Ruckus ZoneFlex SmartPoint 7321-U

Dual-Band 802.11n Access Point with 3G/LTE USB Backhaul

The ZoneFlex 7321-U is the ideal solution for carrier class Mi-Fi. For service providers who wish to monetize spectrum and for Internet providers, the 7321-U can be quickly and easily deployed in environments where there is limited wired connectivity. Also perfectly suited for transportation deployments, such as trains, busses, boats etc., the 7321-U can leverage LTE/3G mobility to provide seamless Wi-Fi to passengers or employees. The 7321-U is also an ideal solution for retail vendors wishing to back-up their existing PoS systems in cases of WAN failure or downtime as well as many other enterprise vendors with the need for a WAN back-up system.

The ZoneFlex 7321 is capable of running on either 2.4GHz or 5GHz with a click of a button. Performance is enhance by up to 4dB with transmit beamforming capable clients. Performance is further enhanced by ChannelFly, Ruckus’ unique channel selection approach that increases capacity by up to 50 percent over similar products from other vendors.

Feature :

USB backhaul and simple driver provisioning

• Custom drivers
• Pushed to APs from either ZoneDirector or SmartCell Gateway (SCG 200)

Best-in-class performance and cost effective

• Selectable band (5GHz/2.4GHz) support
• 2.4GHz, 110Mbps of theoretical maximum targeted udp throughput
• 5GHz, 230Mbps of theoretical maximum targeted udp throughput
• Transmit beamforming
• Advanced channel management

Transmit beamforming and ChannelFly

• Results in 2 to 4 times extended range and coverage
• Up to 50 percent capacity increase with ChannelFly
• Up to 3 dB signal gain with transmit beamforming

Differentiated services with multiple SSIDs

• 8 BSSIDs with unique QoS and security policies
• WEP, WPA-PSK (AES), 802.1X support
• Zero-IT and Dynamic PSK
• Captive portal and guest accounts
• RADIUS and Active Directory support

Please Note

• The 7231-U is a carrier specific product that requires customization for the USB driver. As such, minimum quantities of 1000 units are required for purchase.

Diagram :

Specification :

Power	12V DC, 12.95W Power over Ethernet Class 3
Physical Size	13 cm (5.1″) (L), 13 cm (5.1″) (W), 2.8 cm (1.1″) (H)
Weight	198 g (7 oz.)
Ports	Ethernet: 1 port, auto MDX, auto-sensing 10/100/1000 Mbps, RJ-45 Power over Ethernet (802.3af) USB
Lock Option	Integrated Kensington lock
Environmental Conditions	Operating Temperature: 32°F (0°C) – 122°F (50°C) with PoE 32°F (0°C) – 104°F (40°C) with AC Operating humidity: 10% – 95% non-condensing
Power draw	2W minimum 3W average 6.7W peak

Performance and Capacity
Concurrent stations	Up to 256
Simultaneous VoIP Clients	Up to 20

Applications
Hotspot	WISPr
Voice	802.11e/WMM U-APSD

Network Architecture
IP	IPv4, IPv6, dual-stack
VLANs	802.1Q (1 per BSSID or dynamic, per user based on RADIUS) Port-based
802.1x for Ethernet Ports	Authenticator Supplicant
Tunneling	L2TP, PPPoE

Multimedia and Quality of Service
802.11e/WMM	Supported
Software Queues	Per traffic type (4), per client
Traffic Classification	Automatic, heuristics and TOS based or VLAN-defined
Rate Limiting	Dynamic, per-user or per-WLAN

Management
Deployment Options	Managed by ZoneDirector Managed by SmartCell 200
Configuration	Web user interface (HTTP/S) CLI (Telnet/SSH), SNMP v1, 2, 3
Auto Software Updates	FTP or TFTP, remote auto available

Wi-Fi
Standards	802.11b/g/a/n
Supported Data Rates	54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 Mbps 802.11n data rates
Auto Channel Selection	Supported
RF power output	Max transmit power: 26 dBm (2.4 GHz) 24 dBm (5.0 GHz) Country-specific power settings are configurable
Transmit Power Control	Supported
BSSID	Up to 8
Power Save	Supported
Wireless Security	WEP, WPA-PSK, WPA-TKIP, WPA2 AES, 802.11i Authentication via 802.1X with the ZoneDirector, local authentication database, support for RADIUS and ActiveDirectory
Certifications	U.S., Europe, Australia, Brazil, Canada, Colombia, Hong Kong, India, Israel, Malaysia, Mexico, New Zealand, Philippines, Singapore, Taiwan, Thailand, Vietnam WEEE/RoHS compliance EN 60601-1-2 Wi-Fi Alliance Certification (Wi-Fi Certified™)