Oring IGPS-1411GTPA Industrial 6-port slim type unmanaged Gigabit PoE Ethernet switch with 4×10/100/1000Base-T(X) P.S.E. and 1×10/100/1000Base-T(X) and 1x1000Base-X, SFP socket

by | Jun 10, 2015 | ORing

Oring IGPS-1411GTPA

IGPS-1411GTPA is an unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1411GTPA support Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1411GTPA has 4X10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.

Feature :

  • IGPS-1411GTPA provide 4×10/100/1000Base-T(X) PoE (P.S.E.) ports
  • Support P.S.E. based on IEEE 802.3at standard up to 30 Watts per port
  • SFP port support 100Base-FX and 1000Base-X speed
  • Supports Jumbo frame up to 9KBytes
  • Support auto-negotiation and auto-MDI/MDI-X
  • Support store and forward transmission
  • Supports flow control
  • Rigid IP-30 housing design
  • DIN-Rail and wall mounting enabled

Specification :

ORing Switch Model IGPS-1411GTPA
Physical Ports
10/100/1000Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX 4
10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX 1
100/1000Base-X SFP port 1
Technology
Ethernet Standards IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table 1K MAC addressessses
Processing Store-and-Forward
LED Indicators
Power indicator Green : Power LED x 2
Fault Indicator Amber : Indicates PWR1 or PWR2 failure occurred
10/100/1000Base-T(X) RJ45 port indicator and PoE indicator (P1 ~ P4) Green for port Link/Act.
Green for PoE power injected
10/100/1000Base-T(X) RJ45 port indicator (P5) Green for port Link/Act.
Amber for 100Mbps indicator
100/1000Base-X SFP port indicator (P6) Green for port Link/Act.
SFP Speed DIP-Switch
DIP-Switch 1/2 DIP-Switch 1 (ON) and DIP-Switch 2 (ON) : SFP speed setting to 100Mbps
DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) : SFP speed setting to 1000Mbps
Relay Output DIP-Switch
DIP-Switch 1 Power-1 failed warning : (ON) enable, (OFF) disable
DIP-Switch 2 Power-2 failed warning : (ON) enable, (OFF) disable
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input Power Dual DC inputs. 50~57VDC on 6-pin terminal block.
Power consumption (Typ.) 6.2 Watts
Overload current protection Present
Reverse polarity protection Not Present
Physical Characteristics
Enclosure IP-30
Dimensions (W x D x H) 26.1 (W) x 94.9 (D) x 144.3(H) mm (1.03 x 3.74 x 5.68 inches)
Weight (g) 395 g
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8,EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 5 years

Related Posts