Oring TGPS-1080-M12-24V EN50155 8-port unmanaged Gigabit PoE Ethernet switch with 8×10/100/1000Base-T(X) P.S.E., M12 connector, 24VDC power inputs

by | May 4, 2015 | ORing, Transpoter Ethernet Switch

Oring TGPS-1080-M12-24VORing’s TransporterTM series un-managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications.  The TGPS-1080-M12-24V is an un-managed PoE Ethernet switch with 8×10/100/1000Base-T(X) P.S.E. which is specifically designed for the toughest and fully compliant with EN50155 requirement.  TGPS-1080-M12-24V also supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network.  Each TGPS-1080-M12-24V switch has 8X10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports.  P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup.  TGPS-1080-M12-24V EN50155 Ethernet switch use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock.  In addition, the wide operating temperature range from -40 oC to 70oC can satisfy most of operating environment.  Therefore, the switch is one of the most reliable choices for rolling stock and highly-managed PoE Ethernet application.

Feature :

  • Leading EN50155-compliant Ethernet switch for rolling stock application
  • Provide 8×10/100/1000Base-T(X) PoE (P.S.E.) ports
  • Supports IEEE 802.3at compliant PoE and total power budget is 120Watts with maximum 30Watts per port
  • Support dual power inputs for power redundancy
  • Support auto-negotiation and auto-MDI/MDI-X
  • Support store and forward transmission
  • Support flow control
  • M12 connectors to guarantee reliable operation against environmental disturbances
  • Rigid IP-40 housing design
  • Wall mounting enabled

Specification :

ORing Switch Model

TGPS-1080-M12-24V
Physical Ports
 10/100/1000Base-T(X) Ports in M12With P.S.E. 8 x M12 connector (8-pin A-coding)
Technology
Ethernet Standards IEEE 802.3 for 10Base-TIEEE 802.3u for 100Base-TXIEEE 802.3ab for 1000Base-T

IEEE 802.3x for Flow control

IEEE 802.3at compliant PoE specification (total power budget is 120Watts with maximum 30Watts per port)
MAC Table 8K MAC addresses
Processing Store-and-Forward
LED Indicators
Power Indicator Green : Power LED x 3
Fault indicator Amber : Indicate PWR1 or PWR2 failure
10/100/1000Base-T(X) RJ45 port indicator and PoE indicator Top Green for port Link/Act indicatorMiddle Amber for Duplex / Collision indicatorBottom Blue for PoE Injected indicator
Fault Contact
Relay Relay output to carry capacity of 3A at 24VDC on M12 connector (5-pin A-coding)
Power
Redundant Input power Dual DC inputs. 24VDC (12 ~ 57VDC) on 5-pin M23 connector
Power Consumption (Typ.) 11 Watts (power consumption of P.S.E. is not included)
PoE Output Power 60 Watts (12~24VDC) / 120 Watts (24~57VDC)
Overload Current Protection Present
Reverse Polarity Protection NOT Present
Physical Characteristic
Enclosure IP-40
Dimension (W x D x H) 125 (W) x 65 (D) x 196 (H) mm
Weight (g) 988 g
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory approvals
EMI FCC FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 5 years

Related Posts