Watts max.
(Total of 2 ports) |
| LED Indicator | ||
| Power Indicator | PWR / Ready: 1 x LED Green On: Power is on and functioning Normally. |
|
| PoE Indicators | 2 x LED Blue On: PoE Device Link Blue Off : None PoE Device Detected |
|
| Protection | ||
| Short Circuit Protection | Present | |
| Over Load Protection | Present | |
| Physical Characteristics | ||
| Enclosure | IP-30 | |
| Dimensions (W x D x H) | 26.1 (W) x 70 (D) x 95 (H)mm (1.03 x 2.76 x 3.74 inch) | 41(W)x70(D)x95(H) mm (1.61 x 2.75 x 3.74 inch.) |
| Weight (g) | 300g | 369g |
| Environmental | ||
| Storage Temperature | -40 to 80°C (-40 to 176°F) | |
| Operating Temperature | -20 to 70°C (-4 to 158°F) | |
| Operating Humidity | 5% to 90% Non-condensing | |
| Regulatory Approvals | ||
| EMI | FCC Part 15, CISPR (EN55022) class A, | |
| EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 | |
| Shock | IEC60068-2-27 | |
| Free Fall | IEC60068-2-31 | |
| Vibration | IEC60068-2-6 | |
| Safety | EN60950-1 | |
| Warranty | 5 years | |
SPL-101GT-AT is a high power PoE Splitter for use in Power over Ethernet systems. With Ethernet Input (data + power) port and Output (data only) port, SPL-101GT-AT may split power from existing LAN cable and convert up to 24VDC/1.25A for power hungry applications such as Wireless APs, Security cameras and IP Phones. The internal current limit, short-circuit and overload protection are implemented for use as a DC power supply.