IPS-1042FA series are unmanaged PoE Ethernet switches with 4 x 10/100Base-T(X) P.S.E. and 2x100Base-FX ports. IPS-1042FA series supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1042FA series has 4X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. IPS-1042FA series support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70oC can satisfy most of operating environment.
Feature :
- IPS-1042FA series provide 4×10/100Base-T(X) PoE(P.S.E.) and 2x100Base-FX single/multi-mode fiber ports
- Supports IEEE 802.3at compliant 30Watts PoE per port
- Support auto-negotiation and auto-MDI/MDI-X
- Support store and forward transmission
- Support flow control
- Support surge protection technology
- Warning system by relay output
- Slim type rigid IP-30 housing design
- DIN-Rail and wall mounting enabled
Specification :
| ORing Switch Model | – | IPS-1042FA-MM-SC | IPS-1042FA-SS-SC |
| Physical Ports | |||
| 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX with P.S.E. | – | 4 | 4 |
| 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX without P.S.E. | – | – | – |
| Fiber Ports Number | – | 2 | 2 |
| Fiber Ports Standard | – | 100Base-FX | 100Base-FX |
| Fiber Mode | – | Multi-mode | Single-mode |
| Fiber Diameter (μm) | – | 62.5/125 μm 50/125 μm |
9/125 μm |
| Fiber Optical Connector | – | SC | SC |
| Fiber Ports Specifications Typical Distance (km) | – | 2 km | 30 km |
| Wavelength (nm) | – | 1310 nm | 1310 nm |
| Max. Output Optical Power (dBm) | – | -14 dBm | -8 dBm |
| Min. Output Optical Power (dBm) | – | -23.5 dBm | -15 dBm |
| Max. Input Optical Power(Saturation) | – | 0 dBm | 0 dBm |
| Min. Input Optical Power (Sensitivity) | – | -31 dBm | -34 dBm |
| Link Budget (dB) | – | 7.5 dB | 19 dB |
| Technology | |||
| Ethernet Standards | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3x for Flow control IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.) |
||
| MAC Table | 2048 MAC addresses | ||
| Processing | Store-and-Forward | ||
| LED Indicators | |||
| Power Indicator | Green : Power LED x 2 | ||
| Fault Indicator | Amber : Indicates unexpected event occurred | ||
| 10/100Base-T(X) RJ45 Port Indicator | Green for port Link/Act. Amber for Link. Green for PoE power injected | ||
| 100Base-FX Fiber Port Indicator | Green for port Link/Act. | ||
| Power | |||
| Redundant Input Power | Dual DC power inputs. 50~57VDC on 6-pin terminal block | ||
| Power Consumption (Typ.) | – | 6.78 Watts (P.S.E. not included) | 5.65 Watts (P.S.E. not included) |
| Overload Current Protection | Present | ||
| Reverse Polarity Protection | Present on terminal block | ||
| Physical Characteristics | |||
| Enclosure | IP-30 | ||
| Dimensions (W x D x H) | 26.1 (W) x 94.9 (D) x 144.3 (H)mm (1.03 x 3.74 x 5.68 inch) | ||
| Weight (g) | – | 395 g | 395 g |
| Environmental | |||
| Storage Temperature | -40 to 85°C (-40 to 185°F) | ||
| Operating Temperature | -40 to 70°C (-40 to 158°F) | ||
| Operating Humidity | 5% to 95% Non-condensing | ||
| Regulatory Approvals | |||
| EMI | FCC Part 15, CISPR (EN55022) class A | ||
| EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 | ||
| Shock | IEC60068-2-27 | ||
| Free Fall | IEC60068-2-32 | ||
| Vibration | IEC60068-2-6 | ||
| Safety | EN60950-1, | ||
| Warranty | 5 years | ||