The TFC-1000S10D5 Bi-Directional Intelligent Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Dual Wavelength Single Mode SC-Type fiber converter that supports port-based SNMP reporting and spans distances up to 10km (6.2 miles). This module must be used with the TFC-1000S10D3 module. Ports include 1 x 1000Base-T (RJ-45) port and 1 x 1000Base-LX (SC Simplex Type) port.
- Must use with TFC-1000S10D3
- SC-type dual-wavelength single-mode fiber port connects over distances of up to 10km(6.2miles)
- 1000Base-T Gigabit copper port supports Full-Duplex mode
- Supports port level SNMP management
- Functions as a stand alone converter or with the TFC-1600 fiber chassis
Feature :
- Compliant with IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX standards
- 1 x 1000Base-T RJ-45 port
- 1 x 1000Base-LX single-mode bi-directional simplex-SC type fiber port
- Provides Dip switch to set: Fiber (Forced/Auto-Negotiation), LLR (Enable/Disable)
- Support LLCF (Link Loss Carry Forward, Link Pass Through)
- Support LLR (link Loss Return) for FX port
- Monitor and configure Ethernet or Fiber’s duplex mode, LLR, port on/off and receive link down information via management module TFC-1600MM and chassis TFC-1600
- Status LED indicators for Power and Link/Activity
- Wall mountable
- Optional 19” system chassis with redundant power supply (TFC-1600), holds up to 16 TFC series Media Converters
- 3-year limited warranty
Specification :
Hardware
- Standard
- IEEE802.3ab 1000Base-T, IEEE 802.3z 1000Base-LX
- Supported Frame Size
- Standard Ethernet up to 10Kbytes
- Network Media
- 1000Base-T: Cat. 6 EIA/TIA-568 100-ohm UPT/STP, up to 100m
- 1000Base-LX: Single-mode fiber optic cable 10/125 µm, up to 10km
- Protocol
- CSMA/CD
- Ports
- 1 x 1000Base-T
- 1 x 1000Base-LX (simplex SC-type)
- Dip Switch
- Fiber (forced/auto-negotation), LLR (enable/disable)
- Transfer Rate
- 2000Mbps (full-duplex)
- Diagnostic LED
- Per Unit: power
- Per Port: link/activity
- Power Adapter
- 7.5V DC, 1A external power adapter
- Power Consumption
- 2.7 Watts (max)
- Dimensions
- 120 x 88 x 25mm (4.7 x 3.46 x 0.98 in.)
- Weight
- 354g (12.5oz)
- Temperature
- Operating: 0° ~ 40° C (32° ~ 104° F)
- Storage: -25° ~ 70° C (-13° ~ 158° F)
- Humidity
- Max. 90% (non-condensing)
- Certification
- CE, FCC
- Model Name
- TFC-1000S10D5
- Media
- SMF
- Wavelength
- TX: 1550nm
- RX: 1310nm
- Pout (dBm)
- -9 ~ -3
- Sensitivity
- -21 ~ -3
- Power
- 12
- Distance
- 10m