Oring IPS-1042FX-MM-SC-24V Industrial 6-port unmanaged PoE Ethernet switch with 4×10/100Base-T(X) P.S.E. and 2x100Base-FX, 24VDC power input

Posted on by

Oring IPS-1042FX-MM-SC-24VIPS-1042FX-24V series are unmanaged PoE Ethernet switches with 4 x 10/100Base-T(X) P.S.E. and 2x100Base-FX ports. IPS-1042FX-24V series supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1042FX-24V series has 4X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. IPS-1042FX-24V series support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70oC can satisfy most of operating environment.

Feature :

  • IPS-1042FX-24V series provide 4×10/100Base-T(X) PoE (P.S.E.) and 2x100Base-FX single/multi-mode fiber ports
  • Supports IEEE 802.3at compliant 30Watts PoE per port
  • Support auto-negotiation and auto-MDI/MDI-X
  • Support store and forward transmission
  • Support flow control
  • Support surge protection technology
  • Warning system by relay output
  • Slim type rigid IP-30 housing design
  • DIN-Rail and wall mounting enabled

Specification :

ORing Switch Model – IPS-1042FX-MM-SC-24V IPS-1042FX-SS-SC-24V
Physical Ports
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX with P.S.E. – 4 4
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX without P.S.E. – – –
Fiber Ports Number – 2 2
Fiber Ports Standard – 100Base-FX 100Base-FX
Fiber Mode – Multi-mode Single-mode
Fiber Diameter (μm) – 62.5/125 μm
50/125 μm		 9/125 μm
Fiber Optical Connector – SC SC
Fiber Ports Specifications Typical Distance (km) – 2 km 30 km
Wavelength (nm) – 1310 nm 1310 nm
Max. Output Optical Power (dBm) – -14 dBm -8 dBm
Min. Output Optical Power (dBm) – -23.5 dBm -15 dBm
Max. Input Optical Power(Saturation) – 0 dBm 0 dBm
Min. Input Optical Power (Sensitivity) – -31 dBm -34 dBm
Link Budget (dB) – 7.5 dB 19 dB
Technology
Ethernet Standards IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3x for Flow control
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table 2048 MAC addresses
Processing Store-and-Forward
LED Indicators
Power Indicator Green : Power LED x 2
Fault Indicator Amber : Indicates unexpected event occurred
10/100Base-T(X) RJ45 Port Indicator Green for port Link/Act. Amber for Link.        Green for PoE power injected
100Base-FX Fiber Port Indicator Green for port Link/Act.
Power
Redundant Input Power Dual DC power inputs. 24~36VDC on 6-pin terminal block
Power Consumption (Typ.) – 6.48 Watts (P.S.E. not included) 5.4 Watts (P.S.E. not included)
Overload Current Protection Present
Reverse Polarity Protection Present on terminal block
Physical Characteristics
Enclosure IP-30
Dimensions (W x D x H) 41 (W) x 94.9 (D) x 144.3 (H)mm (1.61 x 3.74 x 5.68 inch)
Weight (g) – 530 g 530 g
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1,
Warranty 5 years

Related Posts