Oring IDS-5011-WG Industrial 1-port RS232/422/485 to 802.11 b/g WLAN and 1-port 10/100TX Device Server

by | Jun 19, 2015 | ORing

Oring IDS-5011-WGIDS-5011-WG is an innovative secure 1-port RS232/422/485 to 802.11b/g WLAN, up to 54Mbps, and 1-port LAN device server featuring the standard features of device server, such like TCP/IP interface and versatile operation modes : Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP. In addition, the Windows utility, DS-Tool, could configure multiple devices and set up the mappings of Virtual Com. The features of NAT Router Pass-Through, DDNS, and PPPoE make it more convenient for administrators to configure ORing’s device servers through NAT router from different IP domains or Internet via modem remotely. On the other hand, IDS-5011-WG can simultaneously transfer data up to 5 redundant host PCs to aovid Ethernet connection breakdown or any host PC fails. Further, IDS-5011-WG features HTTPS, SSH, SSL encryption, and 802.1X to assure the security of critical data transmission.

IDS-5011-WG supports RS-232/422/485 and provides dual redundant power inputs, 12~48 VDC, on DC power jack and terminal block to guarantee a non-stop operation. With wide operating temperature, -10~65°C, and rugged IP-30 housing design, IDS-5011-WG could operate in the harsh industrial environment. Therefore, IDS-5011-WG is the best solution to the high demand of secure serial to WLAN critical data communication.

Feature :

  • High Speed Air Connectivity : WLAN interface support up to 54Mbps link speed
  • Operating Modes : Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP
  • Redundant multiple host devices : 5 host devices : Virtual COM, TCP Server, TCP Client mode 4 IP
    ranges : UDP
  • NAT Pass-Through : the user can manage IDS-5011-WG through NAT router
  • High Security Capability : SSL data encryption ; secured management by HTTPS and SSH ; IP Access : IP
    White List ; wireless : WEP/WPA/PA2/802.1X/TKIP
  • Internet Communication : PPPoE authentication
  • Update DNS Hostname : DDNS
  • Event Warning by Syslog, Email, SNMP trap, and Beeper
  • Configurable by Web-based and Windows utility (DS-Tool)
  • Various Windows O.S. supported : Windows NT/2000/ XP/ 2003/VISTA(32/64bit)/ Windows 7(32/64bit)

Specification :

ORing Media Converter Model IDS-5011-WG
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 1
WLAN interface
WLAN Standard IEEE802.11b/g
Operating Mode Client mode
Antenna and Connector 2dBi antenna on reversed SMA connector
Radio Frequency Type DSSS, OFDM
Modulation IEEE802.11b : CCK, DQPSK, DBPSK
IEEE802.11g : OFDM with BPSK, QPSK, 16QAM, 64QAM
Frequency America/FCC : 2.412~2.462 GHz (11 channels)
Europe CE/ETSI : 2.412~2.472 GHz (13 channels)
Transmission Rate IEEE802.11b : 1/ 2/ 5.5/ 11 Mbps
IEEE802.11g : 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 Mbps
Transmit Power IEEE802.11b/g : 16dBm
Receiver Sensitivity -81dBm @ 11Mbps, PER< 8%
-64dBm @ 54Mbps, PER< 10%
Encryption Security WEP : (64-bit ,128-bit key supported)
WPA / WPA2 :IEEE802.11i(WEP and AES encryption)
WPA-PSK (256-bit key pre-shared key supported)
TKIP encryption
802.1X Authentication supported
Serial Ports
Connector DB9(male) x 1
Operation Mode RS-232 / RS-422 / 4(2)-Wire RS-485. Which can be configured by DS-Tool
Serial Baud Rate 110 bps to 230.4 Kbps
Data Bits 5, 6, 7, 8
Parity odd, even, none, mark, space
Stop Bits 1, 1.5, 2
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
RS-422 Tx+,Tx-, Rx+, Rx-,GND
RS-485 (4-wire) Tx+,Tx-, Rx+, Rx-,GND
RS-485 (2-wire) Data+, Data-,GND
Flow Control XON/XOFF, RTS/CTS, DTR/DSR
Network Features
Network Protocols ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP, SSL, PPPoE, DDNS
LED Indicators
Power Indicator PWR 1(2) / Ready :
Red On : Power is on and booting up.
Red Blinking : Indicates an IP conflict, or DHCP or BOOTP server did not respond properly.
Green On : Power is on and functioning Normally.
Green Blinking : Located by Administrator.
10/100Base-T(X) RJ45 Port Indicator Green for port Link/Act at 100Mbps. Amber for port Link/Act at 10Mbps.
WLAN Indicator Green for WLAN Link /ACT
Serial TX / RX LEDs Red : Serial port is receiving data
Green : Serial port is transmitting data
Power
Redundant Input Power Dual DC inputs. 12~48VDC on 3-pin terminal block and power jack
Power Consumption (Typ.) 5 watts
Overload Current Protection Present
Reverse Polarity Protection Present on terminal block
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -10 to 65°C (14 to 149°F)
Operating Humidity 5% to 95% Non-condensin
Regulatory Approvals
EMI FCC Part 15, CISPR (EN55022) class A,
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Warranty 3 years

Related Posts