Oring IAP-6701-WG+ Industrial outdoor IEEE 802.11 b/g wireless access point with 1×10/100Base-T(X) PoE P.D., IP-67 grade

by | Jun 20, 2015 | ORing

Oring IAP-6701-WG+IAP-6701-WG+ is a reliable IP-67 outdoor IEEE802.11b/g WLAN Access Point with 1 PoE P.D. Ethernet port. It can be configured to operate in AP/ Bridge/Repeater/AP-Client/Client mode. It is specifically designed for the toughest industrial environments. In combination with its IP-67 design and the superb management functionality, IAP-6701-WG+ provide a waterproof, and dust-tight connection. You are able to configure IAP-6701-WG+ by WEB interface via LAN port or WLAN interface. In addition, IAP-6701-WG+ also provides P.D. feature which is fully compliant with IEEE802.3af PoE P.D. specification to save the layout cost of power line. The IAP-6701-WG+ can be easily adopted in all kinds of applications and provides the most rugged solutions for managing your network in outdoor. Therefore, IAP-6701-WG+ is one of the best communication solutions for outdoor wireless applications.

Feature :

  • WLAN interface supports up to 54Mbps link speed
  • Various kinds of operation modes supported : AP/Bridge/Repeater/ AP-Client/Client mode
  • Various kinds of encryption supported : WEP/WPA/WPA-PSK(TKIP,AES) /WPA2/ WPA2-PSK     (TKIP,AES)/802.1X Authentication
  • Supports X-Roaming < 100 ms
  • Supports wireless load balance
  • Wireless connecting status monitoring
  • Versatile modes & event alarm by e-mail
  • HTTPs & SSH protocol supported for secured management
  • IP table to prevent access from unauthorized IP address
  • IP Configurable by Windows utility (AP-Tool)

Specification :

ORing Media Converter Model IAP-6701-WG+
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE P.D. Fully compliant with IEEE 802.3af Power Device specification
Over load and short circuit protection
Isolation Voltage : 1000 VDC min
Isolation Resistance : 108 ohms min
WLAN interface
Operating Mode AP/Bridge/Repeater/AP-Client/Client
Antenna Built-in 12dBi panel antenna
Radio Frequency Type DSSS,OFDM
Modulation IEEE802.11b : CCK, DQPSK, DBPSK
IEEE802.11g : OFDM with BPSK, QPSK, 16QAM, 64QAM
Frequency Band America/FCC : 2.412~2.462 GHz (11channels)
Europe CE/ETSI : 2.412~2.472 Ghz (13 channels)
Transmission Rate IEEE802.11b : 1/ 2/ 5.5/ 11 Mbps
IEEE802.11g : 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 Mbps
Transmit Power IEEE802.11b : 18dBm
IEEE802.11g : 14dBm
Receiver Sensitivity -80dBm @ 11Mbps, PER< 8%;
-65dBm @ 54Mbps, PER< 10%
Encryption Security WEP : (64-bit ,128-bit key supported)
WPA /WPA2 : IEEE802.11i(WEP and AES encryption)
WPA-PSK (256-bit key pre-shared key supported)
802.1X Authentication supported
TKIP encryption
Wireless Security SSID broadcast disable
Protocol Support
Protocol ARP, BOOTP, DHCP, DNS, HTTPs, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, STP (IEEE 802.1D)
Power
Input Power 48 VDC from PoE
Power Consumption (Typ.) 6 Watts
Physical Characteristics
Enclosure IP-67
Dimensions (W x D x H) 197.5(W) x 63(D) x 197.5(H) mm (7.80×6.34×7.80 inch.)
Weight (g) 1040g
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -20 to 70°C (-4 to 158°F)
Operating Humidity 0~100% Non-condensing
Regulatory Approvals
EMI FCC Part 15, CISPR (EN55022) class A,
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 3 years

Related Posts