The Gigabit Power over Ethernet Splitter, model TPE-114GS, is used to install non-PoE devices in remote locations. It splits a networked PoE signal into separate power and Gigabit data sources. Run an Ethernet cable from a Gigabit PoE switch (or injector) for distances up to 100 meters and then split the PoE signal into separate Gigabit data and power sources in order to network a non-PoE device.
No need to install non-PoE devices near a power outlet. Save installation and equipment cost when installing access points, IP cameras, and more in a remote location. A handy toggle switch adjusts output power to 5V, 7.5V, 9V, or 12V in order to match non-PoE device power requirements. This compact splitter safeguards valuable network equipment with short circuit protection. Quickly create an integrated PoE and non-PoE network at Gigabit speeds.
- Used to install a non-PoE device in remote locations
- Splits a networked PoE signal into separate power and Gigabit data sources
- Set the output power to either 5V, 7.5V, 9V, or 12V
- Use this compact device with TRENDnet PoE switches or injectors
Save on installation and equipment costsFeature :
- Converts non-PoE devices with Power over Ethernet support
- 1 x 10/100/1000Mbps PoE Auto-MDIX Data In port
- 1 x 10/100/1000Mbps Auto-MDIX Data Out port
- Power out port
- 1 x 33cm (13”) jumper cable with a 2.0mm connection to the splitter and 2.0mm pin connection to powered device
- 1 x 33cm (13”) jumper cable with a 2.0mm connection to the splitter and 2.5mm pin connection to powered device
- For a product with a 1mm pin power connection, use this product with TRENDnet’s TV-JC35 (3.5mm to 1mm Jumper Cable)
- Power LED indicator
- Install non-PoE devices where a power outlet is not available
- Reduce installation and network equipment costs
- Safeguards network device with short circuit protection
- Adjustable output DIP switch 5V, 7.5V, 9V, and 12V adjustable output
- Auto-sensing power drawn from 802.3af power source equipment(PSE) devices
- Light weight and compact size
- Wall mounting points
- 3-year limited warranty
Diagram :
Hardware
- Standard
- IEEE 802.3 10Base-T
- IEEE 802.3u 100Base-TX
- IEEE 802.3ab Gigabit Ethernet
- IEEE 802.3x Flow Control
- IEEE 802.3af Power over Ethernet
- Network Media
- 10Mbps: UTP/STP Cat. 5 Up to 100 meters
- 100Mbps: UTP/STP Cat. 5 and 5e Up to 100 meters
- Gigabit: UTP/STP Cat. 5e and 6 Up to 100 meters
- Ports
- 1 x 10/100/1000Mbps Data and Power In
- 1 x 10/100/1000Mbps Data Out
- 1 x 5.5mm pin Power Out
- Switch
- Adjustable output power DIP switch (5V, 7.5V, 9V, 12V)
- Power
- Power In: 48VDC 0.4A
- Power Out: 5V(2A), 7.5V(2A), 9V(1.7A), 12V(1.5A)
- Power Consumption
- Max. 0.3 watt
- Jumper Cable
- 1 x (2.0 x 2.0mm)
- 1 x (2.5 x 2.0mm)
- Dimensions
- 70 x 55 x 27mm (2.75 x 2.2 x 1 in.)
- Weight
- 65 g (2.3 oz.)
- Temperature
- Operation: 0°C~45°C (32°F~ 113°F)
- Storage: -20°C~90°C (-4°F~194 °F)
- Humidity
- Max. 90% (non-condensing)
- Certifications
- CE, FCC