Oring IGS-1042GPA Industrial 6-port slim type unmanaged Gigabit Ethernet switch with 4×10/100/1000Base-T(X) and 2×100/1000Base-X, SFP socket

by | May 30, 2015 | ORing

Oring IGS-1042GPAIGS-1042GPA is an unmanaged Ethernet switch. IGS-1042GPA has 4×10/100/1000Base-T(X) and 2×100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGS-1042GPA supports wide range 12~48VDC power inputs.  The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for Ethernet application.

Feature :

  • Provide 4×10/100/1000Base-T(X) and 2×100/1000Base-X SFP ports
  • Supports Jumbo frame up to 9KBytes
  • SFP port support 100Base-FX and 1000Base-X speed
  • Support auto-negotiation and auto-MDI/MDI-X
  • Support store and forward transmission
  • Supports flow control
  • Rigid IP-30 housing design
  • DIN-Rail and wall mounting enabled

Specification :

ORing Switch Model IGS-1042GPA
Physical Ports
10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
100/1000Base-X SFP port 2
Technology
Ethernet Standards IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3z for 1000Base-X
IEEE 802.3x for Flow control
MAC Table 1K MAC addressessses
Processing Store-and-Forward
LED Indicators
Power indicator Green : Power LED x 2
Fault Indicator Amber : Indicates PWR1 or PWR2 failure occurred
10/100/1000Base-T(X) RJ45 port indicator Green for port Link/Act.    Amber for 100Mbps indicator
100/1000Base-X SFP port indicator (P5 ~ P6) Green for port Link/Act.
SFP Speed DIP-Switch
DIP-Switch 1/2 DIP-Switch 1 (ON) and DIP-Switch 2 (ON) : SFP speed setting to 100Mbps
DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) : SFP speed setting to 1000Mbps
Relay Output DIP-Switch
DIP-Switch 1 Power-1 failed warning : (ON) enable, (OFF) disable
DIP-Switch 2 Power-2 failed warning : (ON) enable, (OFF) disable
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input Power Dual DC inputs. 12~48VDC on 6-pin terminal block.
Power consumption (Typ.) 6.4 Watts
Overload current protection Present
Reverse polarity protection Present
Physical Characteristics
Enclosure IP-30
Dimensions (W x D x H) 26.1 (W) x 94.9 (D) x 144.3(H) mm (1.03 x 3.74 x 5.68 inches)
Weight (g) 410 g
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8,EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 5 years

Related Posts