TRENDnet TPE-113GI Gigabit Power over Ethernet (PoE) Injector

Posted on by

TPE-113GI-1  The Gigabit Power over Ethernet Injector, model TPE-113GI, combines electrical power with a Gigabit network connection to produce a Gigabit Power over Ethernet (PoE) signal. Connect this device to a non-PoE switch and then run an Ethernet cable for up to 100 meters (328 Ft.) to network PoE devices.

No need to buy a PoE switch—use an existing open port from a non-PoE switch to save installation and equipment costs when installing TRENDnet PoE access points and IP cameras in remote locations. This compact device safeguards valuable network equipment with short circuit protection. Quickly create an integrated PoE and non-PoE network at Gigabit speeds.

  • Full Duplex Gigabit speeds supported
  • Use non-PoE switches to network PoE devices at distances of up to 100 meters (328 feet)
  • Save on installation and equipment costs
  • Create an integrated PoE and non-PoE Gigabit network

TPE-113GI-2Feature :

  • IEEE 802.3ab Gigabit and 802.3af PoE compliant
  • Gigabit Power over Ethernet (PoE) Injector delivers a PoE signal for distances of up to 100 meters (328 ft.)
  • 1 x 10/100/1000 Mbps Auto-MDIX Data In port
  • 1 x 10/100/1000 Mbps PoE Auto-MDIX Data Out port
  • Power port
  • Power LED indicator
  • Supplies power up to 15.4 Watts
  • Easily install a PoE device where a power outlet is not available
  • Reduce installation and network equipment costs
  • Safeguards network devices with short circuit protection
  • Plug and Play in remote location
  • Light weight and compact size
  • Wall mounting points
  • 3-year limited warranty

Diagram :

Diagram TPE-113GISpecification :

Hardware

  • Standard
    • IEEE 802.3 10Base-T
    • IEEE 802.3u 100Base-TX
    • IEEE 802.3ab Gigabit Ethernet
    • IEEE 802.3af Power over Ethernet
  • Network Media
    • 10 Mbps: UTP/STP Cat. 5 and 5e up to 100 Meters
    • 100 Mbps: UTP/STP Cat. 5, and 5e up to 100 Meters
    • Gigabit: UTP/STP Cat 5e and 6 up to 100 meters
  • Ports
    • 1 x 10/100/1000 Mbps DATA-IN (Data only)
    • 1 x 10/100/1000 Mbps PWR+DATA OUT (Data + Power)
  • Data Lines
    • Pair 1: Pin 1, 2
    • Pair 2: Pin 3, 6
  • Power
    • Input: 100~240V, 50~60Hz, 0.4A max.
    • Output: 48V DC, 0.4A 18W max.
  • Power Consumption
    • 15.4 Watts (max.)
  • Dimensions (W x D x H)
    • 70 x 45 x 25mm (2.75 x 1.8 x 1 in.)
  • Weight
    • 45 g (1.6 oz.)
  • Temperature
    • Operation: 0°C~50°C (32°F~ 122°F)
    • Storage: -20°C~60°C (-4°F~140 °F)
  • Humidity
    • Max. 90% (non-condensing)
  • Certifications
    • CE, FCC

Related Posts