TRENDnet’s plenum rated business class N300 High Power PoE Access Point, model TEW-735AP, greatly increases wireless coverage as compared to standard access points. A variety of installation scenarios are supported with Access Point, WDS AP, WDS Bridge, and Repeater modes. Save installation time and costs with PoE.
Feature :
| Installation | |
| Quick Setup Get up and running in minutes with an intuitive guided setup |
|
| Plenum Rated Plenum rating expands installation options |
|
| Housing Off white color and smoke detector shape blends into most environments |
|
| Power over Ethernet (PoE) Save installation time and costs with PoE (Optional power port for non-PoE installations) |
|
| LED Control Disable diagnostic LEDs to further reduce visual attention |
|
| Performance | |
| Wireless Coverage High power radio greatly expands wireless coverage |
|
| Wireless Speed Proven 300 Mbps wireless N |
|
| Backward Compatible Compatible older wireless G devices |
|
| Management | |
| Operation Modes Access Point, WDS AP, WDS Bridge, and Repeater modes |
|
| IPv6 IPv6 pass through support |
|
| SSIDs Create up to four wireless virtual LANs (SSIDs) |
|
| System Log System log aids network troubleshooting |
|
| SNMP Extend network monitoring to this device with SNMP support |
|
| Security | |
| Encrypted Wireless Support for encryption up to WPA2 |
|
| VLAN Management Up to four SSIDs with VLAN management support |
|
| Network Access Cre |
|
Diagram :
Specification :
- Standards
- IEEE 802.3
- IEEE 802.3u
- IEEE 802.3x
- IEEE 802.3af
- IEEE 802.11b
- IEEE 802.11g
- IEEE 802.11n (up to 300 Mbps)
- IEEE 802.11az
- Device Interfaces
- 1 x 10/100 Mbps PoE LAN port
- Optional power port
- Mounting points
- LED indicators
- Wireless
- Modes: AP, Repeater, WDS AP, and WDS Bridge
- Up to 4 SSIDs
- Security
- Wireless encryption up to WPA2
- MAC address filtering
- Special Features
- High power wireless radio
- Plenum rated
- VLAN tag support
- SNMP v1, v2c
- Disable LEDs
- IPv6 ready
- Discrete housing
- Antenna Gain
- 4 dBi internal PIFA x 2
- Wireless Output Power / Receiving Sensivity
- 802.11b: FCC: 26 dBm (typical), CE: 20 dBm (typical) / -82 dBm (typical) @ 11 Mbps
- 802.11g: FCC: 23 dBm (typical) , CE: 20 dBm (typical) / -72 dBm (typical) @ 54 Mbps
- 802.11n: FCC: 23 dBm (typical) , CE: 20 dBm (typical) / -66 dBm (typical) @ 300 Mbps
- Power
- Input: 100 – 240 V AC, 50 – 60 Hz
- Output: 12 V DC, 1 A
- PoE power (with optional power adapter)
- Consumption: 6 Watts (Max.)
- Operating Temperature
- 0 – 45°C (32 – 113°F)
- Operating Humidity
- Max. 90% non-condensing
- Certifications
- CE
- FCC
- Dimensions
- 128 x 60 mm (5 x 2.4 in.)
- Weight
- 210 g (7.0 oz.)
- Warranty
- 3 year limited

