TRENDnet’s Network Cable Tester, model TC-NT2, is a comprehensive cable tester for network professionals. It accurately checks pin configurations for Ethernet cables, USB cables, BNC cables, and patch panel ports. The TC-NT2 identifies proper, severed, short circuit, and cross connected pins for cable distances of up to 300 meters (984 ft.). All components fit into a handy travel case.
- Comprehensive cable tester for network professionals
- Tests Ethernet, USB, and BNC cables
- Accurately test pin configurations for cable lengths up to 300 meters (984 ft.)
- Identifies severed, short circuit, and cross connected pins
- Continuous scan and manual scan modes
- Includes BNC to Ethernet converters
- Handy travel case
Hardware | |
Local and Remote Testing A transmitter unit facilitates loop testing and a receiver unit allows for cable testing in locations away from the transmitter unit |
|
Continuous Scan Continuous scan mode is design to accommodate testing with cable ends in different locations |
|
Manual Scan Manual scan is well suited for loop back cable testing |
|
Cables and Ports Accurately check pin configurations for Ethernet cables, USB cables (with TC-NTUF sold separately), BNC cables, and patch panel ports |
|
Cable Distance Tests over cables lengths of up to 300 meters (984 ft.) |
|
PIN Tests Identifies proper, severed, short circuit, and cross connected pins |
Specification :
- Test Pin Configuration
- 10/100/1000 Base-T, 10 Base-2 (Coax)
- RJ-11/RJ-12/RJ-45
- EIA/TIA-356A/568A/568B
- Token ring cables
- Compatible Cables*
- Cat 7, 6, 6e, 6a, 5, 5e, 4, 3, 3e
- Coax cable
- USB and 1394 cable (with TC-NTUF)
- Transmitter Unit Interface
- 2 x test ports
- Manual test button
- Auto test button
- Power/tone switch
- LED indicators
- Receiver Unit Interface
- Test port
- LED indicators
- Tone Frequency
- 600 – 800 Hz
- Special Features
- Test grounding of shielded (screened) cable
- Identifies proper, severed, short circuit, and cross connected pins
- Build-in tone generator for tracing cable with standard Tone Probe (TC-TP1)
- Test USB and IEEE 1394 cables with optional adapters (TC-NTUF not included)
- Power Source
- Transmitter: 9 V DC battery (not included)
- Receiver: powered by master transmitter via connected cable
- Operating Temperature
- 0 – 50°C (32 – 122°F)
- Operating Humidity
- Max. 95% non-condensing
- Certifications
- CE
- Dimensions
- Transmitter: 117 x 67 x 27 mm (4.6 x 2.6 x 1.1 in.)
- Receiver: 117 x 32 x 27 mm (4.6 x 1.3 x 1.1 in.)
- Weight
- Transmitter: 108 g (3.8 oz.)
- Receiver: 44 g (1.6 oz.)
- Warranty
- 1 year limited