Oring TGPS-9084GT-M12ORing’s TransporterTM series managed Ethernet switches are designed for industrial applications such as rolling stock, vehicle, and railway. The TGPS-9084GT-M12-BP2, which is compliant with the EN50155 standard, is a managed Gigabit Redundant Ring Ethernet switch with 8×10/100/1000Base-T(X) P.S.E. ports and 4×10/100/1000Base-T(X) none PoE ports (4 of these ports also double as 2 sets of bypass ports). The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) , Open-Ring, O-Chain, MRP and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. It is specifically designed for the toughest industrial environments. TGPS-9084GT-M12-BP2 EN50155 Ethernet switch uses M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. TGPS-9084GT-M12-BP2 also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each TGPS-9084GT-M12-BP2 switch has 8×10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. TGPS-9084GT-M12-BP2 includes 2 sets of bypass ports that protect the network from failures and Network maintenance by ensuring network integrity during power loss. And support wide operating temperature from -40 oC to 70 oC. TGPS-9084GT-M12-BP2 can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Ethernet application.

Feature :

  • Leading EN50155-compliant Ethernet switch for rolling stock application
  • Support O-Ring (recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy
  • Open-Ring support the other vendor’s ring technology in open architecture
  • O-Chain allow multiple redundant network rings
  • Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function
  • 8 port P.S.E. fully compliant with IEEE802.3at standard, provide up to 30
  • Watts per port with 120Watts total power budget
  • Support PoE scheduled configuration and PoE auto-ping check function
  • Support IEEE 1588v2 clock synchronization
  • Support IPV6 new internet protocol version
  • Support Modbus TCP protocol
  • Support IEEE 802.3az Energy-Efficient Ethernet technology
  • Provided HTTPS/SSH protocol to enhance network security
  • Support SMTP client
  • Support IP-based bandwidth management
  • Support application-based QoS management
  • Support Device Binding security function
  • Support DOS/DDOS auto prevention
  • IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
  • Support SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
  • Support ACL, TACACS+ and 802.1x User Authentication for security
  • Supports 9.6K Bytes Jumbo Frame
  • Multiple notification for warning of unexpected event
  • Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration
  • Support LLDP Protocol
  • Rigid IP-40 housing design
  • Built-in 2 sets of bypass ports
  • Wall mounting enabled

Specification :

ORing Switch Model TGPS-9084GT-M12 TGPS-9084GT-M12-24V TGPS-9084GT-M12-BP2 TGPS-9084GT-M12-BP2-24V
Physical Ports
10/100/1000Base-T(X) with P.S.E. Ports in RJ45 Auto MDI/MDIX 8 (8-Pin A-coding)
10/100/1000Base-T(X) ports in M12 Auto MDI/MDIX 4 (8-Pin A-coding) 4 (8-pin A-coding with 2 x bypass function included)
Technology
Ethernet Standards IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table 8k
Processing Store-and-Forward
Priority Queues 8
Switch Properties Switching latency: 7 us
Switching bandwidth: 24Gbps
Max. Number of Available VLANs: 256
IGMP multicast groups: 128 for each VLAN
Port rate limiting: User Define
Security Features Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security
Jumbo frame Up to 9.6K Bytes
Software Features STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client/Relay
SMTP Client
Modbus TCP
Network Redundancy O-Ring
Open-Ring
O-Chain
MRP
MSTP(RSTP/STP compatible)
RS-232 Serial Console Port RS-232 in 5-pin M12 connector with console cable. 115200bps, 8, N, 1
LED Indicators
Power Indicator Green : Power LED x 2
Ring Master Indicator (R.M.) Green : Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator (Ring) Green : Indicates that the system operating in O-Ring mode
Green Blinking : Indicates that the Ring is broken.
Fault Indicator (Fault) Amber : Indicate unexpected event occurred
10/100/1000Base-T(X) M12 P.S.E. Top Green LED for port Link/Act indicator.
10/100/1000Base-T(X) M12 Port
Indicator
Top Green LED for Link/Act indicator
Bottom dual color LED for Ethernet speed indicator : Green LED for 1000Mbps, Amber for 100Mbps
PoE Indicator Middle Green LED for PoE enable indicator
Bottom dual color LED for Ethernet speed indicator : Green LED for 1000Mbps, Amber for 100Mbps
Fault contact
Relay Relay output to carry capacity of 3A at 24VDC on M12 connector (A-coding)
Power
Redundant Input power Dual DC inputs. 50~57VDC on 5-pin M23 connector Dual DC inputs. 24 (12~57VDC) VDC on 5-pin M23 connector Dual DC inputs. 50~57VDC on 5-pin M23 connector Dual DC inputs. 24 (12~57VDC) VDC on 5-pin M23 connector
Total PoE Output Power 240 Watts 60 Watts (12~24VDC) / 120 Watts (24~57VDC) 240 Watts 60 Watts (12~24VDC) / 120 Watts (24~57VDC)
Power Consumption (Type.) 18 Watts (power consumption of P.S.E. is not included) 23 Watts (power consumption of P.S.E. is not included) 18 Watts (power consumption of P.S.E. is not included) 23 Watts (power consumption of P.S.E. is not included)
Overload current protection Present
Reverse Polarity Protection Not Present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 260 (W) x 91.3 (D) x216 (H) mm
Weight (g) 2240 g 2356 g 2262 g 2378 g
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory approvals
EMI FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
EMS EN61000-4-2 (ESD)
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-31
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 5 years