TRENDnet TFC-1000S20 Intelligent 1000Base-T to 1000Base-FX Single Mode SC Fiber Converter

by | Feb 3, 2015 | Fiber Optic, Trendnet

TFC-1000S20The TFC-1000S20 Intelligent Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Single Mode SC-Type fiber converter that supports SNMP and spans distances up to 20km (12.4 miles). Ports include 1 x 1000Base-T (RJ-45) port and 1 x 1000Base-LX (SC-Type) port.

  • SC-type single-mode fiber port connects over distances of up to 20km
  • 1000Base-T Gigabit copper port supports Full-Duplex mode
  • Supports port level SNMP management
  • Functions as a stand alone converter or with the TFC-1600 fiber chassis

Feature :

  • Compliant with IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX standards
  • 1 x 1000Base-T RJ-45 port
  • 1 x 1000Base-LX single-mode SC type fiber port
  • Provides Dip switch to set: Fiber (Forced/Auto-Negotiation), LLR (Enable/Disable)
  • Support LLCF (Link Loss Carry Forward, Link Pass Through)
  • Support LLR (link Loss Return) for Fiber port
  • Monitor and configure Ethernet or Fiber’s duplex mode, LLR, port on/off and receive link down information via management module TFC-1600MM and chassis TFC-1600
  • Status LED indicators for Power and Link/Activity
  • Wall mountable
  • Optional 19” system chassis with redundant power supply (TFC-1600), holds up to 16 TFC series Media Converters
  • 3-year limited warranty

Specification :

Hardware

  • Standards:
    • IEEE 1000Base-TX and 1000Base-LX
  • Supported Frame Size:
    • No limitation (Standard Ethernet and Jumbo Frame)
  • Network Media:
    • 1000Base-TX: Cat. 5, EIA/TIA-568 100-ohm UTP/STP, up to 100 meters.
    • 1000Base-SX: Multi-Mode fiber optic cable 50/125 µm up to 550 meters. 62.5/125 µm up to 220 meters
    • 1000Base-LX: Single-Mode fiber optic cable 9/125 or 10/125 µm, up to 20 Km
  • Wavelength:
    • 1300nm
  • Protocol:
    • CSMA/CD
  • Ports:
    • 1 x 1000Base-T and 1 x 1000Base-LX
  • Data Transfer Rate:
    • 1000Mbps
  • Diagnostic LEDs:
    • Power, Link/Activity, Full-Duplex, and Speed
  • Power Adapter:
    • 7.5VDC, 1.5A (7.2 watts max.)
  • Temperature:
    • Operating: 0° ~ 40° C (32° ~ 104° F)
    • Storage: -25° ~ 70° C (-13° ~ 158° F)
  • Humidity:
    • Operating: 10% ~ 90%,
    • Storage: 5% ~ 90% (non-condensing)

Related Posts