ORing’s TransporterTM series access point is designed for industrial and rolling stock wireless applications, such as vehicle, and railway applications. TAP-620-M12 is a reliable 802.11 a/b/g/n WLAN Access Point with 2 Ethernet 10/100 ports. It can be configured to operate in AP/Client /Bridge /AP-Client Mode. TAP-620-M12 provides dual Ethernet ports in switch mode, so that you can use Daisy Chain to reduce the usage of Ethernet switch ports. TAP-620-M12 provides a dust-tight connection and reverses SMA-type connectors that can install any reverse SMA-type antennas to extend communication distance. It is specifically designed for the toughest industrial environments. You are able to configure TAP-620-M12 by WEB interface via LAN port or WLAN interface. TAP-620-M12 can be easily adopted in almost all kinds of applications and provides the most rugged solutions for managing your network in outdoor. Therefore, TAP-620-M12 is one of the best communication solutions for wireless applications.
Feature :
- High Speed Air Connectivity: WLAN interface support up to 300 Mbps link speed
- Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
- Support X-Roaming < 100 ms
- Support wireless load balance
- Support external SMA antenna installation
- Support AP/Client /Bridge /AP-Client Mode
- Support MAC Filter
- Dual Ethernet ports support Ethernet redundant mode (Recovery time < 10ms) and switch mode in M12 connector (D-coding)
- Wireless connecting status monitoring
- Secured Management by HTTPS
- Event Warning by Syslog, Email, SNMP Trap, and Relay output
- Rigid IP-40 housing design
- Wall-mount enabled
Specification :
| ORing EN50155 Access Point Model | TAP-620-M12 |
| Physical Ports | |
| 10/100Base-T(X) Ports in M12 Auto MDI/MDIX | 2 (4-pin M12 connetor – D-coding) |
| WLAN Interface | |
| Operating Mode | AP/Client/Bridge/Repeater/AP-Client |
| Antenna and Connector | 2 x 2 dBi (2.4GHz) / 3dBi (5GHz) on Reverse SMA connector |
| Radio Frequency Type | DSSS, OFDM |
| Modulation | IEEE802.11a/n: OFDM with BPSK, QPSK, 16QAM, 64QAM IEEE802.11b: CCK, DQPSK, DBPSK IEEE802.11g/n: OFDM with BPSK, QPSK, 16QAM, 64QAM |
| Frequency Band | America / FCC: 2.412~2.462 GHz (11 channels ) 5.180~5.240 GHz & 5.745~5.825 GHz ( 9 channels ) Europe CE / ETSI: 2.412~2.472 GHz ( 13 channels ) 5.180~5.240 GHz ( 4 channels ) Japan(JP): 2.412~2.484 GHz ( 13 channels ) 5.180~5.240 GHz ( 4 channels ) |
| Transmission Rate | IEEE802.11b: 1/2/5.5/11 Mbps IEEE802.11a/g: 6/9/12/18/24/36/48/54 Mbps IEEE802.11n(40MHz): UP to 300 Mbps |
| Transmit Power | IEEE802.11a:13dBm ±1.5dBm IEEE802.11b:16dBm ±1.5dBm IEEE802.11g:14dBm ±1.5dBm IEEE802.11n(2.4G@20MHz):13dBm ±1.5dBm IEEE802.11n(2.4G@40MHz):12dBm ±1.5dBm IEEE802.11n(5G@20MHz):12dBm ±1.5dBm IEEE802.11n(5G@40MHz):12dBm ±1.5dBm |
| Receiver Sensitivity | IEEE802.11a: -68dBm ±2dBm@54Mbps IEEE802.11b: -82dBm ±2dBm@11Mbps IEEE802.11g: -68dBm ±2dBm@54Mbps IEEE802.11n(2.4G@20MHz,MCS15): -64dBm ±2dBm IEEE802.11n(2.4G@40MHz,MCS15): -60dBm ±2dBm IEEE802.11n(5G@20MHz,MCS15): -64dBm ±2dBm IEEE802.11n(5G@40MHz,MCS15): -60dBm ±2dBm |
| Encryption Security | WEP : (64-bit ,128-bit key supported) WPA / WPA2 : 802.11i(WEP and AES encryption) WPA-PSK (256-bit key pre-shared key supported) 802.1X Authentication supported TKIP encryption |
| Wireless Security | SSID broadcast disable |
| Protocol Support | |
| Protocol | ARP,BOOTP, DHCP, DNS, HTTP, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, PPPoE, STP (IEEE 802.1D) |
| LED Indicators | |
| Power Indicator | 2 x LEDs, Green for Power Indicator |
| 10/100Base-T(X) Port Indicator | 2 x LEDs, Green for port Link/Act at 100Mbps, Amber for port Link/Act at 10Mbps |
| WLAN LEDs | 1 x LEDs, Green for WLAN Link /Act |
| Fault Indicator | 1 x LED, Red for Ethernet link down or power down indicator |
| Fault contact | |
| Relay | Relay output to carry capacity of 3A at 24VDC(5-pin M12 A-Coding) |
| Power | |
| Redundant Input Power | Dual Power Inputs. 12~48 VDC on 5-pin M23 connector (24 VDC Typ.) |
| Power Consumption (Typ.) | 8W |
| Overload Current Protection | Present |
| Reverse Polarity Protection | Present |
| Physical Characteristic | |
| Enclosure | IP-40 |
| Dimension (W x D x H) | 125(W) x 65(D) x 196(H) mm (4.92 x 2.56 x 7.72 inch.) |
| Weight (g) | 825g |
| Environmental | |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Operating Temperature | -10 to 60°C (14 to 140°F) |
| Operating Humidity | 5% to 95% Non-condensing |
| Regulatory approvals | |
| EMI | FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2) |
| EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27, EN61373 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 , EN61373 |
| Safety | EN60950-1 |
| Warranty | 3 years |