IES-2060/2042FX series are lite-Managed Redundant Ring Ethernet switches with 6×10/100Base-T(X) ports or 4×10/100Base-T(X) and 2x100Base-FX ports. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring, O-Chain and STP/RSTP (IEEE802.1w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IES-2060/2042FX series can be managed centralized and convenient by a powerful windows utility — Open-Vision. In addition, the wide operating temperature range from -40°C to 70°C can satisfy most of operating environment. Therefore, these switch is one of the most reliable choice for easy managed Fiber Ethernet application.
Feature :
- Fastest Redundant Ethernet Ring: O-Ring (recovery time < 10ms over 250
units of connection) - Open-Ring supports other vendor’s ring technology in open architecture
- Multiple Redundant Ethernet technology RSTP/STP, O-Ring supported to protect
your industrial network - Provides Fast recovery technology for Ethernet multi-redundancy
- O-Chain support the multiple redundant ring technology
- SNMP v1/v2c/v3 ,http server, telnet server support
- Supports LLDP protocol
- Configurable by Web-based and Windows utility (Open-Vision)
- Event notification through Syslog, Email, and SNMP trap
- Two 100Base-FX fiber ports support for long distance connection
- Rigid IP-30 housing design
- DIN-Rail and wall mounting enabled
Specification :
ORing Switch Model | IES- 2042FX-MM-SC | IES- 2042FX-SS-SC | |
Physical Ports | |||
Fiber Ports Number | 2 | 2 | |
Fiber Ports Standard | 100Base-FX | 100Base-FX | |
Fiber Mode | Multi-mode | Single-mode | |
Fiber Diameter (μm) | 62.5/125 μm 50/125 μm | 9/125 μm | |
Fiber Optical Connector | SC | SC | |
Fiber Ports Specifications Typical Distance(km) | 2 km | 30 km | |
Wavelength (nm) | 1310 nm | 1310 nm | |
Max. Output Optical Power (dBm) | -14 dBm | -8 dBm | |
Min. Output Optical Power (dBm) | -23.5 dBm | -15 dBm | |
Max. Input Optical Power (Saturation) | 0 dBm | 0 dBm | |
Min. Input Optical Power (Sensitivity) | -31 dBm | -34 dBm | |
Link Budget (dB) | 7.5 dB | 19 dB | |
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX | 4 | 4 | |
Technology | |||
Ethernet Standards | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3x for Flow control IEEE 802.1D for STP (Spanning Tree Protocol) IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) |
||
MAC Table | 2048 MAC addresses | ||
Priority Queues | 4 | ||
Processing | Store-and-Forward | ||
Switch Properties | Switching bandwidth : 1.2Gbps VLAN : Port Based |
||
Security Feature | Enable/disable ports VLAN to segregate and secure network traffic |
||
Software Features | STP/RSTP (IEEE 802.1D/w) Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units DHCP Client Port base VLAN LLDP (Link Layer Discovery Protocol) Port configuration, status, statistics, monitoring, security SNMP v1/v2c/v3 and private MIB support |
||
Network Redundancy | O-Ring Open-Ring O-Chain STP RSTP Fast recovery |
||
Warning / Monitoring System | Relay output for fault event alarming Syslog server / client to record and view events Include SMTP for event warning notification via email Event selection support |
||
LED Indicators | |||
Power Indicator | Green : Power LED x 3 | ||
Fault Indicator | Amber : Indicates unexpected events occurred | ||
R.M. Indicator | Green : Indicates that the system is operating in O-Ring Master mode | ||
O-Ring Indicator | Green : Indicates that the system is operating in O-Ring mode | ||
10/100Base-T(X) RJ45 Port Indicator | Green for port Link/Act. Amber for Duplex/Collision | ||
100 Base-FX Fiber Port Indicator | Green for port Link / Act Amber for 100Mbps indicator | ||
Fault contact | |||
Relay | Relay output to carry capacity of 1A at 24VDC | ||
Power | |||
Redundant Input Power | Triple DC inputs. 12~48VDC on 7-pin terminal block, 12~45VDC on power jack | ||
Power Consumption (Typ.) | 7 watts | 7 watts | |
Overload Current Protection | Present | ||
Reverse Polarity Protection | Present on terminal block | ||
Physical Characteristics | |||
Enclosure | IP-30 | ||
Dimensions (W x D x H) | 52(W)x106.1(D)x144.3(H) mm | ||
Weight (g) | 670 g | 670 g | |
Environmental | |||
Storage Temperature | -40 to 85°C (-40 to 185°F) | ||
Operating Temperature | -40 to 70°C (-40 to 158°F) | ||
Operating Humidity | 5% to 95% Non-condensing | ||
Regulatory Approvals | |||
EMI | FCC Part 15, CISPR (EN55022) class A, | ||
EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 | ||
Shock | IEC60068-2-27 | ||
Free Fall | IEC60068-2-32 | ||
Vibration | IEC60068-2-6 | ||
Safety | EN60950-1 | ||
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) | 345,432 | 346,491 | |
Warranty | 5 years |