Oring RGPS-7244GP-P Industrial 28-port rack mount managed Gigabit PoE Ethernet switch with 24×10/100/1000Base-T(X) P.S.E. and 4x1000Base-X, SFP socket

RGPS-7244GP series is managed Redundant Ring Ethernet switch with 24×10/100/1000Base-T(X) ports with PoE (P.S.E.) function and 4x1000Base-X SFP ports. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection), Open-Ring and MSTP/RSTP/STP (IEEE 802.1 s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. ORing’s thunder switch series provide advanced IP-based bandwidth management which can limit the maximum bandwidth for each IP device. User can configure IP camera and NVR with more bandwidth and limit other device bandwidth. ORing’s thunder switch series also support application-based QoS. Application-based QoS can set highest priority for data stream according to TCP/UDP port number. ORing’s special IP police function can only permit allowed IP address with MAC address to access the networking. Hacker cannot access the IP surveillance network without permission. It can avoid hacker from stealing video privacy data and attacking IP camera, NVR and controllers. ORing’s thunder series switch also provided advanced DOS/DDOS auto prevention. If there is any IP flow become big in short time, ORing’s thunder switch will lock the source IP address for certain time to prevent the attack. It’s hardware based prevention so it can prevent DOS/DDOS attack immediately and completely. RGPS-7244GP series also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each RGPS-7244GP series switch has 24X10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. All function of RGPS-7244GP series can be managed centralized and convenient by a powerful windows utility — Open-Vision v3.0 or above. Therefore, these switches are one of the most reliable choice for highlymanaged and Gigabit Fiber Ethernet application with PoE function.

Feature :

• Support 24×10/100/1000Base-T(X) ports and 4x1000Base-X SFP ports
• 24 port P.S.E. fully compliant with IEEE802.3at standard, provide up to 30 Watts per port
• Support Jumbo frame up to 9K Bytes
• Supports O-Ring (recovery time < 30ms over 250 units of connection), MSTP/RSTP/STP (IEEE     802.1s/w/D) for Ethernet Redundancy
• Supports IP-based bandwidth management
• Supports application-based QoS management
• Supports Device Binding security function
• Supports DOS/DDOS auto prevention
• IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
• Supports SNMP v1/v2c/v3, RMON and 802.1Q VLAN Network Management
• Support ACL, 802.1x User Authentication for security
• Multiple notification for warning of unexpected event
• Windows utility (Open-Vision 3.0 or above) support centralized management and configurable by Web-     based interface, Telnet and Console (CLI)
• Support LLDP Protocol
• Rigid IP-20 housing design
• DIN-Rail and wall mounting enabled

Specification :