Oring RGS-7244GP-ERGS-7244GP series are the managed redundant ring Ethernet switches with 24×10/100/1000Base-(TX) ports and 4x1000Base-X SFP ports. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. ORing’s thunder switch series provide advanced IP-based bandwidth management which can limit the maximum bandwidth for each IP device. User can configure IP camera and NVR with more bandwidth and limit other device bandwidth. ORing’s Thunder Series Ethernet switches also support application-based QoS. Application-based QoS can set highest priority for data stream according to TCP/UDP port number. ORing’s special Device Binding function can permit only allowed IP address with MAC address to access the networking. Hacker cannot access the IP surveillance network without permission. It can avoid hacker from stealing video privacy data and attacking IP camera, NVR and controllers. ORing’s thunder series switch also provided advanced DOS/DDOS auto prevention. If there is any IP flow become big in short time, ORing’s thunder switch will lock the source IP address for certain time to prevent the attack. It is hardware-based prevention so it can prevent DDOS attack immediately and completely. And all functions of RGS-7244GP can also be managed centralized and convenient by Open-Vision v3.0, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Gigabit Fiber Ethernet application.

Feature :

  • Support 24×10/100/1000Base-T(X) and 4x1000Base-X SFP ports
  • Support Jumbo frame up to 9.6K Bytes
  • Supports O-Ring (recovery time < 30ms over 250 units of connection), MSTP/RSTP/STP (IEEE     802.1s/w/D) for Ethernet Redundancy
  • Open-Ring support the other vendor’s ring technology in open architecture
  • O-Chain allow multiple redundant network rings
  • Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function
  • Provide Fast recovery technology for Ethernet multi-redundancy
  • Supports IPV6 new internet protocol version
  • Supports IP-based bandwidth management
  • Supports application-based QoS management
  • Supports Device Binding security function
  • Supports DOS/DDOS auto prevention
  • IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
  • Supports SNMP v1/v2c/v3, RMON and 802.1Q VLAN Network Management
  • Support ACL, 802.1x User Authentication for security
  • Multiple notification for warning of unexpected event
  • Windows utility (Open-Vision v3.0) support centralized management and configurable by Web-based     interface, Telnet and Console (CLI)
  • Support LLDP Protocol
  • Event notification through Syslog, Email, SNMP trap, and Relay Output (for –E module)
  • 19 inches rack mountable design

Specification :

ORing Switch Model RGS-7244GP RGS-7244GP-E
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 24
1000Base-X SFP Port 4
Technology
Ethernet Standards IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 8K
Priority Queues 4
Processing Store-and-Forward
Switch Properties Switching latency: 7 μs
Switching bandwidth: 56Gbps
Max. Number of Available VLANs: 256
IGMP multicast groups: 128 for each VLAN
Port rate limiting: User Define
Jumbo frame Up to 9K Bytes
Security Features IP Police security feature
Enable/disable ports, MAC based port security
Port-based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
RADIUS centralized password management
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 20ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Client/Server
Network Redundancy O-Ring
Open-Ring
O-Chain
Fast Recovery
STP
RSTP
MSTP
RS-232 Serial Console Port RS-232 in DB9 connector with console cable. 115200bps, 8, N, 1
LED Indicators
Power Indicator(PWR) Green : Power indicator for AC Green : Power indicator for AC and DC
Power-1 Indicator (PW1) N/A Green : Indicates Power-1 input
Power-2 Indicator (PW2) N/A Green : Indicates Power-2 input
Power-3 Indicator (PW3) N/A Green : Indicates Power-3 input
System Ready Indicator(STA) Green : Indicates that the system is ready. The LED is blinking when the system is upgrading firmware.
R.M. Indicator(R.M.) Green : Indicates that the system is operating in O-Ring Master mode.
O-Ring Indicator(Ring) Green : Indicates that the system is operating in O-Ring mode Blinking indicates that the Ring is broken.
Fault Indicator (Fault) N/A Amber : Indicates unexpected event occurred
Sysem Runnig Indicator (RUN) Green : System is operating continuously
Supervisor login indicator (RMT) Green : System is accessed remotely
Reset to Default running indicator (DEF) Green : System resets to default configuration
Ping command to the switch indicator (Ping) Green : System is processing “PING” request
10/100/1000Base-T(X) RJ45 port indicator Left Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator.Right Amber for full-duplex indicator.
1000Base-X SFP Fiber port indicator Green for port Link/Act.
Fault Contact
Relay N/A Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input Power 100~240VAC with power cord 100~240VAC with power cord, dual 36 ~ 72VDC power inputs at 6-pin terminal block
Power Consumption (Typ.) 36 Watts 36 Watts
Overload Current Protection Present
Physical Characteristic
Enclosure 19-inch rack-mountable
Dimension (W x D x H) 443.7(W) x 200(D) x 44mm(H) mm 431 (W) x 342 (D) x 44 (H) mm
Weight (g) 2700 g 4250g
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory approvals
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) 84,479
Warranty 5 years