Oring IPS-1080-24V Industrial 8-port unmanaged PoE Ethernet switch with 8×10/100Base-T(X) P.S.E., 24VDC power input

by | Jun 12, 2015 | ORing

Oring IPS-1080-24V

IPS-1080-24V is unmanaged PoE Ethernet switch with P.S.E. function. IPS-1080-24V supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1080-24V switch has 8X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.

Feature :

  • Provide 8×10/100Base-T(X) PoE (P.S.E.) ports
  • Supports IEEE 802.3at compliant PoE and total power budget is 120Watts with maximum 30Watts per port
  • Advanced PoE power boost technology to support dual 24VDC power inputs
  • Support auto-negotiation and auto-MDI/MDI-X
  • Support store and forward transmission
  • Support flow control
  • Warning system by relay output
  • Slim type rigid IP-30 housing design
  • DIN-Rail and wall mounting enabled

Specification :

ORing Switch Model IPS-1080-24V
Physical Ports
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX with P.S.E. 8
Technology
Ethernet Standards IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3x for Flow control
IEEE 802.3at PoE specification (toal power budget is 120Watts with maximum 30Watts per port)
MAC Table 2048 MAC addressessses
Processing Store-and-Forward
LED Indicators
Power Indicator Green : Power LED x 2
Fault Indicator Amber : Indicate PWR1 or PWR2 failure
10/100Base-T(X) RJ45 Port Indicator and PoE Indicator Green for port Link/Act.      Green for PoE power injected
DIP-Switch
DIP-Switch 1 Power-1 failed warning : (ON) enable / (OFF) disable
DIP-Switch 2 Power-2 failed warning : (ON) enable / (OFF) disable
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input Power Dual DC inputs. 24 ~ 36VDC on 6-pin terminal block
Power Consumption (Typ.) 4.32 Watts (Power consumption of P.S.E. not included)
Overload Current Protection Present
Reverse Polarity Protection NOT Present
Physical Characteristics
Enclosure IP-30
Dimensions (W x D x H) 41 (W) x 94.9 (D) x 144.3 (H) mm
Weight (g) 555g
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals
EMI FCC Part 15, CISPR (EN55022) class A, E-Mark
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 5 years

Related Posts