The Gigabit PoE+ Injector, model TPE-115GI, combines electrical power with a Gigabit network connection to produce a Gigabit Power over Ethernet Plus (PoE+) signal. Connect this device to a non-PoE Gigabit switch and then run an Ethernet cable for up to 100 meters (328 ft.) to network PoE+ or PoE devices. The integrated power supply reduces installation clutter.
Auto sensing technology delivers 30 Watts to 802.3at PoE+ devices or 15 Watts to 802.3af PoE devices. No need to buy a PoE switch—use an existing open port from a non-PoE switch to save installation and equipment costs when installing TRENDnet PoE access points and IP cameras in remote locations.
- Full Duplex Gigabit speeds
- Converts a non-PoE Gigabit port to a PoE+ or PoE Gigabit port
- Integrated power supply
- Network distances of up to 100 meters (328 feet)
- Save on installation and equipment costs
- IEEE 802.3at PoE+ (30 Watt) compliant
- Backwards compatible with IEEE 802.3af PoE (15 Watt) devices
- Automatically supplies a PoE+ (30 Watts) or PoE (15 Watts) connection to the device
- Integrated power supply
- Network devices for distances of up to 100 meters (328 ft.)
- 1 x 10/100/1000 Mbps Auto-MDIX Data In port
- 1 x 10/100/1000 Mbps PoE+ Auto-MDIX Data Out port
- Power port with LED indicator
- Easily install a PoE+ or POE device where a power outlet is not available
- Reduce installation and network equipment costs
- Safeguards network devices with short circuit protection
- 3-year limited warranty
Diagram :
Hardware
- Standard
- IEEE 802.3 10Base-T
- IEEE 802.3u 100Base-TX
- IEEE 802.3ab Gigabit Ethernet
- IEEE 802.3af Power over Ethernet
- IEEE 802.3at Power over Ethernet Plus (PoE+)
- Network Media
- 10 Mbps: UTP/STP Cat. 5 and 5e up to 100 meters
- 100 Mbps: UTP/STP Cat. 5 and 5e up to 100 meters
- Gigabit: UTP/STP Cat 5e and 6 up to 100 meters
- Ports
- 1 x 10/100/1000 Mbps Data-In (Data only)
- 1 x 10/100/1000 Mbps PWR+Data out (Data + Power)
- PoE Delivery
- Pair 1: Pin 1, 2
- Pair 2: Pin 3, 6
- Power
- Input: 100~240 V, 50~60 Hz, 0.65 A max.
- Power Consumption
- Max 30 Watts
- Dimensions(W x D x H)
- 133 x 63 x 35 mm (5.2 x 2.5 x 1.4 in.)
- Weight
- 162 g (5.7 oz.)
- Temperature
- Operation: -10°C~45°C (14°F~ 113°F)
- Storage: -20°C~60°C (-4°F~140°F)
- Humidity
- Max 95% (non-condensing)
- Certifications
- CE, FCC