Oring IES-A3062FX-MM-SC Industrial C1D2/ATEX 8-port managed Ethernet Switch

by | May 27, 2015 | Industrial Ethernet Switch, ORing

Oring IES-A3062FX-MM-SCIES-3062FX series are managed Redundant Ring Ethernet switches with 6×10/100Base-T(X) and 2x100Base-FX ports which is specifically designed for the C1D2/ATEX certified with hazardous locations requirement. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. Another Open-Ring technology is also supported which can applied for other vendor’s proprietary ring.  IES-3062FX series can be managed centralized and convenient by a powerful windows utility — Open-Vision. In addition, the wide operating temperature range from -40°C to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for highly-managed Fiber Ethernet application.

Feature :

  • Fastest Redundant Ethernet Ring: O-Ring (recovery time < 10ms over 250 units of connection)
  • Open-Ring supports the other vendor’s ring technology in open architecture
  • STP/RSTP/MSTP supported
  • Support PTP Client (Precision Time Protocol) clock synchronization
  • IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
  • Port Trunking for easy of bandwidth management
  • SNMP v1/v2c/v3 support for secured network management
  • RMON for traffic monitoring
  • Support LLDP protocol
  • Port lock to prevent access from unauthorized MAC address
  • Event notification through Syslog, Email, SNMP trap, and Relay Output
  • Windows utility (Open-Vision) support centralized management and configurable by Web-based ,Telnet, Console, CLI
  • Complete combination of 10/100Base-T(X), 100Base-FX, 1000Base-T, 1000Base-SX, and 1000Base-LX ports
  • Rigid IP-30 housing design
  • DIN-Rail and wall mounting enabled

Specification :

ORing Switch Model IES-A3062FX-MM IES-A3062FX-SS
Physical Ports
Fiber Ports Number 2 2
Fiber Ports Standard 100Base-FX 100Base-FX
Fiber Mode Multi-mode Single-mode
Fiber Diameter (μm) 62.5/125 μm
50/125 μm		 9/125 μm
Fiber Optical Connector SC SC
Fiber Ports Specifications Typical Distance (km) 2 km 30 km
Wavelength (nm) 1310 nm 1310 nm
Max. Output Optical Power (dBm) -14 dBm -8 dBm
Min. Output Optical Power (dBm) -23.5 dBm -15 dBm
Max. Input Optical Power(Saturation 0 dBm -3 dBm
Min. Input Optical Power (Sensitivity) -31 dBm -34 dBm
Link Budget (dB) 7.5 dB 19 dB
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX 6 6
Technology
  Ethernet Standards IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.3x for Flow control
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
MAC Table 8192 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switch Properties Switching latency : 7 μs
Switching bandwidth : 1.6Gbps
Max. Number of Available VLANs : 4096
IGMP multicast groups : 1024
Port rate limiting : User Define
Security Feature Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1q ) to segregate and secure network traffic
Supports Q-in-Q VLAN for performance & security to expand the VLAN space
Radius centralized password management
SNMPV1/V2c/V3 encrypted authentication and access security
Software Features STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units
TOS/Diffserv supported Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping for multicast filtering
Port configuration, status, statistics, monitoring, security
SNTP for synchronizing of clocks over network
Support PTP Client (Precision Time Protocol) clock synchronization
DHCP Server / Client support
Port Trunk support
MVR (Multicast VLAN Registration) support
Network Redundancy O-Ring
Open-Ring
STP
Warning / Monitoring System Relay output for fault event alarming
Syslog server / client to record and view events
Include SMTP for event warning notification via email
Event selection support
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable. Baud rate setting: 9600bps, 8, N, 1
LED Indicators
Power Indicator Green : Power LED x 3
Fault Indicator Amber : Indicates PWR1 or PWR2 failure occurred
R.M. Indicator Green : Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator Green : Indicates that the system is operating in O-Ring mode
10/100Base-T(X) RJ45 Port Indicator Green for port Link/Act. Amber for Duplex/Collision
10/100/1000Base-T(X) RJ45 Port Indicator Green for port Link / Act Amber for 100Mbps indicator
Power
Redundant Input Power Triple DC inputs. 12~48VDC on 7-pin terminal block, 12~45VDC on power jack
Power Consumption (Typ.) 7 watts 7 watts
Overload Current Protection Present
Reverse Polarity Protection Present on terminal block
Physical Characteristics
Enclosure IP-30
Dimensions (W x D x H) 52(W)x106.1(D)x144.3(H) mm
Weight (g) 740 g 740 g
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals
EMI FCC Part 15, CISPR (EN55022) class A,
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1, UL 508 (E331061), UL/cUL Class 1 Division 2 Group A/B/C/D, ATEX Class 1 Zone 2
Warranty 5 years

Related Posts